NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!

NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!NH Research - 9210 Series Single Channel Battery Test System - Modular, Regenerative Battery Test System for Automated Characterization Testing, Power Cycling Testing, Life-Cycle Testing & More!
  • Smaller footprint makes it easier to move within a lab (roughly half the size of the 9200)
  • Custom waveform/profile generation
  • Sub-mS voltage, current & mode transition times
  • Built-in digital measurements with charting & scope displays
  • Internal controller with software & connections for an external monitor & keyboard
  • Bidirectional DC Source, expandable from 12 to 252kW with 40, 120, or 600V
  • Regenerative, 87% efficiency of discharge power returned to AC mains
  • Multiple safety layers to protect battery being tested
  • Battery emulation & burn-in applications
  • Create, run, monitor, chart & report UUT profiles without writing any code

More

Applications

NHR’s 9200 and 9210 Battery Test Equipment simulates real-world conditions with fast voltage, current and mode transition times. The Regenerative Single Channel Battery Test System (9210 Series) further extends its 9200 family of high-power battery charge/discharge test systems, which are especially suitable for xEV electric vehicle and grid storage battery cycling as well as drive-cycle simulations and grid-energy simulations. NHR’s battery test equipment covers a wide-range of applications such as EV, solar PV, aerospace, energy storage, and critical power industries.

Like the successful 9200 battery pack test system, the new single module test system (9210) uses any of the 40V, 120V, or 600V modular, independent 12kW DC power modules which enable testing of a number of smaller batteries, each with a different test plan, power level and start/stop times. The smaller footprint makes it easier to move within a laboratory and/or manufacturing, allowing the battery test system to be brought to the engineer’s workspace. The modular functionality of the 9210 Single Channel Battery Test system enables additional flexibility along with the key features of the 9200 Series which includes bi-directional DC source/loads, regenerative power cycling, battery emulation, modularity, safety and precision.

Advantages

  • Battery emulation using OCV & series resistance
  • Designed for testing &mp: emulating all battery chemistries
    – Automatic energy integration (full & 1/2 cycle)
    – Multiple safety layers to protect UUT
  • Software tools to shorten test development time
    – PC-based Softpanel GUI with charting
    – Supplied LabVIEW & IVI-C/IVI-COM drivers
    – Optional: Enerchron® test sequencer

Benefits

  • Regenerative, returns greater than 87% of power to the facility, which provides significant electrical savings.
  • Modular – full function tester per channel design
  • Parallels for high power testing (up to 252kW)
  • Safely simulate and emulate “Real World” conditions
    – Sub-mS voltage, current, & mode transition times
    – Emulate over/under charged batteries
    – Safely emulate BMS & battery failures
  • Small footprint for easy movement

More Product Information

NH Research - 9220 Series Low Voltage/High Current Battery Charge/Discharge Test System - Regenerative Battery Cycler, Power Cycling, & Life-Cycle Testing of Low Voltage/High Current Batteries
  • Single output up to 40V/3,600A/72kW per system
  • Parallel expansion up to 7,200A
  • Built-in digital measurements including Ah & kWh
  • Multiple safety layers to protect battery/DUT
  • SCPI, VXI-11, & LabVIEW control via LAN interface
  • NI-Compliant LabVIEW Drivers
  • Regenerative, 87% efficiency returning discharge power to facility
  • Bidirectional DC Source, Battery emulation and burn-in applications
  • Crane/hoist lifting hangers & robust casters

NH Research - 5710 Series Engineering Characterization Test System - DC Power Supply Test System for Engineering Characterization/Design Verification Testing, Power Supplies Testing, Defense Avionics Testing, & More!
  • NEW! Tektronix MDO-Series Mixed Signal Oscilloscope
  • Unlimited voltage, current & timing measurements relative to digital signals.
  • Library of design verification test routines reduces program development time
  • Configuration flexibility

NH Research - 9300 Series High-Voltage Battery Test System - Modular, Regenerative Battery Test System with Power Range from 100kW up to 2.4MW
  • Wide Operating Envelope at 100kW per cabinet
  • Scalable to 1.2MW/4000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research - S400 Series Modular Test Systems - for Power Supply Production Testing, High Speed Testing, & More!
  • Full-capability test system in a 6-slot chassis for interchangeable loads and DC sources
  • 3-sizes of compact, space-saving cabinets
  • Embedded measurement system with 12 input channels and 100kSamp/sec waveform capture
  • emPower™ Test Executive
  • PC-LAN control

NH Research - S450 Series Functional Test System - Production Test Systems for High Speed Power Supply Testing
  • Preconfigured fully-capability test system in a 35” rack
  • Interchangeable DC loads and sources
  • Embedded Measurement System (EMS)
    – 100 kSamp/s waveform capture
    – 12 channel measurement system
  • emPower™ test executive control
    – PC/Serial interface
    – USB-Serial ∓ LAN-Serial available

NH Research - 5500 Series Universal UPS Test System - Universal UPS/Inverter Test System for Testing Power Supplies with AC Outputs Found in Uninterruptable Power Supplies (UPS) & Inverters
  • Digital measurement system (DMS)
    – 2 waveform digitizers
    – 2×16, 100MHz multiplexer
    – Expandable input measurement channels
  • Maximum configuration flexibility
  • Turn-key test system with included test controller
    emPower™ test executive

NH Research - 5600 Series Universal Test System - for Testing Power Supplies with DC Outputs
  • Maximum configuration flexibility with multi-bay capacity
  • Digital measurement system 2 Waveform digitizers and 2×16, 100 MHz multiplexer
  • Expandable input measurement channels
  • Common interface panel
  • emPower™ Test Executive

NH Research - 9200 Series Battery Emulator - Modular, Regenerative Battery Pack Emulator with Power Range from 12kW up to 21 Channels
  • High configuration flexibility
  • Bi-directional DC Source, expandable from 12 to 252kW with 40, 120 or 600V
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Low Output Capacitance for Accurate Battery Simulation
  • Current, Voltage & Mode Transitions <1 mSec
  • Built-in digital measurements with charting & scope displays
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive

NH Research - 9410 Series Regenerative Grid Simulator - Grid Simulator (4 Quadrant AC source) for Grid-Tied Inverter Testing, Vehicle to Grid (V2G) Testing, AC Power Product Testing, & More!
  • Wide Operating Envelope at 100kW per cabinet
  • Bidirectional DC Source, scalable to 2.4MW/8000A
  • Regenerative, greater than 90% efficiency of discharge power returned to AC mains
  • Built-in digital measurements with charting & scope displays
  • Current, Voltage & Mode transitions in <2 mSec
  • Battery Emulation Mode
  • Touch Panel, LabVIEW® & IVI Drivers
  • Enerchron® Test Executive