PowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 Version

PowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 VersionPowerGridm - 3U/4U/5U Back Plane Module - 48 VDC Input - PG1500 Version
  • Single 100-264VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
  • Multi-BackPlane Synchronization Port for BackPlane stacking.
  • Critical Equipment VAC Connections for Connection of Equipment.
  • Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
  • Consolidated SNMP Port for Network Monitoring of Stacked Units.
  • Consolidated Lightning Protection and Safety Ground.
  • 3 to 5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
  • Extended Air Intake and Exhaust Plenums for Attached Units.

More

The PG-BPM x(3/4/5)-48 is a PowergridM BackPlane Module That Hosts the Plug-And-Play Integration of Selected PowergridM UPS, Battery Expansion (BXM), AC to DC Power Solutions and VDC UPS Modules Into an Integrated Stack Configuration.

The BPM(X)-48 is designed for the PG1500 systems and can be ordered in various slot sizes from 3U to 5U Rackmount slots. The unit weighs 15 pounds (5 Slot version) and is 8.75” in height, 3.15” in depth, and 14.63” in width for a standard Rackmount solution. The BPM mounting brackets are designed to mount to rear of a standard 19” rack enclosure while maintaining the rear mounting whole locations for the mounting of the PowergridM.

MIL STD 461 UPS | MIL STD 810 UPS
EMI / EMC – PowergridM UPS system has been designed to comply with all the radiated emissions, susceptibility and conductive emissions requirements of the applicable sections of MIL STD 461F. The following is a list of methods used for controlling emissions: RE102 | CE102 | CS101 | CS114 | CS115 | CS116 | RS103
Environmental MIL-STD-810G: Humidity, Altitude, Sand and Dust, Shock and Vibration, Temperature.

More Product Information

PowerGridm - 3U/4U/5U Back Plane Module - 24 VDC Input - PG800 Version
  • Single 100-264 VAC Input Power for the integrated Stack. (Optional Voltages and Phase configurations available).
  • A 22-30 VDC Input Power Connection for the integrated Stack.
  • Critical Equipment VAC Connections for Connection of Equipment.
  • Optional Non-Critical Equipment VAC Connections (Power Shedding) with No Extended Battery Support.
  • Consolidated SNMP Port for Network Monitoring of Stacked Units.
  • Consolidated Lightning Protection and Safety Ground.
  • 3.5 VDC primary power loss alarm port for connection of a remote audio or visual indicator.
  • Extended Air Intake and Exhaust Plenums for Attached Units.

Powergridm - PG1500 – Spare Battery Module 48 VDC – Mobile Shelter Uninterruptible Power Supply
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights less than 8 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.

PowerGridm - PG1500 DC UPS Units – Custom UPS
  • AC Input Voltage: 100 – 264 VAC, 47 – 63, 400 Hz. (Single, Dual, and Three Phase options available).
  • Battery Backup: 12 minutes at 25C, 80% Load.
  • Available Output Voltages: 12/24/28/48 VDC options available.
  • Output Frequency: 50Hz or 60Hz.
  • Harmonic Distortion: <2% with resistive load.
  • Output Power: 1200 Watts / 1500 VA (Volt Amps).
  • Efficiency: 80%.
  • Startup Time: <30 Seconds.
  • Status Monitoring & Reporting: SNMP BPM based.

PowerGridm - BXM DC Input Cable - PCB 25F
  • PowergridM UPS VDC Input connection to VDC power source
  • PowergridM BackPlane VDC Input connection to VDC power source
  • PG-BXM VDC Input connection to VDC power source

PowerGridm - 25Ft. Input Power Cable
  • PowergridM UPS VAC Power Input connection to VAC power source
  • PG-BXM VAC Power Input connection to VAC power source

PowerGridm - Battery Expansion Module 24 VDC / 28 VDC
  • Connects to any PowergridM 800 UPS via VDC Input Connector.
  • Replicates the UPS VDC Input Power Connector for DC power source.
  • Hosts 2 removable Cold PakTM battery trays each containing 3    PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM 800 UPS.
  • Each BXM provides a minimum of 27+ minutes of extended power.
  • MIL-STD 1275 compliant for VDC charging of batteries.

PowerGridm - PG1000 – Spare Battery Module 48 VDC
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights less than 5 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.

Powergridm - VAC to VDC Power Supply – BackPlane Module BPM Custom UPS
  • BPM Ready 1U AC to DC power supply system.
  • Provide 1000, 2000, or 4000 Watts
  • 12V, 24V, 28V, or 48VDC output options.
  • In-System redundant configurations available.
  • Over voltage, over current and over temperature.
  • Short circuit protection.

Powergridm - PG BXM – Spare Battery Module 48 VDC – UAV Flight control UPS
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10 degrees temperature rise over ambient on full discharge.
  • Weights less than 16 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at a minimum of 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.
  • Can be used in either the PG-BXM48 or the PG-BXM-BPM48 units.