Reflex Photonics - Optical fiber cables
-
All fibers are Corning, laser-optimized multimode fibers, type OM3 50/125
-
Capable of over 300 m transmission at speeds up to 10 Gbps per fiber
-
Max attenuation ≤ 2.3 dB/km (for 850 nm)
-
Core diameter 50.0 ± 2.5 μm
-
Cladding diameter 125.0 ± 1.0 μm
-
Operation range temp 0 °C to 70 °C
More Product Information
-
VITA 57.1 and VITA 57.4 compatible versions.
-
Standard FMC interface.
-
Reduced design time.
-
Integrated optical transmitter and receivers.
-
LightVISION VM is offered as a 2, 4, 6, 8, 10, 12-lane transmitter, 2, 4, 6, 8, 10, 12-lane receiver or a 4+4-lane transceiver.
All modules operate at up to 12.5 Gbps per lane at ultra-low bit error rates of 10-12, with a sensitivity of –9 dBm -
Bandwidth from 25G (2 TX or 2 RX lane) to 150G (12 TX or 12 RX lane)
-
Multimode 850 nm wavelength laser
-
Over 100 m reach on OM3 ribbon fiber
-
Standard MPO parallel fiber connector
-
Equalizer, pre-emphasis, adjustable output
-
Monitoring: LOS, RSSI, temperature etc.
-
Integrated microcontroller
-
Available in commercial grade temperature range (0 ºC to 85 ºC)
-
Small: Less than 5 mm high.
-
Rugged: withstand radiation doses >100 krad (Si) and qualified per MIL-STD 883 shock and vibration.
-
Expected life: up to 20 years.
-
Cold start temperature: –55 ºC.
-
Performance: up to 12.5 Gbps/lane from –40 ºC to 100 ºC
-
Sensitivity: –9 dBm for BER 10–12
-
Low power consumption: 85 mW/lane (<10 pJ per bit))
-
4 TRX (4+4)-lane per device (50G, full duplex)
-
12 TX or 12 RX lane per device (150G)
-
Multimode 850 nm wavelength laser
-
Standard MT parallel fiber connector
-
Surface mountable or pluggable
-
RoHS or tin-lead
-
Monitoring: LOS, RSSI, temperature, etc
-
Small: Less than 6 mm high (module and interposer)
-
Rugged: withstand radiation doses >100 krad (Si) and qualified per MIL-STD 883 shock and vibration.
-
Expected life: up to 20 years.
-
Cold start temperature: –55 ºC.
-
Performance: up to 12.5 Gbps/lane from –40 ºC to 100 ºC
-
Sensitivity: –9 dBm for BER 10–12
-
Low power consumption: 85 mW/lane (<10 pJ per bit)
-
4 TRX (4+4)-lane per device (50G, full duplex)
-
12 TX or 12 RX lane per device (150G)
-
Multimode 850 nm wavelength laser
-
Over 100 m reach on OM3 ribbon fiber
-
Standard MT parallel fiber connector
-
LGA connector
-
RoHS
-
Equalizer, pre-emphasis, adjustable output
-
Monitoring: LOS, RSSI, temperature, etc.
-
Small: less than 6 mm high (module and interposer)
-
Rugged: withstand radiation doses >100 krad (Si) and qualified per MIL-STD 883 shock and vibration.
-
Expected life: up to 20 years.
-
Cold start temperature: –55 ºC.
-
Performance: up to 28 Gbps/lane from –40 ºC to 85 ºC
-
Sensitivity: –9 dBm for BER 10–9
-
Low power consumption: 120 mW/lane (<10 pJ per bit)
-
4 TRX (4+4)-lane per device (100G, full duplex)
-
12TX 12-channel transmitter (300G)
-
12RX 12-channel receiver (300G)
-
Multimode 850 nm wavelength laser
-
Over 100 m reach on OM3 ribbon fiber
-
Standard MT parallel fiber connector
-
RoHS
-
Monitoring: LOS, RSSI, temperature, etc.
-
Pull force: 1 kg (twice the Telecordia GR-468 requirements)
-
Lightweight, low profile, and simple assembly
-
12 independent parallel optical lane
-
Data rate : 10.3125 Gbps, 6.25 Gbps or 3.125 Gbps per lane
-
Commercial operating temperature (0 °C to 70 °C)
-
100 mW/lane typical power consumption
-
Card edge mountable
-
Standard MPO/MTP interconnect
-
Single 3.3 V power supply
-
OM3 and OM4 multimode fibers supported
-
Data protocol agnostic
-
Optical interconnect: Mechanical Transfer (MT) ferrule with linear array of 12 or 24 parallel multimode fibers
-
Secure connection: Spring within the backplane optical cable provides the mating force between plug-in module and backplane MTs.
-
Standards: Designed following VITA 66.5 standard (forthcoming).
-
Maintenance: Supports two-level maintenance.
-
Blind mate: Eliminates fiber handling and frees up space on host board.
-
Robustness: Tested for vibration and shock over industrial temperature range, exposure to humidity, salt fog, sand and dust, mate/un-mate cycles, following military specs.
-
12 TX or 12 RX lanes per device (120G)
-
Multimode 850 nm wavelength laser
-
Over 100 m reach on OM3 ribbon fiber
-
Standard MT parallel fiber connector
-
Surface mountable or pluggable
-
RoHS or tin-lead
-
Self-contained
-
Monitoring: LOS, RSSI, temperature etc.
-
Integrated microcontroller option
-
Commercial temperature range (0 ºC to 70 ºC)
