VIAVI - Fuel Interfaces
More Product Information
-
Tests FMCW radio altimeters including CDF types
-
Fast detector for tracking LPI radio altimeters with TX power management
-
Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
-
Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
-
Programmable multi-leg climb/descend profiles
-
Large color touch-screen display with simple user interface
-
Remote control interface (Ethernet)
-
Lightweight and compact
-
Battery 4 hours plus duration
-
Software upgradeable
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
GPS signals simulated: L1, L1C*, L2C*, L5*
-
Galileo signals simulated: E1, E5**, E5a**, E5b**
-
Simultaneous GPS/Galileo simulation
-
WAAS/EGNOS SBAS simulation
-
Static and dynamic simulations via NMEA-0183 File Record and Playback
-
12 channel configuration available with upgrade path (RAIM supported)
-
Programmable space vehicle (SV) parametrics and health
-
User or built-in GPS receiver referenced time and date
-
PVT data available via RS-232
-
User Defined Data Transferable between Linked GPSG units
-
Remote control interface Ethernet
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
-
Fiber optic delay line based test set supports all formats of radio altimeters
-
Portable ruggedized enclosure for flight line or benchtop use
-
Battery operated
-
Simulates static altitudes from 0* ft. to 10,000 ft. in 10 ft. steps (*minimum simulated altitude dependent upon AID and test cable length)
-
+20 dB of power level offset from nominal loop loss value
-
Touch-screen operation
-
Direct-connect to UUT T/R or installed system via antenna couplers
- Solve machine vision applications efficiently by constructing flowcharts instead of writing program code, using field-proven tools for analyzing, classifying, locating, measuring, reading and verifying
- Use a single program for creating both application logic and operator interface
- Leverage deep learning for visual inspection through image classification and segmentation tools
- Rely on a common underlying vision library for the same results with an Iris GTX smart camera, vision systems or third-part computer
- Work with multiple cameras all within the same project or per project running concurrently and independently from one another, platform permitting
- Interface to Zebra AltiZ and third party 3D sensors to visualize, process and analyze depth maps and point clouds
- Communication options include discrete Zebra I/Os, RS-232, and Ethernet (TCP/IP, CC-Link IE Field Basic, EtherNet/IP, Modbus, OPC UA, and PROFINET, and native robot interfaces)
- Maximize productivity with instant feedback on image analysis and processing operations
- Receive immediate pertinent assistance through an integrated contextual guide
- Maintain control and independence through the ability to create custom flowchart steps
- Test communication with PLC using the built-in PLC interface emulator
- Protect against inappropriate changes with the Project Change Validator tool
-
Operates up to 32GTps at PCIe 5.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Supports link widths up to 16-lanes
-
CEM adapter card endpoint DUT devices plug directly into the Test Stand
-
Includes cables for Analyzer connection
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
Data path uses high-speed re-drivers to ensure good signaling
-
Supports automatic link tuning for optimum communication and lowest BER
-
Modular, replaceable 600W power supply powers Test Stand and DUT
-
Supports testing of high-power graphics cards
-
LEDs give quick indicators of power and status
-
Size: Base Pod: 120 x 162 x 30 mm (DxWxH)
-
Works with the VIAVI Xgig5P-PCIe5-X16-PF Analyzer/Exerciser chassis platform
-
Supported by VIAVI Xgig™ Analysis tools for test setup, trace capture, protocol evaluation, etc.
-
Provides consistent, repeatable capture of link training, equalization negotiation and other information
-
Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
-
Modular design for high reliability and low maintenance
-
Closed box calibration using front panel controls - performed annually
-
Battery powered with percent of charge displayed
-
Maintenance codes displayed to aid in troubleshooting
-
Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
-
Large selection of aircraft specific interface cables readily available
-
Three independent, isolated 1,700W channels, 5,100W total
-
1U rack-mount chassis
-
Eight output options
-
Multi-language, intuitive, color touch panel control
-
Global 3-Phase AC Input options for system phase balancing
-
Active power factor correction (PFC)
-
Multi-channel programmable sequencing, ramps, and delays
-
Full remote control via Virtual Panels™ GUI
-
Standard LXI Ethernet, USB and RS232 control interfaces
-
Optional GPIB control interface or isolated analog programming
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500