Teledyne LeCroy - Differential Probes (<= 1.5 GHz)
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
More Product Information
-
Highest resolution - HD4096 Technology, 12 bits all the time
-
Bigger Display, smaller footprint, most bench space
-
More capability, increased productivity
-
Available in 5MHz, 10MHz, 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models
-
1 channel (5 & 10MHz) or 2 channel (30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz & 500MHz) options available
-
Max Sampling rate of 125 Msa/s (5MHz & 10MHz), 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models
-
Up to 16-bit vertical resolution (14-bit on 5MHz, 10MHz, 30MHz & 60MHz models)
-
3.5" (5MHz & 10MHz) and 4.3" Touchscreen (30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz & 500MHz) available
-
Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)
-
4 GHz Bandwidth
-
±30V Offset Capability
-
±800mV Dynamic Range
-
50 kΩ DC Input Impedance
-
1.2x Attenuation
-
(Low Additive Noise, ~5%)
-
MCX terminated cable with wide
-
variety of connections:
-
Solder-in (4 GHz)
-
Coaxial Cable to
-
U.FL receptacle (3 GHz)
-
MCX PCB Mount (4 GHz)
-
Browser (350 MHz)
-
-
ProBus Interface
-
8 frequency counter channels, 16 isolated digital I/O channels, 2 isolated DAC channels in a single card
-
Single frequency measurement range that works from 0.05 Hz to 1 MHz
-
Very stable TCXO base clock, 50 MHz ±1 ppm
-
195 kΩ Input impedance with selectable coupling (AC/DC)
-
Wide differential input voltage range (±48 V) with up to 250 V working common mode voltage
-
Programmable threshold and hysteresis levels with 1 mV resolution
-
Support for quadrature encoder
-
Isolated DIO channels with up to 60 V compliance
-
Isolated and independent 16-bit DAC channels, configurable for voltage or current output
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Up to 65 GHz system bandwidth
-
Up to 130 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
Up to 30 GHz bandwidth and 80 GS/s sample rate
-
The most advanced oscilloscope user interface
-
The industry’s only true hardware 14.1 Gb/s serial trigger
-
Low Jitter Measurement Floor and exceptional timebase stability
-
Comprehensive set of serial data analysis, debug, validation and compliance tools
-
Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
-
Integrated standard and custom measurements and math functions for unrivaled analysis capability
-
Multi-lane serial data eye, jitter and crosstalk analysis
-
Real-time de-embedding, emulation, and equalization
-
Combination of DC and RF in a single probe module: One dual probe or a maximum of three RF; a maximum of 9 DC standard (other quantities upon request).
-
Utilizes ACP tip design, GSG, GS or SG
-
RF tips available from DC to 110 GHz
-
Choice of BeCu or tungsten tips
-
DC power needles come standard with 100 pF microwave capacitor
-
Power bypass inductance: 8 nH
-
Maximum DC voltage: 50 V without power bypassing (25 V with standard power bypassing, and component dependent with custom power bypassing)
-
Ideal for probing the entire circuit for functional test
-
Dual ACP configuration supports differential signaling applications
-
DC probes can provide power or slow logic to circuit under test
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)