Teledyne LeCroy - WavePro 7 Zi-A 1.5GHz-6GHz Oscilloscopes

Teledyne LeCroy - WavePro 7 Zi-A 1.5GHz-6GHz Oscilloscopes
  • Teledyne LeCroy’s unique summary view displays the Eye Pattern, TIE, Bathtub Curve and Jitter Histogram all on the screen at the same time
  • De-embed cables allow all of the SDA tools to be used as if the cables were not in the system
  • Create Eye Patterns utilizing the full memory for maximum statistical significance
  • Display Eye Patterns up to 100 times faster than other solutions
  • Trigger on 80-bit patterns at up to 3.125 Gb/s using the Serial Trigger
  • Decode 8b/10b data on up to 4 lanes simultaneously
  • Configure software PLL for any standard or custom requirement
  • Serial data compliance testing
    • 10/100/1000 BaseT ENET
    • USB 2.0
    • MIPI D-PHY
    • DDR2 / DDR3
    • PCI Express
    • DisplayPort
    • SAS
    • HDMI
    • UWB
    • SATA

More

Combining signal fidelity with an architecture that maximizes speed in every performance aspect, the new WavePro 7 Zi-A Series presents a totally new oscilloscope experience from 1.5 to 6 GHz bandwidths. Experience 50 Ω and 1 MΩ inputs for every channel and four inputs into high-speed front end amplifiers and analog to digital converters. Experience the new X-Stream II architecture that provides 10 to 20 times faster long memory performance than any other oscilloscope. Combined with Teledyne LeCroy’s flexible and deep analysis toolbox, the WavePro 7 Zi-A Series gives an unforgettable experience for the debugging, validation, analysis and compliance testing of electronic designs.

Freedom from Limitations

WavePro 7 Zi-A excels in the way it offers general purpose utility never before seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi-A oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4 and 6 GHz models include both ProBus and ProLink input types which means eight probes can be attached and then multiplexed from the front panel or by remote control. The result— it's easy to hook up a passive probe even on 4 or 6 GHz models—no more frustration and hassle of trying to find a 1 MΩ input adapter. Plus, any existing investment in Teledyne LeCroy probes, such as current probes, single-ended or differential active probes, or high voltage probes, is fully leveraged. Perfect.

More Triggers Isolate More Problems More Effectively

A powerful combination of high bandwidth Edge and 10 different SMART triggers allow you to isolate the problem quickly and begin to focus on the cause. Most SMART triggers allow triggering on pulse widths or features as small as 200 ps. A high-speed serial trigger enables triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length. Built-in hardware clock recovery is also included.

TriggerScan™

TriggerScan uses high-speed hardware triggering capability with persistence displays to capture only the signals of interest and provide answers up to 100X faster that other methods. Traditional fast display update modes work best on frequent events occurring on slow edge rates while TriggerScan excels in finding infrequent events on fast edge rates.

WaveScan™ Advanced Search and Analysis Finds Problems that Triggers Won't Find

The best trigger won't find all unusual events—a more powerful capability is sometimes needed. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search) or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition and begin scanning. When an event is found, WaveScan highlights the error on screen and displays a table listing the errors.

Fully Integrated Mixed Signal Oscilloscope (4+36) Option

Add Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed signal options. These convenient add-ons connect to the Teledyne LeCroy LBUS and quickly and simply provide capability to acquire up to 36 digital lines time-correlated with analog waveforms. No time is wasted in trying to learn how to connect, synchronize or operate a complicated logic analyzer since the MSOs are already completely integrated into the scope operation. In addition to acquiring digital lines, they are also helpful for monitoring low-speed signals, such as serial data clock, data, and chip select signals, thus preserving the analog channels for higher speed requirements.

Teledyne LeCroy — The Acquisition Memory Leader

Teledyne LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi Series' proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at 256 Mpts deep. What you experience is performance gains of 10–20X over what is available today. Whether looking at the acquired signal or while analyzing several screens of statistics, tracking a frequency or identifying complex patterns the WavePro 7 Zi is designed to perform.

Instantaneous Responsiveness

The first time you use the Zi oscilloscope you will experience responsiveness that you've never seen before. Acquiring and manipulating the longest record lengths and the most complex WaveShape Analysis are all easily handled at the same time. Whether you use the front panel or choose to make adjustments with a mouse or the touch screen, the system performs.

