Teledyne LeCroy - PPE6KV 1000:1 400 MHz 50M Ohm High-Voltage Probe
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
Main Specifications |
|
Bandwidth | 400 MHz |
Attenuation | 1000:1 |
Probes |
|
Probe Ring | Yes |
Physical Dimensions |
|
Cable Length | 2m |
More Product Information
-
Up to 65 GHz system bandwidth
-
Up to 120 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
Full control from oscilloscope through ProBus interface
-
Dc to 100 MHz bandwidth
-
Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR)
-
Gain of x1 or x10
-
Industry-leading overdrive recovery
-
Low noise
-
Selectable BW limiting
-
Two gain control modes when connected to a Teledyne LeCroy oscilloscope
-
Built-in precision Voltage Generator (PVG)
-
Comparator and true differential offset modes
-
4 GHz Bandwidth
-
±30V Offset Capability
-
±800mV Dynamic Range
-
50 kΩ DC Input Impedance
-
1.2x Attenuation
-
(Low Additive Noise, ~5%)
-
MCX terminated cable with wide
-
variety of connections:
-
Solder-in (4 GHz)
-
Coaxial Cable to
-
U.FL receptacle (3 GHz)
-
MCX PCB Mount (4 GHz)
-
Browser (350 MHz)
-
-
ProBus Interface
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point
-
Up to 65 GHz system bandwidth
-
Up to 130 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
-
Up to 100 GHz Industry leading analog bandwidth
-
Acquisition module configurations with up to:
-
4 channels at 36 GHz
-
2 channels at 65 GHz
-
1 channel at 100 GHz
-
-
Up to 240 GS/s sample rate
-
Long Memory - Up to 1.5 Gpt/ch
-
Modular Design - build a system with up to 20 acquisition modules, for:
-
80 channels at 36 GHz
-
40 channels at 65 GHz
-
20 channels at 100 GHz
-
-
ChannelSync™ Architecture for 130 fs matching between channels
-
Multi-Lane eye, Jitter and Noise Analysis with SDAIII-CompleteLinQ
-
Optical Modulation Analysis with Optical-LinQ
-
PAM4 Eye, Jitter and Noise Measurements with PAM4 Signal Analysis
-
Industry’s only true hardware 14.1 Gb/s serial trigger
-
Add 12.5 GS/s mixed-signal capability at any time with the HDA125 high-speed digital analyzer
-
2 kV CAT safety rated
-
Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
6 meter cable
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
4 GHz or 6 GHz models
-
Up to 5 Vpk-pk dynamic range with low noise
-
±3 V offset range
-
Deluxe soft carrying case
-
Wide variety of tips and leads
-
Solder-In Lead
-
Positioner (Browser) Tip
-
Adjustable (Browser) Tip
-
Quick Connect Lead
-
HiTemp Solder-In Lead
-
-
Ideal for DDR2, DDR3, LPDDR2
-
Low loading and high imedance for minimal signal disturbance
-
Available in 250 MHz and 350 MHz models.
-
2, 4 and 8 channel modes.
-
16-bit vertical resolution.
-
Max Sampling rate of 1.2 GS/s.
-
Max sinewave frequency of 250 MHz and 350 MHz respectively.
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)