-
The SL162 is characterized as a High Intensity Spot/Coaxial Light and is designed primarily to replace fiber optic light sources in coaxial lensing applications.
-
Optional couplers are available for use with Dolan-Jenner, Fostec, and Moritex fiber bundles.
-
The spot light is designed with sufficient thermal management to provide 33kLux at a working distance of 4” (100mm).
-
A very wide range of wavelengths from UV to IR are available.
Teledyne LeCroy - High Voltage Differential Probes
The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.
Device Under Test | Recommended Model | Safety Class | Bandwidth | Cable Length | Tip Accessories Included |
120 V/240 V Half-Bridge Circuit Topologies | HVD3102A | 1 kV | 25 MHz | 2 m | Yes |
HVD3102A-NOACC | 1 kV | 25 MHz | 2 m | No | |
HVD3106A | 1 kV | 120 MHz | 2 m | Yes | |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
380 V - 600 V Class Electrical Apparatus | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3106A-NOACC | 1 kV | 120 MHz | 2 m | No | |
HVD3106A-6M | 1 kV | 80 MHz | 6 m | Yes | |
Solar PV Inverter | HVD3106A | 1 kV | 120 MHz | 2 m | Yes |
HVD3206A | 1.5 kV | 120 MHz | 2 m | Yes | |
HVD3206A-6M | 1.5 kV | 80 MHz | 6 m | Yes | |
5 kV Electrical Apparatus | HVD3605A | 6 kV | 100 MHz | 6 m | Yes |
More Product Information
Fits into all standard in-wall junction boxes, easy and invisible mounting, safe against vandalism, many applications: Sanitary installations, security equipment, lighting, etc. Compact design Cost reductions by long lifetime and high efficiency
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
-
6000VA, 4500W, 85-265VAC, 50/60Hz Input and 220 or 230VAC, 60Hz Output, Freq Changer, 3U25.6, Hubbell IEC 60309 460P12W on 3ft Cord, L6-30R on 3ft Cord, Double conversion, Rugged, High Temperature, Isolated, On-line UPS, Power Factor Correction, External EBM
-
Ultra-compact design
-
Affordable
-
Power over Ethernet
-
High frame rate
-
Monochrome (G-032B) and color (G-032C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filterr
-
Up to 65 GHz system bandwidth
-
Up to 130 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
Low output capacitance
-
High bandwidth up to 30kHz
-
High resolution I-V curve simulates static and dynamic conditions
-
Designed for high speed Maximum Power Point Tracking (MPPT)
-
Can be integrated into a multi-channel system for higher power testing
-
Low voltage, high bandwidth version for DC Power Optimizers
-
EN50530 support
-
HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
-
Up to 5 Gpts of acquisition memory enables detailed viewing of long events
-
15.6" 1900 x 1080 Full HD capacitive touchscreen
-
New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Deep toolbox enables and simplifies complex analysis
-
Intuitive navigation to quickly find important features in long waveforms
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)