VIAVI - Fuel Interfaces
More Product Information
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
-
Industry Leading Power Density
-
Up to 1700 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
Supports link widths up to 16-lanes
-
Operates up to 32GTps, PCIe 5.0 data rates
-
Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Industry Leading Power Density
-
Up to 1500 Watts in 1U
-
-
Standard Digital Interfaces – USB&RS232/485
-
LXI Ethernet and Isolated analog interfaces
-
Power Factor Correction-PFC and universal AC input
-
“Green” Sleep Mode – Automatically “sleeps” after period of non-use
-
Built in sequencing - Unload your system controller
-
Programmable fold-back protection delay
-
Easy to operate/calibrate
-
Annual calibration Lightweight / portable
-
Rechargeable battery or externally powered
-
Percent of battery capacity displayed
-
Self-test on power-up
-
Measures DC voltage Manual or Auto Ranging
-
2 and 3 Wire Meggar
-
Compliant with Boeing Spec 10-61959 Rev H
-
MIL-STD-810 Method 511.4 certified
-
Traceable to NIST
-
Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
-
3 independent, isolated 600W channels
-
Total power density up to 1800W in a 1U chassis
-
4 autoranging output channel options
-
Intuitive color touch panel control
-
Multi-language display for global operation
-
Multi-channel programmable sequencing, ramps and delays
-
Active power factor correction (PFC)
-
Standard LXI LAN, USB, and RS232 interfaces
-
Optional GPIB interface
-
Full remote control via Virtual Panels™
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
ADS-B Target Generator
-
ADS-B squitter encode/decode
-
DO-260, DO-260A and DO-260B data parsing
-
DO-260B canned tests available (option)
-
Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
-
UAT TX/RX capability (optional)
-
Pulse and frequency measurement
-
10.4 inch touch screen LCD display for operator control of all test set capabilities
-
Remote controlled via GPIB or Ethernet
-
Two independent transmitters and receivers
-
TX/RX data logging capability
-
Full diversity testing capability
-
Data parsing in engineering units
-
High Power AC and DC Power Source
-
Programmable AC and DC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 15, 22.5, 30, and 45 kVA per unit and multi-unit configurations for power requirements up to 135 kVA and above
-
-
Single and Three Phase Mode
-
Phase mode programming on MX22.5-3Pi, MX30-3Pi and MX45-3Pi allows switching between single and three phase output modes
-
-
Arbitrary & Harmonic Waveform Generation
-
User defined voltage waveform and distortion programming
-
-
Regenerative, bidirectional “Green” Power Solution
-
Automatic crossover between Source and Sink power mode offers regenerative capabilities in AC mode. Regenerate up to 100% of the rated output power back to the utility grid during sink mode operation. ( -SNK option )
-
-
Remote Control
-
Standard RS232C & USB along with optional IEEE- 488 & LAN Interfaces are available for automated test applications
-
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2 and Gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Integrates seamlessly with Xgig Expert™ for problem and performance analysis
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500