X-Stream II Architecture


Optimized for Fast Throughput

Designed for long memory operation and responsiveness X-Stream II technology enables high throughput of data—even when the oscilloscope is performing multiple 100 Mpts waveforms. It does so by eliminating the trade-offs between long memory length and quick processing. WavePro 7 Zi's proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor, high-speed serial data buses, a 64-bit OS and up to 8 GB of RAM.

Optimized for Long Memory

By using variable waveform segment lengths to improve the CPU cache memory efficiency the WavePro 7 Zi is designed for the fastest processing of long waveform records. The result—10-20 times faster processing compared to other oscilloscopes.

Optimized for Responsiveness

By dynamically allocating buffers where to maximize memory availability the WavePro 7 Zi Series embodies the fastest front panel responsiveness. Waveform previewing shows interim calculation results while a built in processing abort make front panel control changes instant by stopping the current process and allowing new waveforms to be positioned or zoomed—all without a lengthy recalculation.

Digital Filter Software Package (WPZi-DFP2)

DFP2 lets you implement Finite or Infinite Impulse Response filters to eliminate undesired spectral components, such as noise, and enhances your ability to examine important signal components. You can choose from a standared set of FIR or IIR filters. You can also design your own filters.

Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)

The spectrum converts the controls of your oscilloscope to those of a spectrum analyzer. Adjust the frequency span, resolution and center frequency. Apply filtering to your signal and watch the frequency signature change in real time. A unique peak search labels the spectral components and presents frequency and level in a table. Touch any line jump to that peak.

Mixed Signal Oscilloscope Option (MS-250/MS-500)

The Mixed Signal option allows the WavePro 7 Zi to convert to a mixed signal oscilloscope with up to 36 digital channels. Channels are sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs timesynchronized with four analog channels extends the oscilloscope's use to provide a total system view.

Jitter and Timing Analysis Package

Specialized timing parameters measure period, cycle-cycle, half period, width, etc. jitter on a variety of signals. Use the three views of jitter (statistical, time, and frequency) to understand root cause and to debug problems. Histograms provide understanding of statistical distributions. Tracks provide a means to show time-correlated peaks of jitter, and compare to other signals. FFTs provide the ability to debug root causes of high in-circuit jitter.

More Product Information

Teledyne LeCroy - WavePro HD 2.5 GHz - 8 GHz High Definition Oscilloscope
  • HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
  • Up to 5 Gpts of acquisition memory enables detailed viewing of long events
  • 15.6" 1900 x 1080 Full HD capacitive touchscreen
  • New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
  • MAUI with OneTouch user interface for intuitive and efficient operation
  • Deep toolbox enables and simplifies complex analysis
  • Intuitive navigation to quickly find important features in long waveforms

Teledyne LeCroy - WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes 4 GHz–30 GHz
  • Up to 30 GHz bandwidth and 80 GS/s sample rate
  • Most advanced oscilloscope user interface makes configuring complex measurements easy
  • The industry’s only true hardware 14.1 Gb/s serial pattern trigger
  • Add the Teledyne LeCroy HDA125 High-speed Digital Analyzer to create the most powerful, flexible mixed-signal test solution available
  • Low Jitter Measurement Floor and exceptional timebase stability
  • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Integrated 50 Ω and 1 MΩ inputs for true connection and probing flexibility
  • Integrated standard and custom measurements and math functions for unrivaled analysis capability
  • Multi-lane serial data eye, jitter and crosstalk analysis

Teledyne LeCroy - WaveSurfer 3000z 100 MHz - 1 GHz Oscilloscopes
  • 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths
  • Up to 4 GS/s sample rate
  • Long Memory – up to 20 Mpts
  • 10.1” capacitive touch screen display
  • 16 Digital Channel MSO option
  • MAUI - Most Advanced User Interface
    • Designed for Touch
    • Built for Simplicity
    • Made to Solve
  • Advanced Anomaly Detection
    • Fast Waveform Update
    • History Mode - Waveform Playback
    • WaveScan - Search and Find
  • Multi-Instrument Capabilities
    • Protocol Analysis - Serial Trigger and Decode
    • Waveform Generation - Built-in Function Generator
    • Digital Voltmeter and Frequency Counter
  • Future Proof
    • Upgradeable Bandwidth
    • Field Upgradable Software and Hardware Options

