NH Research - 9200 Series Battery Emulator - Modular, Regenerative Battery Pack Emulator with Power Range from 12kW up to 21 Channels

NH Research - 9200 Series Battery Emulator - Modular, Regenerative Battery Pack Emulator with Power Range from 12kW up to 21 Channels
  • High configuration flexibility
  • Bi-directional DC Source, expandable from 12 to 252kW with 40, 120 or 600V
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Low Output Capacitance for Accurate Battery Simulation
  • Current, Voltage & Mode Transitions <1 mSec
  • Built-in digital measurements with charting & scope displays
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

More

Applications

NHR’s Regenerative 9200 Battery Emulator, or simulator, includes expandable power ranges from 12kW modules up to 252 kW with 40,120 or 600V bi-directional DC loads. This battery emulator provides optimal configuration that enables companies the flexibility to expand power levels as needed. It addresses the evolving battery test requirements for electric vehicles, renewable energy storage and critical power applications.

The 9200 Battery Emulator is ideally suited for applications where maximum battery test system configuration flexibility is needed to cover a broad range of battery voltage, current and power requirements now and in the future. Key differentiating features from other battery emulators, or simulators on the market include high accuracy, modular and scalable power, safety and ease of use.

Advantages

  • Battery emulation using OCV & series resistance
  • Designed for testing & emulating all battery chemistries
    – Automatic energy integration (full & 1/2 cycle)
    – Multiple safety layers to protect UUT
  • Software tools to shorten test development time
    – PC-based Softpanel GUI with charting
    – Supplied LabVIEW & IVI-C/IVI-COM drivers
    – Optional: Enerchron® test sequencer

Benefits

  • Regenerative, returns greater than 90% of power to the facility, which provides significant electrical savings.
  • Modular – full function tester per channel design
  • Parallels for high power testing (up to 144kW)
  • Safely simulate and emulate “Real World” conditions
    – Sub-mS voltage, current, & mode transition times
    – Emulate over/under charged batteries
    – Safely emulate BMS & battery failures
  • Flexible configuration (any 3 modules per system)

More Product Information

NH Research - 9300 Series High-Voltage Battery Test System - Modular, Regenerative Battery Test System with Power Range from 100kW up to 2.4MW
  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!
  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Bidirectional DC Source, expandable from 12 to 252kW with 40, 120, or 600V
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

NH Research - 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System - Regenerative Battery Cycler, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • Regenerative, 87% efficiency returning discharge power to facility
  • Bidirectional DC Source, Battery emulation and burn-in applications
  • Crane/hoist lifting hangers & robust casters

Powergridm - PG3000 – Spare Battery Module 48 VDC – Military Battery Backup System
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights 15 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.

PowerGridm - Battery Expansion Module 48 VDC Output – Military Battery Backup System UPS
  • Connects to any 1500/3000 UPS via VDC Input Connector.
  • Replicates the UPS VDC Input Power Connector for DC power source.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis as the PowergridM 1500 VA UPS.
  • Each BXM provides a minimum of 30+ minutes (Model Dependent).

PowerGridm - Battery Expansion Module – BackPlane 48 VDC Output – Military Battery Backup System UPS
  • Plugs into any available slot in the BPM BackPlane.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 24+ minutes of hold time.

PowerGridm - Battery Expansion Module – BackPlane 24 VDC / 28 VDC Output – Military Battery Backup System
  • Connects to any available slot in the BPM.
  • Hosts 2 removable Cold PakTM battery trays each containing 3 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 27+ minutes of extended power.
  • MIL-STD 1275 compliant for VDC charging of batteries.

NH Research - 9430 Series Regenerative 4-Quadrant AC Load - Regenerative AC Load that Simulates any Inductive, Capacitive, or Resistive Load
  • 8 Sizes – 4 to 96kW
  • Single, Split or Three-Phase programmable
  • 10 to 350VAC
  • 30 to 880Hz
  • DC operation to 10 to 400VDC
  • Reactive power capability 2.6 x Real Power
  • Sink power regenerated back to facility with >90% efficiency
  • Power factor range: -1 to +1
  • Crest factor range: 1.414 to 4.000
  • High-resolution waveform digitizer
  • 9” Touch-Panel user interface
  • High power density/minimum rack space

Powergridm - PG1500 – Spare Battery Module 48 VDC – Mobile Shelter Uninterruptible Power Supply
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights less than 8 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.