Teledyne LeCroy - Optical Probes
These wide- band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. They connect to Teledyne LeCroy real-time oscilloscopes and provide capability for physical layer signal assessment using a variety of oscilloscope tools, such as SDAIII-CompleteLinQ Serial Data Eye, Jitter, Noise and Crosstalk Analysis, mask testing, serial triggering and decoding, and other compliance and debug tools. Maximum data rate test capability is >11.317 Gb/s with reference receiver, or 12.5 Gb/s without.
More Product Information
-
Revolutionary technology advancement for wafer and die-level photonics probing
-
Real-time in-situ calibrations
-
Highest accuracy in test results
-
Lowest coupling loss
-
New innovative combination of hardware and software features to align and optimize fibers/arrays in a wafer-level trench
-
Minimized coupling losses with minimal trench dimensions
-
Industry standard for vertical coupling to wafer-level grating couplers
-
Dark, shielded and frost-free
-
-40°C to +125°C
-
Pioneering set of automated functions that perform critical calibrations of the optical positioning system to the probe station
-
Exclusive FormFactor-developed automated test methodology
-
FormFactor-developed graphical user interface to manually control the optical positioning system
-
Configurable between single fibers, fiber arrays and edge coupling holders
-
Multi-channel (or single-channel) measurements of strain-multiplex: Over 300,000 measurement locations
-
Flexible, lightweight and easy to install sensors reduce time to first measurement
-
Passive, corrosion resistant, dielectric, flexible sensors go where other sensors can’t – in bends, around corners, embedded inside materials
-
Long sensor life – no drift or recalibration required, cycle counts >107
-
Large strain range and high resolution allow for mapping of complex strain fields and large strain gradients
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
High signal fidelity to 4 GHz bandwidth
-
Low circuit loading - High input impedance and low capacitance
-
4 GHz, 2.5 GHz, 1.5 GHz and 1 GHz models
-
1MΩ input resistance
-
0.6 pF (4 GHz)and 0.9 pF input capacitance
-
± 8 V input dynamic range, ± 12 V offset range
-
Wide variety of tips and grounds
-
Easy to use, integrated with oscilloscope
-
100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
-
Up to 4 GS/s sample rate
-
Long Memory – up to 20 Mpts
-
10.1” capacitive touch screen display
-
16 Digital Channel MSO option
-
MAUI - Most Advanced User Interface
-
Designed for Touch
-
Built for Simplicity
-
Made to Solve
-
-
Advanced Anomaly Detection
-
Fast Waveform Update
-
History Mode - Waveform Playback
-
WaveScan - Search and Find
-
-
Multi-Instrument Capabilities
-
Protocol Analysis - Serial Trigger and Decode
-
Waveform Generation - Built-in Function Generator
-
Digital Voltmeter and Frequency Counter
-
-
Future Proof
-
Upgradeable Bandwidth
-
Field Upgradable Software and Hardware Options
-
-
APS-H optical format CMOS sensor
-
PoCXP
-
4-DIN type connector
-
79.7 fps at full resolution
-
Monochrome (X-2620B) and color (X-2620C) models
-
Extended feature set with Sequencer Control and Multiple Region of Interest selection to support advanced imaging applications
-
On-board Defect Pixel and 2D Fixed Pattern Noise Correction for improved image quality
-
Simplified firmware update in the field via interface cables using GenICam File Access
-
Robust, fan-less design for industrial imaging applications
-
Heat-dissipation optimized housing to reduce image noise
-
Build-in tripod adapter and multiple mounting holes for eased system integration
-
DIN 1.0/2.3 CoaXPress connectors for secure operation in industrial environments
-
Single cable solution using Trigger and Power over CoaXPress
-
Comprehensive I/O functionality for extended control of connected system components
-
Select between B 270 ASG protection glass and filter types: IRC30 IR cut filter or Schneider 486 IR cut filter
-
Modular design with multiple reference paths built in for high-availability.
-
6 expansion slots for customization and expansion.
-
Industry-first GPS integrity checking with Timewall™
-
Unique optical crosslink architecture for either Master-Slave hierarchical setups or Master-Master crosschecking and failover
-
LCD display and keypad for basic status and configuration – secure web browser for detailed setup.
-
Full control from oscilloscope through ProBus interface
-
Dc to 100 MHz bandwidth
-
Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR)
-
Gain of x1 or x10
-
Industry-leading overdrive recovery
-
Low noise
-
Selectable BW limiting
-
Two gain control modes when connected to a Teledyne LeCroy oscilloscope
-
Built-in precision Voltage Generator (PVG)
-
Comparator and true differential offset modes
-
The T‑Gauge® Control Unit (TCU) is the central component of the T‑Gauge® family of products and serves as the source of the optical and electrical signals necessary to generate and detect terahertz. The TCU also transforms analog data into a digital signal that can be analyzed using the onboard processor and interacts with the wide variety of THz accessories.
-
The TCU is a 19 inch (483 mm) rack, wall, or table mountable instrument, consisting of an ultrafast laser, high-speed optical delay, ranging optical delay, power supplies, and signal conditioning electronics, with connectors for convenient interfacing to various optical and electronic components. The high-speed delay included in the TCU can be chosen from a number of delay length and speed options. When utilized in conjunction with T-Gauge® accessories, the TCU enables the user to generate and detect pulsed terahertz energy for a wide variety of measurements.
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)