-
The DF241 is characterized as a Small Low Angle Dark Field ring light.
-
Precisely aimed LEDs provide a very low angle of incidence, radial illumination pattern.
-
A scratch on a sheet of glass is a good example of a defect that can be detected with a low-angle dark field illuminator.
-
With a light intensity of 24kLux at a working distance of ½” (12.5mm), the DF241 is perfect for imaging problems limited to a small field of view.
-
A 25mm field of view is standard with an optional field of view of 35mm.
-
Available in a range of wavelengths from UV to IR.
-
*Engineered to provide comparable optical characteristics to our previous RL1360.
Navitar - Optical Wizard
More Product Information
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Extended near-infrared (X-2620B NIR) model
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
Single measurement, all-parameter analysis
-
Full characterization of components in less than 3 seconds
-
Complete polarization response
-
With single scan, simultaneously measure loss, polarization, dispersion, phase and time domain response
-
Available for C and L band, or O band
-
16 way Optical GPS/GLONASS Antenna Distributor
-
Dual Redundant Power Supplies
-
Alarm Output
-
Run secure GNSS antenna feeds within buildings up to 2000m
-
Easy and fast setup of camera views
-
Go to Light and Image Settings of the selected camera view with only one mouse click
-
Guided workflows for wafer setups, alignment tools and Autonomous Assistants
-
Workflow wizard shows task-relevant settings and options only
-
Visualizes the progress of setup, alignment and measurement tasks
-
Status information always at hand
-
Informs the user about events, for example “Successful Alignment”
-
Interacts with the user and helps with intelligent solutions
-
For very complex wafer structures
-
Enables automatic test of multiple devices in each die location before stepping to the next die
See more Key Features on Specifications & Details tab
-
Verify quality of optical fiber cable assemblies, connectors and short-run networks
-
Troubleshoot and distinguish between macro-bends, splices, connectors and breaks
-
Locate insertion loss points – save hours of troubleshooting time
-
Verify return loss of multiple points in a fiber assembly or harness simultaneously
-
Verify and maintain aircraft and shipboard networks
-
Customize GUI for automated pass/fail verification of your fiber assembly using software development kit
Teledyne LeCroy's wide-band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. Their broad wavelength range and multi-mode input optics make these devices ideal for applications including Ethernet, Fibre Channel, and ITU telecom standards. Available to support optical data rates up to 11.3 Gb/s with reference receivers, or slightly higher without reference receivers.
FormFactor's FRT Metrology engineers designed SurfaceSens technology to achieve superior information about the measured sample and greater insights about product quality. All of our FRT MicroProf® metrology tools can be configured with complementary sensor technologies. In a hybrid analysis process, otherwise inaccessible surface data of wafers or other samples are precisely measured.
-
Full C-band tunability
-
Integrated wavemeter with sub-picometer accuracy
-
Smooth, linear scans
-
Narrow linewidth, low noise
-
External triggering
-
2 optical detectors and data acquisition channels
-
Industry leading wavelength accuracy and resolution
-
USB interface and full complement of software drivers