Pickering - PXI Millivolt Thermocouple Simulator Module - 32 Channel

Pickering - PXI Millivolt Thermocouple Simulator Module - 32 Channel
  • 32, 24, 16 or 8 Channel Low-Voltage Source
  • Ideal For Thermocouple Simulation
  • +/-100mV, +/-50mV and +/-20mV Output Ranges
  • 0.7μV Voltage Resolution (+/-20mV Range)
  • Two-Wire Output for Each Channel
  • Remote Sense for Breaking Ground Loop Effects
  • Open Circuit Simulation
  • Supported in PXI or LXI Chassis
  • Kernel and VISA Drivers
  • 3-Year Warranty

More

This series of PXI Thermocouple Simulator Modules is available in a choice of 32, 24, 16 or 8 channels—each channel providing a low-voltage output across two connector pins capable of providing ±20mV with 0.7µV resolution, ±50mV with 1.7µV resolution and ±100mV with 3.3µV resolution, covering most thermocouple types.

These thermocouple simulators use two wire outputs with a remote output reference sense to ensure the modules deliver accurate low-level voltages, even if the system has common mode voltages present. In addition, each simulation channel is also able to provide an open circuit setting to simulate faulty wiring connections to a sensor.

For improved accuracy each channel of the Low-Voltage Source carries accurate calibration data stored on the module. The module also includes a calibration multiplexer for module test and verification purposes.

More Product Information

VTI Instruments - EX1401 16-Channel Isolated Thermocouple and Voltage Measurement Instrument
  •  Typical accuracies of ±0.20°C
  • 16-channel isolated universalt hermocouple/voltage inputs
  • Power over Ethernet+ (PoE+)
  • 20K samples/second/channel sample rate
  • 24-bit ADC per channel
  • 500 V channel-ground isolation
  • 1000 V channel-channel isolation
  • Data logger acquisition mode
  • Built-in parallel data streaming
  • Full-featured embedded web interface
  • LXI Ethernet interface
  • 8-bit bank isolated digital I/O
  • Compact 1U half-rack form factor

Pickering - PXI Chassis
When you need high performance and configurability - choose Pickering's PXI Chassis.
We can supply a PXI chassis to meet every PXI application, they range from 8 to 19 3U slots. Selected PXI chassis are available with optional low acoustic operation; suitable for office, laboratory or other environments where low audible noise is essential. These PXI chassis can be optimized to accept multi-slot modules, such as our BRIC™ matrix modules, while only occupying one electrical slot.

Pickering - RF & Microwave PXI Switch Modules
We offer wide range of RF & Microwave PXI switch modules that can be used to increase the flexibility of Test & Measurement systems with signal bandwidths up to 65GHz. Take a look at the available PXI switch module configurations below.
 
Download these RF & Microwave resources:
You can learn more about our full range of RF & microwave switch modules here. We also offer mating cables and connectors to ensure speedy and successful system integration. Find more information on PXI related topics on our Support Knowledgebase. You can also download one of our many PXI switching resources here or feel free to contact us.

Pickering - PXI Matrix Switch Modules
From low density to high power - we have the PXI matrix switch modules you need
PXI matrix switch modules deliver low, medium and high-density switching of multiple channels in a single instance. They are organized in rows and columns to provide maximum flexibility, allowing you to connect any row to any column, making them ideal for routing multiple signals between your device under test and your instruments.

Pickering - BRIC™ - Large PXI Matrix Modules
High-Density Packaging and Integrated Backplanes for Automated Test Systems
  • Highest crosspoint density
  • Up to 1Amp and 2Amp scalable matrices
  • Integrated PXI matrix modules with built-In analog bus
  • Available as 2, 4 8 and 12-Slot 3U PXI modules
  • High bandwidth - up to 35MHz
  • Wide range of fully configured Y bus architectures
 

Pickering - General Purpose PXI Relay Switch Modules
Offering a wide range of general purpose PXI relay switch modules for automated test systems
Our general purpose PXI relay switch modules offer reliable switching in a variety of configurations. They consist of multiple independent relays single-pole single-throw (SPST), single-pole double throw (SPDT), double-pole single-throw (DPST) and double-pole double-throw (DPDT) relays. Our PXI relay switch module come in a variety of relay types including reed relays, electromechanical relays (EMR) and solid state relays—offering you the kind of relays that you need for your application.

Abaco - ICS-1572A 2-Channel, 250 MHz 16-bit ADC, 2-Channel 500 MHz 16-bit DAC XMC Module
  • 2 Transformer-coupled Analog Inputs, 16 bits, Fs ≤250 MHz per channel
  • 2 Transformer-coupled Analog Outputs, 16 bits, Fs ≤500 MHz per channel
  • Xilinx Virtex-6 LX240T User Programmable FPGA standard, other devices available as an option
  • PCI-e x8 Master/Target Burst Mode DMA capable
  • VxWorks, Linux and Microsoft® Windows® software drivers

AMETEK - Spacecraft Power Bus Simulator
Bus simulator includes BPMU and SPU
  • Provides enhanced measurement and data-logging of up to 40 channels.
  • Bus Power Monitoring Unit (BPMU) can be easily relocated to TVAC chamber to ease cabling complications
  • Data can be viewed either in spreadsheet or graphical format
  • Spacecraft (Payload) Protection Unit (SPU) provides 10 μsec reaction to out-of-tolerance conditions
  • Provices power stimulus to payload subsystem from three independent power sources

Elgar - Battery String Simulator (BSS)
  • Available in single and dual pack versions
  • Sensor simulation available to provide thermistor, strain gauges, heater loads, and cell bypass/short.
  • Battery behavior easily modified via spreadsheet download to simulate any battery topology including Nickel Metal Hydride, Lithium Ion, and Nickel Cadmium
  • Flexible Database Operation
  • Fully Programmable
  • Completely Configurable
  • Attention To Spacecraft Safety
  • Eliminates the need for test flight batteries and their associated issues

Pickering Interfaces

Pickering Interfaces designs and manufactures modular signal switching and instrumentation for use in electronic test and simulation. We offer the largest range of switching cards in the industry for PXI, LXI, and PCI applications as well as a full range of supporting cables and connectors. Our products are specified in test systems installed throughout the world and have a reputation for providing excellent reliability and value.

Nobody Does Switching Better than Pickering

We are continually expanding our range of switching products – because when it comes to test, our customers care about breadth of choice. In order for test engineers to balance their budget with the specified testing requirements, they need choices – in other words, just enough switching for their application. Our philosophy has always been to offer the right amount of switching, with the required performance, at the right cost no matter what the application may be. 

All module and cabling manufacturing processes are done within our two factories on flexible manufacturing lines allowing us to offer simple customization to meet our customers' needs. No matter what the test platform, we can provide a cost-effective solution for your switching requirements. We are also the only switch provider with in-house reed relay manufacturing capability.

Pickering offers the largest range of switching products available in PXI format

Because we consistently invest heavily in R&D, we now offer well over 1,000 PXI modules, more than all of our PXI market segment competitors combined. Our PXI modules range from our BRIC high-density switching matricesRF & microwave, and optical switching products through to standard and precision programmable resistor switching networks for sensor emulation.

Contact Details

US Regional Office

Pickering Interfaces Inc.

221 Chelmsford Street,

Suite 6

Chelmsford, MA 01824

Phone: +1 781-897-1710

Fax: +1 541-471-8828

Contact form or Email: ussales@pickeringtest.com

Learn about Pickering Interfaces Switch Path Manager - Signal Routing Software Strain Gauge Simulator Demo using LabView

 
 


Line Cards: 

No Product Types Available. Please check back later.