NH Research - 5500 Series Universal UPS Test System - Universal UPS/Inverter Test System for Testing Power Supplies with AC Outputs Found in Uninterruptable Power Supplies (UPS) & Inverters

NH Research - 5500 Series Universal UPS Test System - Universal UPS/Inverter Test System for Testing Power Supplies with AC Outputs Found in Uninterruptable Power Supplies (UPS) & Inverters
  • Digital measurement system (DMS)
    – 2 waveform digitizers
    – 2×16, 100MHz multiplexer
    – Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    emPower™ test executive

More

Applications

The UPS/Inverter Test System or UPS Test System, model 5500, is a turn-key, high performance, universal test platform which is ideal for testing power supplies with AC outputs typically found in uninterruptable power supplies (UPS) and inverters.

A wide range of AC and DC stimulus instrumentation combined with advanced measurement capabilities make the 5500 test system an ideal solution for the enterprise requiring the most flexibility in test capability.

More Product Information

NH Research - 5600 Series Universal Test System - for Testing Power Supplies with DC Outputs
  • Maximum configuration flexibility with multi-bay capacity
  • Digital measurement system 2 Waveform digitizers and 2×16, 100 MHz multiplexer
  • Expandable input measurement channels
  • Common interface panel
  • emPower™ Test Executive

NH Research - 5710 Series Engineering Characterization Test System - DC Power Supply Test System for Engineering Characterization/Design Verification Testing, Power Supplies Testing, Defense Avionics Testing, & More!
  • NEW! Tektronix MDO-Series Mixed Signal Oscilloscope
  • Unlimited voltage, current & timing measurements relative to digital signals.
  • Library of design verification test routines reduces program development time
  • Configuration flexibility

NH Research - S600 Series Multi Channel Power Supply Tester - Multi-Channel Test System for High-Speed Parallel Testing of Adapters, Chargers, LED Power Drivers, DC Converters, Voltage Regulator Modules, Point-of-Load Converters & AC-DC Power Supplies
  • Maximum test throughput through parallel testing of multiple devices & outputs
  • Ease of reconfiguration or expansion through front-loading, card-based instruments
  • Built-in waveform digitizers on all instruments
  • Space-saving design
  • emPower® Test Executive

NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!
  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Bidirectional DC Source, expandable from 12 to 252kW with 40, 120, or 600V
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

NH Research - S450 Series Functional Test System - Production Test Systems for High Speed Power Supply Testing
  • Preconfigured fully-capability test system in a 35” rack
  • Interchangeable DC loads and sources
  • Embedded Measurement System (EMS)
    – 100 kSamp/s waveform capture
    – 12 channel measurement system
  • emPower™ test executive control
    – PC/Serial interface
    – USB-Serial ∓ LAN-Serial available

NH Research - 9300 Series High-Voltage Battery Test System - Modular, Regenerative Battery Test System with Power Range from 100kW up to 2.4MW
  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research - S400 Series Modular Test Systems - for Power Supply Production Testing, High Speed Testing, & More!
  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

NH Research - 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System - Regenerative Battery Cycler, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • Regenerative, 87% efficiency returning discharge power to facility
  • Bidirectional DC Source, Battery emulation and burn-in applications
  • Crane/hoist lifting hangers & robust casters

NH Research - 9420 Series AC Power Source - AC Source with HiVAR® Technology Ideal for ATE use in Aviation, Aerospace, Defense, Military/Mission Critical Testing, Manufacturing Test, Research & Development & More!
  • Voltage Range – 175/350VRMS, 200/400VDC
  • 7 models – 8kW/21kVA to 96kW/252kVA
  • Unique configuration flexibility provides for single, split, three-phase operation plus full-power DC
  • HiVAR design eliminates derating nominal power due to reactive loads
  • Frequency – 30 to 880Hz
  • High-resolution waveform digitizer & scope display
  • Precision ultra-low current measurements
  • Seamless, constant-power operating envelope
  • Built-in 9” touch-panel user interface for manual control & measurement display
  • Graphical waveform editor for user-defined waveforms
  • High-level line disturbance programming Macros
  • External PC option to host NHR emPower® Test Sequencer
  • Alternate programming in LabVIEW, native SCPI, & other IVI-compliant languages
  • Improved power density results in half the panel height of a traditional AC source