-
The Wide Linear Diffuse Light series is ideal for the inspection of elongated or cylindrical objects.
-
Perfect for inspections requiring a multi-camera setup.
-
Can be provided with up to 4 viewing ports.
-
Expandable lengths from 6” – 36” (152 – 194mm) in 6” increments.
Junkosha - 2 Series cables - Extra Flexibility and Durability
Our 2 Series cable assembly showcases excellent phase stability against bending, developed with microwave/mmWave measurement environments in mind.
Its flexibility means low repulsion, reducing the load on the measured object
Cable Type |
Maximum Usable Frequencies |
Standard Insertion Loss (dB/m) |
Outer Cable Diameter (mm) |
Cable Weight (g/m) |
Continuous Operating Temperature Range (°C) |
Assembly Length (mm) |
Notes |
||
---|---|---|---|---|---|---|---|---|---|
18.5GHz |
Maximum Frequency |
Minimum |
Maximum |
||||||
MWX221 |
26.5 GHz |
1.2 |
1.4 |
6 |
64 |
-30~+85 |
200 |
5000 |
Standard Catalog Product |
MWX221 Armored Type |
12.5 |
212 |
700 |
5000 |
Standard Catalog Product |
||||
MWX241 Armored Type |
40.0 GHz |
1.8 |
3 |
9.5 |
137 |
700 |
5000 |
Standard Catalog Product |
|
MWX241 Non-Armored Type |
4.1 |
35 |
200 |
5000 |
Made to Spec |
||||
MWX251 Armored Type |
50.0 GHz |
2.1 |
3.8 |
9.5 |
129 |
700 |
1500 |
Standard Catalog Product |
|
MWX251 Non-Armored Type |
3.7 |
29 |
200 |
1500 |
Made to Spec |
||||
MWX261 Armored Type |
67.0 GHz |
2.9 |
5.6 |
7.7 |
90 |
700 |
1500 |
Standard Catalog Product |
|
MWX261 Non-Armored Type |
2.6 |
17 |
200 |
1500 |
Made to Spec |
This table provides standard length availability within our catalog. We can provide custom lengths upon request; please contact us to discuss.
Features
- Excellent flexibility and phase stability against bending
- We also have an extensive lineup of connectors
- Select an armored type for reduced external mechanical damage
Use
- For mmWave/microwave band measurement
- For measurement of minute devices for which flexibility is required
Flexibility Data
A test cable measuring 1,000 mm in length was formed into a circle with an internal diameter of 300mm. Both ends were overlapped and secured with tape measuring 50 mm in width. The circularly formed test cable was then suspended, with the overlapping end section at the top and a weight positioned at the bottom. Circularity was measured after five seconds. (Circularity is expressed as the ratio a/b.)
More Product Information
-
Fiber coupled to allow easy movement
-
Ultra-broadband measurement
-
Transmitted or reflected data collection
-
Mates with collinear adapter (AXA40n1)
-
High signal to noise ratio
-
Hot swappable with other transmitters
-
Low noise to enable rapid data collection
-
Adjustable lens tube for focusing
-
Multiple lenses available
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
- Reliably and efficiently acquire at up to 25 Gigabit/s per port through onboard packet processing
- Maintain maximum flexibility with support for generic GigE Vision cameras
- Readily and cost-effectively support multi-camera setups through two ports, together capable of handling up to 32 cameras
- Cater to a range of cabling needs with support for copper and fiber-optic Ethernet cabling
- Directly license Aurora software, formerly Matrox Imaging Software, with integrated license fingerprint and storage
- Monitor and troubleshoot acquisition performance in detail using Aurora Gecho event-logging tool
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1-link of 4-lanes, or 2-links of 2- lanes
-
Adjustable tray clamps and quick-release latch allow for snug fit and quick SSD swap
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supplied with high-quality, custom SFF-8764 cables for analyzer system attachment
-
Supports side-band signal capture and triggering
-
Supplied power brick makes interposer power independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analysis tools for trace capture with flexible filters, triggers and more
-
Provides consistent, repeatable capture of link training, negotiation and other data
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
Junkosha Inc.
Junkosha is a pioneer of sophisticated fluoropolymer application technologies across a broad selection of industries, including the microwave interconnect sectors.
Our mantra – indeed the name Junkosha – is based on three Japanese characters that spell out the fact “we contribute to society’s development through technology”. This is taken one step further in our relationship with customers, partners and suppliers whereby our mission is to “enable technology innovators” through our products and the way we do business.
Reflecting our corporate motto of “delivering unsurpassed value,” Junkosha continually focusses on activities that address the unmet needs of our customers worldwide. Across the company, Junkosha delivers products that are of the highest quality, this in turn calls for the highest performance and diligence from staff and partners. In order to realize this, Junkosha strives to anticipate customer needs while achieving complete customer satisfaction. Every day, we are challenged to “develop advanced technologies”, “improve our products’ capabilities", and “seek new applications”. We respond to our customer’s requirements quickly, responsively and cost effectively.
Contact Details
Junkosha Inc. Japan Office - Tokyo Business Center
15F Ochanomizu-Kyoun Bldg., 2-2 Kanda-Surugadai, Chiyoda-ku, Tokyo, 101-0062, Japan
Phone: +81-3-3518-6520
Fax: +81-3-3518-6523
Junkosha USA Inc. West Coast Office
2415 Campus Drive, Suite 140, Irvine, CA 92612, USA
Phone: +1-949-825-6177