Teledyne LeCroy - HVP120 400 MHz High Voltage Passive Probe
-
400 MHz probe bandwidth
-
900 ps rise time
-
1000 Vrms maximum input
-
Up to 6 kV transient overvoltage
The HVP120 is a high voltage passive probe designed for probing up to 1,000 Vrms and capable of handling up to 6,000 V peak transients. Its fast rise time and excellent frequency response make it suitable for a wide variety of high voltage measurement applications. The HVP120 features a spring loaded probe tip and a variety of standard accessories to make probing high voltages safe and easy.
Electrical Characteristics |
|
Bandwidth | 400 MHz |
Risetime (10% - 90%) | 900 ps (typical) |
Maximum Input Voltage (As defined in IEC 61010-031) | |
Measurement Category II | 1000 Vrms |
Measurement Category I | 4000V Transient Overvoltage at 1000 Vrms, 6000V Transient Overvoltage at 0 Vrms |
Pollution Degree (As defined in IEC 61010-031) | 2 |
Input Capacitance | 7.5 pF (typical) |
Compensation Range | 10 pF - 50 pF (typical) |
Attenuation Ratio | 100:1 ± 2% |
Environmental and Safety |
|
Temperature (Operating) | 0°C to 50°C |
Temperature (Non-Operating) | -40°C to 71°C |
Humidity (Operating) | 80% RH (Non-Condensing) up to 31°C, decreasing linearly to 40% RH at 50°C |
Altitude (Operating) | up to 2,000 m |
Altitude (Non-Operating) | up to 15,000 m |
General Characteristics |
|
Weight (probe) | 67 g (0.15 lbs) |
Cable Length | 2 m (6.56 ft) |
Probe Tip Diameter | 5 mm (0.20 inches) |
More Product Information
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
-
Available in 250 MHz and 350 MHz models.
-
2, 4 and 8 channel modes.
-
16-bit vertical resolution.
-
Max Sampling rate of 1.2 GS/s.
-
Max sinewave frequency of 250 MHz and 350 MHz respectively.
-
DigRF v4 Decodes
-
Low-speed (26 Mb/s)
-
Medium-speed (1248 Mb/s)
-
High-speed (1456 Mb/s)
-
-
DigRF v3 Decodes
-
Low-speed (6.5 Mb/s)
-
Medium-speed (26 Mb/s)
-
High-speed (312 Mb/s)
-
-
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
-
Correlate analog waveforms with protocol decode on one screen
-
View decoded data in hexadecimal format
-
Decode information expands as the time base is adjusted or zoomed
-
Convenient table display with quick “Zoom to byte” capability
-
Quick search capability for specific message packets
-
4 GHz or 6 GHz models
-
Up to 5 Vpk-pk dynamic range with low noise
-
±3 V offset range
-
Deluxe soft carrying case
-
Wide variety of tips and leads
-
Solder-In Lead
-
Positioner (Browser) Tip
-
Adjustable (Browser) Tip
-
Quick Connect Lead
-
HiTemp Solder-In Lead
-
-
Ideal for DDR2, DDR3, LPDDR2
-
Low loading and high imedance for minimal signal disturbance
-
6 kV CAT safety rated
-
Widest differential voltage range available
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)