Powergridm - 800 Watts UPS – BackPlane Module BPM DC Output – Military UPS – Military Power Conditioner

Powergridm - 800 Watts UPS – BackPlane Module BPM DC Output – Military UPS – Military Power Conditioner
  • Ruggedized 1U 800 Watts UPS weighing less than 26 Lbs.
  • DC Output can be configured for 12VDC, 24VDC, 28VDC, or 48VDC.
  • Stack & Interconnect Design for 800/1600/2400/3200/4000 Watts.
  • Dual Hot Swap Battery Modules @ 3 Lbs Each – 9+ Min Hold Time.
  • AC/DC Input Power BackPlane Connections with Auto Sensing/Switching.
  • Dual Computer Controlled Inverter N+1 Design.
  • Over Voltage Capacity for Managed In-Rush and Startup Demands.
  • Over Voltage and Over Temperature Protection Circuits.
  • SNMP Based Network Connectivity for Monitoring & Status Reporting hosted within the BPM.
  • Audible Power Loss Alarm.
  • Lightning Protection & Safety Ground Connection via the BPM.
More

The PowergridM 800 UPS BPM Is a Rugged 800 Watts Full Double Conversion Rackmount Uninterruptible Power Supply in a 1U (1.73” High) Rugged Chassis That is 21.75” in Length Weighing Less Than 26 Pounds Designed to Interconnect to the PowergridM BackPlane Module (BPM). Military UPS – Military Power Conditioner

The PowergridM technology is implemented with a Load Balancing Interconnect (LBI) design that allows up to five (5) of the PowergridM 800-BPM units to be integrated into the PowergridM BPM to create an 800, 1600, 2400, 3200, or 4000 Watts Uninterruptible Power Solution. The LBI interconnects the inverter and power circuits in each unit via the BPM integrated Load Balancing Interconnect (LBI) data bus allowing them to work together to provide a fully meshed, load balanced and uninterruptible Powergrid for the attached systems. Each attached UPS will provide its share of the demanded power while ensuring frequency and power synchronization with its attached neighbors.

MIL STD 461 UPS | MIL STD 810 UPS
EMI / EMC – PowergridM UPS system has been designed to comply with all the radiated emissions, susceptibility and conductive emissions requirements of the applicable sections of MIL STD 461F. The following is a list of methods used for controlling emissions: RE102 | CE102 | CS101 | CS114 | CS115 | CS116 | RS103
Environmental MIL-STD-810G: Humidity, Altitude, Sand and Dust, Shock and Vibration, Temperature.


More Product Information

PowerGridm - Battery Expansion Module – BackPlane 48 VDC Output – Military Battery Backup System UPS
  • Plugs into any available slot in the BPM BackPlane.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 24+ minutes of hold time.

PowerGridm - Battery Expansion Module – BackPlane 24 VDC / 28 VDC Output – Military Battery Backup System
  • Connects to any available slot in the BPM.
  • Hosts 2 removable Cold PakTM battery trays each containing 3 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis package as the PowergridM UPS.
  • Each BXM provides a minimum of 27+ minutes of extended power.
  • MIL-STD 1275 compliant for VDC charging of batteries.

PowerGridm - Remote Power Interconnect Module Standard – Military Power Conditioner
  • Push/Pull Master Breaker for Power Disconnect for All Connections.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.
  • 8 User Equipment Connections With Selectable Connector Types.
  • 1 Primary Power Connection for PowerGridM UPS Connect.

PowerGridm - Remote Power Interconnect Module LBI – Military Power Conditioner
  • Supports the connection of up to 4 PowergridM UPS systems.
  • Provides a Daisy Chain Port for the Connection of a PG-RPIM-STD for Additional Equipment Connections.
  • Push/Pull Master Breaker for Power Disconnect for All Connections.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.

PowerGridm - AC Power Distribution Unit – Military Power Conditioner
  • Allows for Consolidation of VAC Input Power from the Source to a Stack.
  • Consolidates cable runs when extending the RPIM to a remote location.
  • Individual Push/Pull Based Breakers for Each Equipment Connection.
  • Remove and Rotate Mounting Brackets for Maximum Flexibility.

PowerGridm - Battery Expansion Module 48 VDC Output – Military Battery Backup System UPS
  • Connects to any 1500/3000 UPS via VDC Input Connector.
  • Replicates the UPS VDC Input Power Connector for DC power source.
  • Hosts 1 removable Cold Pack Battery tray each containing 8 PowergridM battery modules.
  • Provides LED Operational Status Indicators for each battery tray.
  • Same physical 1U size chassis as the PowergridM 1500 VA UPS.
  • Each BXM provides a minimum of 30+ minutes (Model Dependent).

Powergridm - VAC to VDC Power Supply – BackPlane Module BPM Custom UPS
  • BPM Ready 1U AC to DC power supply system.
  • Provide 1000, 2000, or 4000 Watts
  • 12V, 24V, 28V, or 48VDC output options.
  • In-System redundant configurations available.
  • Over voltage, over current and over temperature.
  • Short circuit protection.

Powergridm - PG3000 – Spare Battery Module 48 VDC – Military Battery Backup System
  • Hot Swap Lithium Iron Phosphate (LIP) Cold PakTM design.
  • Exhibits less than 10° rise over ambient on full discharge.
  • Weights 15 Lbs.
  • Embedded Power Management and Charging Circuitry.
  • Conservatively rated at 2500 full Charge/Discharge cycles.
  • Rated at 5 to 10 years shelf line for stored modules.

AMETEK - Avionics ATE Power Subsystem - Power Subsystem for Transportable Military Test Stand
Power Subsystem for Transportable Military test stand
  • Provides eight channels of programmable DC power with output isolation function
  • Output disconnect function
  • Total control via Ethernet within power supply.
  • Mounted in custom in transportable shock-mount case.