Teledyne LeCroy - Optical Probes
These wide- band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. They connect to Teledyne LeCroy real-time oscilloscopes and provide capability for physical layer signal assessment using a variety of oscilloscope tools, such as SDAIII-CompleteLinQ Serial Data Eye, Jitter, Noise and Crosstalk Analysis, mask testing, serial triggering and decoding, and other compliance and debug tools. Maximum data rate test capability is >11.317 Gb/s with reference receiver, or 12.5 Gb/s without.
More Product Information
-
Up to 65 GHz system bandwidth
-
Up to 120 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
Up to 65 GHz system bandwidth
-
Up to 130 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
S-parameters DC to 40 GHz, single-ended and mixed-mode
-
Impedance Profile with <1 mm resolution, differential and common-mode
-
Internal, automatic OSLT calibration
-
USB-connected, small, lightweight
-
Flexible display of the measurements
-
Remove effects from fixtures, connectors and cables
-
Emulate eye diagrams with CTLE, DFE and FFE equalization
-
Advanced jitter analysis
-
Teledyne e2v Sapphire CMOS sensor
-
Switchable shutter modes
-
Power over Ethernet
-
60 fps at full resolution
-
Monochrome (G-192B) and color (G-192C) models
-
GigE Vision interface with Power over Ethernet
-
Screw mount RJ45 Ethernet connector for secure operation in industrial environments
-
Supports cable lengths up to 100 meters (CAT-6 recommended)
-
Comprehensive I/O functionality for simplified system integration
-
Popular C-Mount lens mount
-
Easy camera mounting via standard M3 threads on top and bottom of housing or optional tripod adapter
-
Easy software integration with Allied Vision's Vimba Suite and compatibility to the most popular third party image-processing libraries.
-
Defect pixel masking feature with the Defect Mask Loader tool that allows you to manage a user defined defective pixel list to match your application and optimize the life cycle of the camera.
-
Select between B 270 ASG protection glass and filter types: Jenofilt 217 IR cut filter, Hoya C-5000 IR cut filter, RG715 IR pass filter, or RG830 IR pass filter
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
Multi-channel (or single-channel) measurements of strain-multiplex: Over 300,000 measurement locations
-
Flexible, lightweight and easy to install sensors reduce time to first measurement
-
Passive, corrosion resistant, dielectric, flexible sensors go where other sensors can’t – in bends, around corners, embedded inside materials
-
Long sensor life – no drift or recalibration required, cycle counts >107
-
Large strain range and high resolution allow for mapping of complex strain fields and large strain gradients
-
Up to 100 GHz Industry leading analog bandwidth
-
Acquisition module configurations with up to:
-
4 channels at 36 GHz
-
2 channels at 65 GHz
-
1 channel at 100 GHz
-
-
Up to 240 GS/s sample rate
-
Long Memory - Up to 1.5 Gpt/ch
-
Modular Design - build a system with up to 20 acquisition modules, for:
-
80 channels at 36 GHz
-
40 channels at 65 GHz
-
20 channels at 100 GHz
-
-
ChannelSync™ Architecture for 130 fs matching between channels
-
Multi-Lane eye, Jitter and Noise Analysis with SDAIII-CompleteLinQ
-
Optical Modulation Analysis with Optical-LinQ
-
PAM4 Eye, Jitter and Noise Measurements with PAM4 Signal Analysis
-
Industry’s only true hardware 14.1 Gb/s serial trigger
-
Add 12.5 GS/s mixed-signal capability at any time with the HDA125 high-speed digital analyzer
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)