Teledyne LeCroy - HVP120 400 MHz High Voltage Passive Probe
-
400 MHz probe bandwidth
-
900 ps rise time
-
1000 Vrms maximum input
-
Up to 6 kV transient overvoltage
The HVP120 is a high voltage passive probe designed for probing up to 1,000 Vrms and capable of handling up to 6,000 V peak transients. Its fast rise time and excellent frequency response make it suitable for a wide variety of high voltage measurement applications. The HVP120 features a spring loaded probe tip and a variety of standard accessories to make probing high voltages safe and easy.
Electrical Characteristics |
|
Bandwidth | 400 MHz |
Risetime (10% - 90%) | 900 ps (typical) |
Maximum Input Voltage (As defined in IEC 61010-031) | |
Measurement Category II | 1000 Vrms |
Measurement Category I | 4000V Transient Overvoltage at 1000 Vrms, 6000V Transient Overvoltage at 0 Vrms |
Pollution Degree (As defined in IEC 61010-031) | 2 |
Input Capacitance | 7.5 pF (typical) |
Compensation Range | 10 pF - 50 pF (typical) |
Attenuation Ratio | 100:1 ± 2% |
Environmental and Safety |
|
Temperature (Operating) | 0°C to 50°C |
Temperature (Non-Operating) | -40°C to 71°C |
Humidity (Operating) | 80% RH (Non-Condensing) up to 31°C, decreasing linearly to 40% RH at 50°C |
Altitude (Operating) | up to 2,000 m |
Altitude (Non-Operating) | up to 15,000 m |
General Characteristics |
|
Weight (probe) | 67 g (0.15 lbs) |
Cable Length | 2 m (6.56 ft) |
Probe Tip Diameter | 5 mm (0.20 inches) |
More Product Information
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
-
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
-
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
-
Total Amplitude Accuracy < 1.2 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
All-Digital IF Technology
-
Standard Preamplifier
-
Distance to fault capability using VNA time domain analysis
-
Up to 1.5 GHz Tracking Generator Kit
-
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
-
EMI Pre-compliance Test Kit (Opt.)
-
10.1 lnch WVGA (1024 x 600) Display
-
100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
-
Up to 4 GS/s sample rate
-
Long Memory – up to 20 Mpts
-
10.1” capacitive touch screen display
-
16 Digital Channel MSO option
-
MAUI - Most Advanced User Interface
-
Designed for Touch
-
Built for Simplicity
-
Made to Solve
-
-
Advanced Anomaly Detection
-
Fast Waveform Update
-
History Mode - Waveform Playback
-
WaveScan - Search and Find
-
-
Multi-Instrument Capabilities
-
Protocol Analysis - Serial Trigger and Decode
-
Waveform Generation - Built-in Function Generator
-
Digital Voltmeter and Frequency Counter
-
-
Future Proof
-
Upgradeable Bandwidth
-
Field Upgradable Software and Hardware Options
-
-
6 kV CAT safety rated
-
Widest differential voltage range available
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
With the ProBus interface, the ZD500, 1000, and 1500 becomes an integral part of the oscilloscope. All probe gain and offset controls are transparent to the user, making it easier to probe the circuit without concern for which gain setting to choose. When used with a LeCroy digital oscilloscope, no external power supply is required.
-
Up to 65 GHz system bandwidth
-
Up to 130 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
S-parameters DC to 40 GHz, single-ended and mixed-mode
-
Impedance Profile with <1 mm resolution, differential and common-mode
-
Internal, automatic OSLT calibration
-
USB-connected, small, lightweight
-
Flexible display of the measurements
-
Remove effects from fixtures, connectors and cables
-
Emulate eye diagrams with CTLE, DFE and FFE equalization
-
Advanced jitter analysis
-
Static power analysis - like a dedicated power analyzer
-
Dynamic power analysis – capture more information
-
Complete test coverage – control system, power section, motor
-
Comprehensive mechanical interface
-
Harmonics calculation option
-
Vector display option (THREEPHASEVECTOR)
-
Waveform Transformations option (THREEPHASEdq0)
-
16 Channels with OscilloSYNC™
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)