NH Research - 5710 Series Engineering Characterization Test System

NH Research - 5710 Series Engineering Characterization Test System
  • NEW! Tektronix MDO-Series Mixed Signal Oscilloscope
  • Unlimited voltage, current & timing measurements relative to digital signals.
  • Library of design verification test routines reduces program development time
  • Configuration flexibility

More

The Engineering Characterization Test System, model 5710, is designed to yield comprehensive test data on a wide range of AC-DC and DC-DC power supplies with a minimum of programming effort. Such characterization testing is typically done in an engineering design-verification laboratory where the user’s own designs or vendor prototypes are evaluated. This type of extensive testing is also often required for high-reliability power supplies used in medical, telecommunication, space and avionic applications.

PowerScope High Speed Digitizer

The Model 5710 embeds a mixed-signal Tektronix MDO-Series oscilloscope as the system digitizer with three channels each of which can sample up to a 2.5 GSPS rate. The digitizing function is further extended by paring two of the channels with a 16-channel multiplexer thus allowing automated selection and measurement of different measurement points. When more than 17 inputs are required, multiple 15-input extension chassis may be added to the system further increasing the multiplexing capability.

With a full 100 MHz of bandwidth, the primary multiplexing channel as well as the third fixed input channel precisely captures and digitizes fast moving signals. The second multiplexing channel supports 10 MHz bandwidth making it ideal for measuring DC and other slower moving signals. In mixed signal applications, a 16-input digital input captures digital signals along with analog measurements. All of the above measurements are synchronously captured, which provides complex analog-analog or analog-digital timing analysis. Finally, a 10 Mega-sample memory depth easily captures non-repetitive transients as well as digital states even when they occur with a relatively long separation from the trigger event.

Design Verification Test Routines

To complement the powerful digital measurement system, a special suite of test routines are provided to determine power supply performance characteristics far beyond that available on a basic production tester. For instance, more than 20 different measurements can be extracted from each waveform capture and channel-to-channel measurements are all straight forward to execute. One example of this capability is sweep tests where one parameter, such as efficiency, is plotted across the full range of another parameter like output voltage or power. This test can now be programmed and executed in minutes rather than the hours and days required by previous generation test systems.

More Product Information

NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!
  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Bidirectional DC Source, expandable from 12 to 252kW with 40, 120, or 600V
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

NH Research - 9300 Series High-Voltage Battery Test System - Modular, Regenerative Battery Test System with Power Range from 100kW up to 2.4MW
  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research - S450 Series Functional Test System
  • Preconfigured fully-capability test system in a 35” rack
  • Interchangeable DC loads and sources
  • Embedded Measurement System (EMS)
    • 100 kSamp/s waveform capture
    • 12 channel measurement system
  • emPower™ test executive control
    • PC/Serial interface
    • USB-Serial ∓ LAN-Serial available

NH Research - 5500 Series Universal UPS/Inverter DC Power Supply Test System
  • Digital measurement system (DMS)
    • 2 waveform digitizers
    • 2×16, 100MHz multiplexer
    • Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    • emPower™ test executive

NH Research - 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System - Regenerative Battery Cycler, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • Regenerative, 87% efficiency returning discharge power to facility
  • Bidirectional DC Source, Battery emulation and burn-in applications
  • Crane/hoist lifting hangers & robust casters

NH Research - S400 Series Modular Test Systems
  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

VIAVI - IFF-7300S Series IFF/Crypto/TACAN Automated Test System
Features
  • Tests MARK XIIA IFF transponders and interrogators
  • Tests TACAN receiver-transmitters
  • Can be configured to test KIV-77 and KIV-78 crypto appliqués
  • Large Touch-screen color display
  • Manual or automated testing
  • Test reports are automatically generated
  • Includes industry leading VIAVI proprietary THORsi Test Executive
Benefits
  • Ease of use - navigating between test modes is as easy as pushing a button. 
  • Affordable – no need to purchase multiple stations that take up valuable lab space; purchase only the Test Program Sets (TPS) you need today
  • Expandable - to add test capability, simply purchase additional TPS’s
  • In-house test/repair capability eliminates long delays and reduces number of LRU spares needed

Amplifier Research - SSIEC30V3M - 30 V/m field strength with up to a 3 meter test distance from 80 MHz to 6 GHz Predefined System
The SSIEC30V3M System is designed to develop a 1.5 x 1.5 meter uniform field area (UFA) of up to 54 V/m CW up to a 3m test distance for IEC 61000-4-3 testing from 80 MHz–6 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSIEC30V3M AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.

Amplifier Research - SSIEC30V2M - 30 V/m field strength with up to a 2 meter test distance from 80 MHz to 6 GHz Predefined System
The SSIEC30V2M System is designed to develop a 1.5 x 1.5 meter uniform field area (UFA) of up to 54 V/m CW up to a 2m test distance for IEC 61000-4-3 testing from 80MHz-6GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSIEC30V2M AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.