VIAVI - IFR 6015 Military Flightline Test Set
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
More Product Information
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel
-
including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
-
Tests FMCW radio altimeters including CDF types
-
Tests pulse radio altimeters (non-pulse compression types)
-
Direct-connect to UUT T/R or to installed system via antenna couplers
-
Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
-
Multi-channel operation (via additional test sets)
-
Programmable multi-leg climb/descend profiles
-
Large touch-screen display with simple user interface
-
Remote control interface USB/LAN
-
Lightweight and compact about 10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
-
Tests military pulse radio altimeters: AN/APN-171(V), AN/APN-194(V) and AN/APN-209(V), including LPI variants
-
Tests FMCW radio altimeters including CDF types
-
Fast detector for tracking LPI radio altimeters with TX power management
-
Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
-
Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
-
Programmable multi-leg climb/descend profiles
-
Large color touch-screen display with simple user interface
-
Remote control interface (Ethernet)
-
Lightweight and compact <10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
-
Software upgradeable
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
TCAS and ADS-B Target Generator
-
Simulates 32 dynamic/400 static intruders
-
ADS-B squitter encode/decode
-
More test capability than any tester in the market, all packed into one box
-
Pulse and frequency measurement
-
Transponder test option for Modes A, C, S
-
Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
-
10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
-
Four port antenna simulation
-
Hybrid surveillance
-
Six independent transmitters and two receivers
-
Data parsing for analysis
-
DoD AIMS 03-1000A Mark XIIA (Mode 5 level 1 and 2) certified *
-
Transponder Test Set Modes 1, 2, 3/A, C, 4, S, and Mode 5 * (Level 1 & 2)
-
Mode S Elementary and Enhanced Surveillance
-
Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5 * (Level 1 & 2)
-
Self-diagnostic
-
Factory upgrade kits available for APM-424(V)3 and TS-4530 units
* APM-424(V)5 only
-
Easy to operate/calibrate
-
Annual calibration
-
Lightweight / portable
-
Rechargeable battery or externally powered
-
Percent of battery capacity displayed
-
Self-test on power-up
-
Measures DC voltage
-
Manual or Auto Ranging
-
2 and 3 Wire Meggar
-
Compliant with Boeing Spec 10-61959 Rev H
-
MIL-STD-810 Method 511.4 certified
-
Traceable to NIST
-
Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
-
Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
-
Modular design for high reliability and low maintenance
-
Closed box calibration using front panel controls - performed annually
-
Battery powered with percent of charge displayed
-
Maintenance codes displayed to aid in troubleshooting
-
Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
-
Large selection of aircraft specific interface cables readily available