Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
-
Up to 5 Gpts of acquisition memory enables detailed viewing of long events
-
15.6" 1900 x 1080 Full HD capacitive touchscreen
-
New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Deep toolbox enables and simplifies complex analysis
-
Intuitive navigation to quickly find important features in long waveforms
-
5kHz–30MHz
-
1.5–300 V/m
-
User–selectable X, Y, Z Axes
-
High-quality construction with low-noise electrical performance
-
Kelvin version for convenient 4-point measurements
-
Replaceable coaxial probe tips, with choice of tip radii, and full electrical guard to the probe tip
-
SSMC 50 connectors
-
Ultra-low, fA and fF measurements from -65 º C to 150 º C
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
All fixed-attenuation, standard probes automatically re-scale any Teledyne LeCroy 9300C or LC series oscilloscope for the appropriate attenuation factor of the probe.
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Independently cooled cold shield
-
Probe positioners placed inside vacuum chamber
-
Intuitive, manual drives
-
Front loading capability through load door
-
Independent control of linear chuck stage and positioners
-
Contact/separation stroke for chuck
-
4 GHz Bandwidth
-
±30V Offset Capability
-
±800mV Dynamic Range
-
50 kΩ DC Input Impedance
-
1.2x Attenuation
-
(Low Additive Noise, ~5%)
-
MCX terminated cable with wide
-
variety of connections:
-
Solder-in (4 GHz)
-
Coaxial Cable to
-
U.FL receptacle (3 GHz)
-
MCX PCB Mount (4 GHz)
-
Browser (350 MHz)
-
-
ProBus Interface
-
Fully isolated experiment space for true 4K temperatures during probing
-
Cryogenic positioners to provide large travel ranges without warming up the device
-
Flexible thermal jumpers to ensure high thermal conductance and low mechanical transmission
-
A soft vacuum bellows provides a compliant mounting interface for the cryocooler
-
Quick release vacuum feedthroughs for easy configurability
-
A large rectangular port for high signal capacity
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)