Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-
-
Multi-purpose SIGMA instrument integration kit
-
Shorter cabling and universal chuck connection
-
Triax probe with protected guard
-
Triax design for low-leakage measurements up to 3 kV
-
Special chuck surface coating
-
High-isolation ready
-
Arcing protection
-
Shield Enclosure with interlock
-
Advanced grounding concept
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.
New technology which utilizes hybrid circuitry (and switch reading for probes with switchable gain/attenuation) minimizes ringing and overshoot to provide a precise response.
-
Highest resolution – 12 bits all the time
-
More capability – integrates multiple instruments into one
-
Comprehensive probe support – supports over 30 probes in 9 categories
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Calibrated for high absolute accuracy
-
Fast response time
-
Capable of measuring from -70 to +275 degrees C.
-
Rugged sensor packages, qualified to same rigorous standards applied to electronic gages
-
Double-ended design supports multiplexing of many sensors on one fiber
-
Included in ENLIGHT’s sensor templates – allows for quick and easy optical to mechanical conversions
-
Re-configurable for DC, RF, mmW, FA, WLR and more
-
Thermal range: -60˚C to 300˚C available
-
Upgrade path to meet your future needs
-
Stable and repeatable measurements over a wide thermal range
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Advanced EMI-shielding with PureLine with AttoGuard technologies
-
Best solution for low-noise and 1/f measurements
-
Minimize AC and spectral noise
-
Minimizes settling times for efficient measurements, without compromising accuracy over full thermal range
-
Locking roll-out stage
-
Innovative microscope remote control
-
Intuitive ergonomic stage controls
-
Quick, safe, and comfortable wafer access
-
Easy on-wafer navigation
-
Fast setup and test data gathering
-
Dedicated Velox version for manual probe stations
-
AugmentedAlign tool with on screen markers for improved RF measurement accuracy
-
Revolutionary technology advancement for wafer and die-level photonics probing
-
Real-time in-situ calibrations
-
Highest accuracy in test results
-
Lowest coupling loss
-
New innovative combination of hardware and software features to align and optimize fibers/arrays in a wafer-level trench
-
Minimized coupling losses with minimal trench dimensions
-
Industry standard for vertical coupling to wafer-level grating couplers
-
Dark, shielded and frost-free
-
-40°C to +125°C
-
Pioneering set of automated functions that perform critical calibrations of the optical positioning system to the probe station
-
Exclusive FormFactor-developed automated test methodology
-
FormFactor-developed graphical user interface to manually control the optical positioning system
-
Configurable between single fibers, fiber arrays and edge coupling holders
-
DigRF v4 Decodes
-
Low-speed (26 Mb/s)
-
Medium-speed (1248 Mb/s)
-
High-speed (1456 Mb/s)
-
-
DigRF v3 Decodes
-
Low-speed (6.5 Mb/s)
-
Medium-speed (26 Mb/s)
-
High-speed (312 Mb/s)
-
-
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
-
Correlate analog waveforms with protocol decode on one screen
-
View decoded data in hexadecimal format
-
Decode information expands as the time base is adjusted or zoomed
-
Convenient table display with quick “Zoom to byte” capability
-
Quick search capability for specific message packets
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)