-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
Our DF196 Series delivers direct illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
-
This dark field ring light is more directional and less diffuse than the DF198.
-
Available in 4 sizes with an intesity of 72kLux (working distance of 25mm with DF196-100)
Junkosha - 1 Series cables - Wide Temperature Range, Slim and Durable
-
MWX121 - Heat Resistant - offers a wide temperature range from -65 to +125°C.
-
MWX122 - High Durability - offers excellent cable durability against repeated bending.
Cable type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous operating temperature (°C) |
Assembly length (mm) |
||
---|---|---|---|---|---|---|---|---|
18.5GHz |
Maximum frequency |
Min |
Max |
|||||
MWX121 |
26.5 GHz |
1.2 |
1.3 |
6.6 |
80 |
-65~+125 |
200 |
5000 |
MWX122 |
1.5 |
1.9 |
6.5 |
79 |
-65~+85 |
300 |
3000 |
|
MWX161 |
67 GHz |
3.5 |
7.3 |
6.5 |
79 |
-65~+125 |
600 |
1500 |
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- MWX121, MWX161: Suitable for a wide continuous operation temperature range (-65°C to +125°C) in microwave measurement environments
- MWX122: Dramatically improved mechanical life
Use
- For microwave band measurements requiring a wide temperature range (device assessment, etc.)
- Testing equipment requiring durability
- Multiport vector network analyzers
Slim Phase Stable
Cable MWX161 Cable assemblies with a small diameter at the neck, making it the most suitable for a Multiport VNA.
Heat Cycle Test for MWX121
The cycle indicated above chart was repeated 30 times. We measured the insertion and return loss of the specimen that was taken out from the tester after the 30 cycles.
Composite Durability Test for MWX122
We measured the insertion loss and observed the shield after the composite durability test that applies 50,000 times of bending, rubbing, and twisting.
More Product Information
-
High Power Density: Up to 15 kW in 3U, 30kW in a 6U chassis
-
Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
-
Fast Load Transient Response: Protection from undesired voltage excursions
-
Low Ripple and Noise
-
Intuitive Touch Screen Display
-
Parallelable up to 150 kW
-
Sequencing: Freesystem controller & speed up test
-
Low audible noise: Temperaturecontrolled variable speed fans
-
Supports link widths up to and including 4-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 4-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power Supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Precise programming of voltage and current slew rate for sensitive loads.
-
Industrial field bus interface (Modbus-TCP, Modbus-RTU, Ethernet) enable real-time digital control.
-
Built in power quality monitoring detects and saves input voltage anomalies which can be saved for later diagnostic analysis.
-
Programmable analog interface scaling facilitates integrating the ASD FLX with existing systems easily.
-
Built-in energy meter calculates the delivered energy throughout a process or period of time.
-
Optional real time clock enables accurate timestamping of events.
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Guarantees fully-guarded measurements to fA and fF levels
-
Individual connectors provide force-sense connection for quasi-Kelvin and CV measurements
-
Allows probing of different pad materials and sizes
-
Fast replacement of worn probes without the need for tools
Junkosha, Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177