Luna - T-Ray® 5000 Series HSC50yn Compact Industrial Sensor
The HSC50yn is designed for industrial applications that require a smaller footprint, a lighter weight or two output beams.
Some applications for an Industrial Sensor require a smaller footprint, a lighter weight or two output beams. These capabilities are met by the HSC50yn, which capitalizes on the new single fiber lighter weight umbilical, and a more compact design, to allow robot mounting. With proper attention to the configuration it can be used to inspect two points on the same object. In the case of small diameter tubing, this can even be used to measure 4 orthogonal points at the same time.
| Polarization Extinction Ratio | >20:1 (Horizontal) |
|---|---|
| Available Lens Focal Length | 25, 75, 150 mm |
| Beam Diameter | 40 mm |
| Mounting Hardware | 1/4 - 20 Threaded mounting holes |
| Operating Temperature Range | 0 - 50 °C (20 - 90% RH non-condensing) |
| Size (W x H x D) | 76 x 67 x 152 mm |
| Weight | 1.1 kg |
Applications
More Product Information
-
High Power Density (2 VA/cubic inch)
-
Single or multi-phase output
-
Parallel operation
-
4.8 Crest factor
-
Digital control loop technology
-
≥0.95 PFC
-
Brown-out simulation
-
AC 875 VA
-
45 to 5000 Hz
-
Universal AC/DC input via mainframe
-
User configurable
-
Simple integration
-
Up to 450mm measurement range using a 1 mm stainless steel cable
-
Rugged aluminum enclosure with IP65 rating; suitable for outdoor installations
-
Internal protection of connectors/splices
-
Double-ended design supports multiplexing of many gages on one fiber
-
Fully temperature compensated over the entire operating range
-
Fast response time, stable measurements, high resolution
-
High Port Count
-
Rapid Switching Time at 30 ms
-
Low Insertion Loss (< 1.5 dB)
-
Low Wavelength Dependent Loss (< 0.3 dB)
-
O, C and L band operation
-
USB 2.0 Interface
-
Full transceiver functionality
-
Collinear design
-
Low cost plastic lens
-
Hardened case for industrial environment
-
Use to measure layer thickness
-
Use to produce scanned images
-
Single high flex umbilical
-
Variety of focal lengths available
-
Capable of being cleaned
-
Supports VRS functionality
-
5000VA, 4000W, 115VAC 50/60Hz Input and 120VAC 60Hz Output, Double Conversion, On Line, High Temperature, Isolated, Rugged UPS with Power Factor Correction for Shipboard Applications
-
High efficiency: up to 88 %
-
Low no load power consumption < 100 mW
-
Meets DoE efficiency level VI
-
CoC version 5 ready
-
Ultra-low leakage current ≤ 10 μA
-
IEC 60950-1
-
Wide operating temperature range 0 - 45°C
-
Double housing safety: snapped & welded
-
IP42 approved interchangeable plug system as additional accessories
-
Also available as version with fixed plugs: FOX30-F
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Trigger over Ethernet Action Commands allow for a single cable solution to reduce system cost
-
IEEE 1588 Precision Time Protocol allows for easy synchronization of multiple cameras and devices on network
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba SDK and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
Luna Innovations
Luna Innovations mission is to help advance the continuing increase in data transmission rates for the public & private communications network with high speed optical receivers and test products, while also leveraging our unique fiber optic sensing technology to improve the structural testing of new composite elements and components in new aircraft and automobiles.
Luna Innovations Incorporated (NASDAQ: LUNA) was founded in 1990 and has been successful in taking innovative technologies from the applied research stage to product development and ultimately to the commercial market. In some cases, the successes led to the creation of independent businesses. We have created companies in our area of focus, sold some of them to industry leaders in their fields, raised private capital, formed joint ventures and entered into a number of licensing agreements.
Contact Details
Luna Innovations Inc.
301 1st Street, SW, Suite 200, Roanoke, VA 24011, USA
Phone: 540-769-8400
Test & Measurement
Download Line Card
Document
