VIAVI - Fuel Interfaces
More Product Information
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2 and Gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Integrates seamlessly with Xgig Expert™ for problem and performance analysis
-
Supports link widths up to and including 4-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 4-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power Supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Tests MARK XIIA IFF transponders and interrogators
-
Tests TACAN receiver-transmitters
-
Can be configured to test KIV-77 and KIV-78 crypto appliqués
-
Large Touch-screen color display
-
Manual or automated testing
-
Test reports are automatically generated
-
Includes industry leading proprietary THORsi Test Executive
-
Ease of use - navigating between test modes is as easy as pushing a button
-
Affordable – no need to purchase multiple stations that take up valuable lab space; purchase only the Test Program Sets (TPS) you need today
-
Expandable - to add test capability, simply purchase additional TPS’s
-
In-house test/repair capability eliminates long delays and reduces number of LRU spares needed
-
GPS signals simulated: L1, L1C*, L2C*, L5*
-
Galileo signals simulated: E1, E5**, E5a**, E5b**
-
Simultaneous GPS/Galileo simulation
-
WAAS/EGNOS SBAS simulation
-
Static and dynamic simulations via NMEA-0183 File Record and Playback
-
12 channel configuration available with upgrade path (RAIM supported)
-
Programmable space vehicle (SV) parametrics and health
-
User or built-in GPS receiver referenced time and date
-
PVT data available via RS-232
-
User Defined Data Transferable between Linked GPSG units
-
Remote control interface Ethernet
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
-
Fiber optic delay line based test set supports all formats of radio altimeters
-
Portable ruggedized enclosure for flight line or benchtop use
-
Battery operated
-
Simulates static altitudes from 0* ft. to 10,000 ft. in 10 ft. steps (*minimum simulated altitude dependent upon AID and test cable length)
-
+20 dB of power level offset from nominal loop loss value
-
Touch-screen operation
-
Direct-connect to UUT T/R or installed system via antenna couplers
-
Configurable test capability
-
Intuitive user interface
-
Software defined applications
-
Remote operation
-
Android™ and iOS® compatible
-
Guided Test
-
Built-in GPS receiver
-
International test configurations Purchase only the test options that you need
-
Time saving ease of operation
-
Easily updated with future applications
-
Conveniently test in and around the aircraft from your mobile device
-
Recall saved test sequences for future use
-
Provides accurate positional data for ADS-B testing
-
Compliant with global regulatory requirements
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500