VIAVI - ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set

VIAVI - ALT-8015 FMCW/Military Pulse Radio Altimeter Test SetVIAVI - ALT-8015 FMCW/Military Pulse Radio Altimeter Test SetVIAVI - ALT-8015 FMCW/Military Pulse Radio Altimeter Test SetVIAVI - ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set
  • Tests military pulse radio altimeters: AN/APN-171(V), AN/APN-194(V) and AN/APN-209(V), including LPI variants
  • Tests FMCW radio altimeters including CDF types
  • Fast detector for tracking LPI radio altimeters with TX power management
  • Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
  • Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
  • Programmable multi-leg climb/descend profiles
  • Large color touch-screen display with simple user interface
  • Remote control interface (Ethernet)
  • Lightweight and compact <10 lbs. (4.5 kg)
  • Battery 4 hours plus duration
  • Software upgradeable

More

The new VIAVI ALT-8015 Radio Altimeter Flightline Test Set provides an easily configurable RF based altitude simulation to quickly test an installation, or direct connect to the Line Replaceable Unit (LRU) for additional troubleshooting capability. A large color touchscreen displays parametric measurements and allows for detailed profiles to be set up to emulate actual airborne conditions.  For commercial applications, see the ALT-8000.

General
The user interface is Windows™ based and provides various pages for control of the test set and display of parametric measurements including: TX power, TX frequency (center), sweep rate, TX pulse width (pulse systems).

Profiles
The Profile page allows the user to create, save, recall or delete named profiles. Each profile is comprised of individual legs. Start, stop altitudes and rates are definable for each leg. A profile can then be executed to simulate a complete landing approach including flare out or a take-off and departure.

RF Coupling
The supplied antenna couplers allow the radio altitude system to be quickly verified without access being required to test ports on the UUT LRU. The RF looped test verifies TX frequency, power, sweep rate, and RF level control provides the means to test UUT sensitivity.

Setup
The setup page allows system, user and RF connection parameters to be set by the user, including RS-232, AID, RF cable loss and altitude offset.

EXPORT CONTROL:This product is subject to the Export Administration (“EAR”) (15 CFR 730-774) and may not be exported, re-exported or otherwise transferred to a foreign person, or outside the United States without authorization from the U.S. Department of Commerce.

Available through your GSA Supplier

More Product Information

VIAVI - ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set
  • Tests FMCW radio altimeters including CDF types
  • Tests pulse radio altimeters (non-pulse compression types)
  • Direct-connect to UUT T/R or to installed system via antenna couplers
  • Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
  • Multi-channel operation (via additional test sets)
  • Programmable multi-leg climb/descend profiles
  • Large touch-screen display with simple user interface
  • Remote control interface USB/LAN
  • Lightweight and compact about 10 lbs. (4.5 kg)
  • Battery 4 hours plus duration

VIAVI - 3515AR-EP Portable Radio Communications Test Set
The 3515AR-EP Test set is a complete communication service monitor designed to test EPLRS radios The 3515AR-EP includes spectrum analyzer, oscilloscope and test script language for automating tests, incorporating test instructions, data collection, etc.

VIAVI - 3515AR Portable Radio Communications Test Set
The 3515AR offers the latest in radio front-line testing, long battery life and superior performance. The 3515AR includes spectrum analyzer, oscilloscope and test script language for automating tests, incorporating test instructions, data collection, etc. 

It offers test scripts for radios and systems, including PRC-117F, PRC-148, fixed-wing and rotary-aircraft, vehicles, and data radios.

VIAVI - RGS-2000NG TCAS Test Set
  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • TCAS and ADS-B Target Generator
  • Simulates 32 dynamic/400 static intruders
  • ADS-B squitter encode/decode
  • More test capability than any tester in the market, all packed into one box
  • Pulse and frequency measurement
  • Transponder test option for Modes A, C, S
  • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
  • Four port antenna simulation
  • Hybrid surveillance
  • Six independent transmitters and two receivers
  • Data parsing for analysis

VIAVI - APM-424 MK XII/XIIA Test Sets
  • DoD AIMS 03-1000A Mark XIIA (Mode 5 level 1 and 2) certified *
  • Transponder Test Set Modes 1, 2, 3/A, C, 4, S, and Mode 5 * (Level 1 & 2)
  • Mode S Elementary and Enhanced Surveillance
  • Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5 * (Level 1 & 2)
  • Self-diagnostic
  • Factory upgrade kits available for APM-424(V)3 and TS-4530 units
* APM-424(V)5 only

VIAVI - IFR 6015 Military Flightline Test Set
  • Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
  • Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
  • ICAO Annex 10 amendment 77
  • ADS-B TX/RX
  • TIS
  • IFF Modes 1 & 2 and TACAN
  • Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
  • TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
  • Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
  • Detachable directional antenna
  • Large 5.7-inch LCD display
  • Simple user interface
  • Lightweight at less than 8 lbs.

VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
  • Easy to operate/calibrate
  • Annual calibration
  • Lightweight / portable
  • Rechargeable battery or externally powered
  • Percent of battery capacity displayed
  • Self-test on power-up
  • Measures DC voltage
  • Manual or Auto Ranging
  • 2 and 3 Wire Meggar
  • Compliant with Boeing Spec 10-61959 Rev H
  • MIL-STD-810 Method 511.4 certified
  • Traceable to NIST
  • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*

VIAVI - PSD60-2R AC Fuel Capacitance Test Set
  • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
  • Modular design for high reliability and low maintenance
  •  Closed box calibration using front panel controls - performed annually
  • Battery powered with percent of charge displayed
  • Maintenance codes displayed to aid in troubleshooting
  • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
  • Large selection of aircraft specific interface cables readily available

VIAVI - IFR 4000 Nav/Comm Flightline Test Set
  • Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
  • Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
  • Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
  • Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
  • Generation of ARINC 596 Selective Calling Tones
  • Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
  • Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
  • Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
  • Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
  • Guided Test capability cuts down total test time