NEO NXB - 12020A Voltage / Current Breakout Test Box
- On-Off power switch
- 20 A Circuit Breaker
- 8’ Flexible Power Cord
- Outlets – (4) 5-20R
Test Tap:
- 3ft.
- (2) fork terminals (current)
- (1) fork terminals (ground)
- (2) Shielded Banana (voltage)
Multiple outlets provide flexibility in connecting equipment under test. Tester pigtail interface simplifies connecting to a variety of voltage/current measuring systems.
Voltage | Current | Input | Output | Test Output | Switch/Breaker |
120/240 | 20A | AC Line - Cord | 5-20 R [4] | Pigtail | Yes |
Application
More Product Information
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
One Pod supports link widths of up to 4-lanes. Multiple pods can expand link widths up to 16-lanes.
-
Downward compatible with PCIe 1.0 to 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Eight differential probe cables support simultaneous upstream and downstream capture
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-sensitivity amplifiers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal triggering and capture
-
Interposer power is independent of host system.
-
Power supply, 120/220 input, 12V/3A output
-
LEDs provide quick indication of power and status
-
Size: 170 x 107 x 34 mm (6.7 x 4.2 x 1.3 in)
-
Works together with multiple VIAVI Xgig PCIe Analyzer chassis types
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
The OVA simultaneously performs these optical component characterizations every 3 seconds:
-
Insertion Loss (IL)
-
Return Loss (RL)
-
Polarization Dependent Loss (PDL)
-
Phase Response
-
Group Delay (GD)
-
Chromatic Dispersion (CD)
-
Polarization Mode Dispersion (PMD) / Second Order PMD
-
Min/Max Loss due to Polarization
-
Impulse Response
-
Jones Matrix Elements
-
Phase Ripple – Linear and Quadratic
The system detects position of the magnetic field sensor on the basis of the image on the camera first of all and then, recognizes strength of the signal that is measured by the sensor upon frequency analysis of the signal almost simultaneously. Finally, visualization of the strength level in composition with the real image of the measured object can be realized on screen of PC in form of heat map in colors.
-
High responsiveness following to the image can be realized because of the image recognition setting according to colors on the sensor part.
-
Composite strength distribution of the actual image taken by the camera and the measured data can be visualized.
- Capture from legacy to the latest video sources through support for SD analog to UHD digital formats
- Connect and switch between different video sources via Mini DisplayPort, HD-BNC, HDMI, and custom analog DVI1 connectivity
- Handle multiple video sources with the simultaneous capture of up to eight HD or two UHD streams2
- Optimize video transmission and storage through onboard multi-stream H.264 encoding
- Minimize system footprint by way of a single-slot PCIe card design
- Simplify application development using the Aurora Imaging Library, formerly Matrox Imaging Library (MIL), software development kit (SDK)
- Deploy on a current platform of choice with support for 64-bit Windows® 7/10 and Linux
NEO
NEO offers a line-up of Power measurement breakout boxes designed for use with Yokogawa's precision power analyzers.
Test & Measurement
Download Line Card
Document