Teledyne LeCroy - WaveRunner 9000 Oscilloscopes
  • 500 MHz - 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • MAUI with OneTouch
  • Powerful, Deep Toolbox
  • Exceptional Serial Data Tools
  • 16 digital channels with 1.25 GS/s
  • Huge Applied Offset Range
  • Optional Application Packages

Teledyne LeCroy - LabMaster 9 Zi-A Oscilloscopes 13GHz-45GHz
  • Up to 45 GHz
  • Up to 80 Channels @ 20 GHz
  • Up to 120 GS/s
  • Up to 768 Mpts/Ch

LabMaster 9 Zi-A modular oscilloscope systems completely re-define oscilloscope performance and capabilities.

  • Multi-channel operation at the highest bandwidths
    • 20 channels @ 45 GHz
    • 40 channels @ 36 GHz
    • 80 channels @ 20, 16, or 13 GHz
  • Bandwidth and channel upgrade flexibility
  • ChannelSync for precise synchronization of all acquisition modules
  • Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM)
  • Ultra-low jitter noise floor (125 fs rms) and ultra-high time base stability.

Teledyne LeCroy - HDO6000A 350MHz-1GHz Oscilloscopes
  • 4 analog channels
  • 12-bit ADC resolution, up to 15-bit with enhanced resolution
  • 350 MHz, 500 MHz and 1 GHz bandwidths
  • Long Memory – up to 250 Mpts/Ch
  • 16 Digital Channel MSO option
  • Serial Data Toolsets
    • Trigger
    • Decode
    • Measure/Graph
    • Eye Diagram
  • 12.1” WXGA multi-touch screen display
  • Wide probe selection for power electronics, embedded electronics, and mechatronics applications
  • Advanced analysis and reporting toolsets
  • Advanced Triggering supplemented with TriggerScan and Measurement Trigger

Teledyne LeCroy - WaveRunner 6 Zi 400MHz-4GHz Oscilloscopes
  • 400 MHz - 4 GHz bandwidths
  • Up to 40 GS/s sample rate
  • 12.1" touch screen display
  • Advanced Tools
    • Spectrum Analyzer Mode
    • WaveScan - Search and Find
    • LabNotebook Documentation and Report Generation 
    • History Mode - Waveform Playback
  • Comprehensive set of serial data analysis, debug, validation and compliance tools
  • Advanced, Triggering with TriggerScan and Measurement Trigger
  • WaveRunner 620MZi complete debug bundle available
  • 18 digital channels with 2 GS/s
    • Analog and Digital Cross-Pattern Triggering
    • Digital Pattern Search and Find
    • Analog and Digital Timing Measurements
    • Logic Gate Emulation
    • Activity Indicators

Teledyne LeCroy - WaveSurfer MXs-B and MSO MXs-B  200MHz-1GHz Oscilloscopes
WaveSurfer MXs-B
  • 200 MHz, 400 MHz, 600 MHz and 1 GHz Bandwidths
  • Up to 10 GS/s Sample Rate
  • 16 Mpts/Ch Memory, 32 Mpts Interleaved
  • Fast Processing of Long Memory and Math
  • Responsive User Interface
  • WaveStream Fast Viewing Mode
  • WaveScan - Advanced Search and Find
  • LabNotebook Documentation and Report Generation
  • 10.4" Touch Screen Display 
  • LXI Compliant
MSO MXs-B
All the great features of the WaveSurfer mXs-B plus:
  • 18 Digital Channels
  • Max. Digital Signal Speed of 250 MHz
  • Analog and Digital Cross Pattern Triggering

Teledyne LeCroy - WaveRunner 8000HD High Definition Oscilloscopes
  • Highest resolution – 12 bits all the time
  • More channels, flexibility – 8 analog and 16 digital channels
  • Longest Memory – 5 Gpt records with simple navigation – no compromise
  • View 16 channels on one display with OscilloSYNC™
  • Powerful, deep toolbox enables and simplifies complex analysis
  • MAUI with OneTouch user interface for intuitive and efficient operation