NEO NXB - 12030 Voltage / Current Breakout Test Box
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L5-30
-
Outlets – NEMA L5-30R
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
Single output for passthrough to test rack. Tester pigtail interface simplifies connecting to a variety of voltage/current measuring systems.
Voltage | Current | Input | Output | Test Output | Switch/Breaker |
208 | 30A | L6-30 - Cord | L6-30R | Pigtail | Yes |
More Product Information
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
-
Verify quality of optical fiber cable assemblies, connectors and short-run networks
-
Troubleshoot and distinguish between macro-bends, splices, connectors and breaks
-
Locate insertion loss points – save hours of troubleshooting time
-
Verify return loss of multiple points in a fiber assembly or harness simultaneously
-
Verify and maintain aircraft and shipboard networks
-
Customize GUI for automated pass/fail verification of your fiber assembly using software development kit
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
-
Interface-independent
-
Simple image acquisition of greyscale, color, and temperature images
-
Comprehensive camera control
-
Statistical image evaluation
-
Save as RAW, TIF, BMP, AVI, and more file formats
-
Pseudo color IR image display inclusive temperature measurement
-
Simultaneous analysis of several user-defined ROIs
-
Support for important image pre-processing functions (look-up tables, background correction, mirroring etc.)
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
- Improves your QA through configurable logging
- Allows you to retain power of control on how boards are tested by third parties
- User-friendly environment reduces your training costs for production operatives
- Ability to test multiple boards, simultaneously, by using multiple XJLinks
NEO
NEO offers a line-up of Power measurement breakout boxes designed for use with Yokogawa's precision power analyzers.