NEO NXB - 20830 Voltage / Current Breakout Test Box
-
On-Off power switch
-
30 A Circuit Breaker
-
Inlet - NEMA L6-30
-
Outlets – NEMA L6-30R
Test Tap:
-
3ft.
-
(2) fork terminals (current)
-
(1) fork terminals (ground)
-
(2) Shielded Banana (voltage)
Single output for passthrough to test rack. Tester pigtail interface simplifies connecting to a variety of voltage/current measuring systems.
Voltage | Current | Input | Output | Test Output | Switch/Breaker |
208 | 30A | L6-30 - Cord | L6-30 R | Pigtail | Yes |
Application
More Product Information
The system detects position of the magnetic field sensor on the basis of the image on the camera first of all and then, recognizes strength of the signal that is measured by the sensor upon frequency analysis of the signal almost simultaneously. Finally, visualization of the strength level in composition with the real image of the measured object can be realized on screen of PC in form of heat map in colors.
-
High responsiveness following to the image can be realized because of the image recognition setting according to colors on the sensor part.
-
Composite strength distribution of the actual image taken by the camera and the measured data can be visualized.
-
Interposers: x8 and x16 Slot, x4 Flying Lead pod, x4 M.2, x4 U.2 (available in dual port), and x16 SFF-8644
-
1U+ chassis with 128GB memory (64GB upstream and 64GB downstream)
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneously Analyze and Jam on a single chassis using one interposer
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
The Tap Upstream and Downstream ports allow AJA configuration Jamming
-
Cascade up to 4 Xgig captures into a single trace view
-
Full support of LTSSM for PCI Express
-
Memory segmentation for capture of multiple traces
-
Field replaceable modular fan and power supply assemblies
-
Portable, lightweight, and stand-alone
-
One-year hardware and three-year software warranties for the Xgig 4K16 PCI Express 4.0 Protocol Analyzer/Jammer
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
The OVA simultaneously performs these optical component characterizations every 3 seconds:
-
Insertion Loss (IL)
-
Return Loss (RL)
-
Polarization Dependent Loss (PDL)
-
Phase Response
-
Group Delay (GD)
-
Chromatic Dispersion (CD)
-
Polarization Mode Dispersion (PMD) / Second Order PMD
-
Min/Max Loss due to Polarization
-
Impulse Response
-
Jones Matrix Elements
-
Phase Ripple – Linear and Quadratic
The FA7000 series Field Analyzers are specifically designed to measure modulated electric fields. Each kit provides a web-based, oscilloscope-type display of the instantaneous electric field strength or power density over time and calculates the minimum, maximum, and average field strength of the waveform as displayed. Each kit consists of an isotropic Field Sensor, glass fiber-optic cabling, a miniature tripod, carrying case, and a Processor Unit. The Processor Unit stores all of the necessary linearity corrections for its associated Field Sensor.
NEO
NEO offers a line-up of Power measurement breakout boxes designed for use with Yokogawa's precision power analyzers.
Test & Measurement
Download Line Card
Document