VIAVI - IFR6015 Military Flight Line Test Set
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
The IFR6015 is a compact, lightweight and weatherproof unit designed for testing Transponder Modes 1,2,3A,C,S, TCAS I, II, and Military E-TCAS, TIS as well as DME/TACAN. IFF Modes 1,2 and TACAN are standard on all new units. For upgrades to existing units contact VIAVI Solutions. NSN: 6625-01-574-2423.
Deployment
Radiated Testing:
The IFR6015 is supplied with a lightweight fully sealed directional antenna that may be test set mounted, hand held or tripod mounted.
Direct Connect Testing:
The IFR6015 may be directly connected to the UUT via a supplied RF coax cable via the RF I/O port.
Direct Connect with Coupler Testing:
Isolated testing can be accomplished with use of an optional single or dual coupler kit for diverse systems.
Technical Specs
Applications
-
Verifify the performance of:
- MK10A, MK12 & MK12/S IFF Transponders (excluding Mode 4)
- Mode S, ATCRBS, ADS-B and UAT transponders
- TACAN T/R & A/A Interrogators
- DME A/A Interrogators
- ADS-B and UAT receivers via target generation
- TIS, TCAS I or II, and E-TCAS systems
- Emulate preset modes of TACAN Test Sets: Generic DoD, AN/ASM-663, AN/ ARM-184, Bradley 2650 & 2655
Document
Document
Document
Document
Document
More Product Information
-
Input AC, Input Frequency Input and Output AC, Output Frequency Output, Double Conversion, On-Line, Isolated Rugged UPS with Power Factor Correction for Military Applications
The SSMIL200V10K18G System is designed to develop a 200 V/m field level at a 1m test distance for MIL-STD- 461D/E/F/G testing from 10 kHz to 18 GHz. The signal generation, control, and power monitoring equipment shall be mounted in a ventilated equipment rack along with the RF amplifiers.
The SSMIL200V10K18G AR System consists of the AR equipment, listed herein. Please refer to individual product specification sheets for details. The export classification for this equipment is 3A001. This equipment is controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
AR Standardized Systems are customizable upon request. Contact AR for all such requests.
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
-
2400 VA, 2000 Watts, 120 VAC, 60 Hz, Double Conversion, On-Line, Isolated, Rugged UPS with Power Factor Correction for Military Applications
-
3KVA, 3KW Double Conversion On Line Isolated 115VAC Input UPS, and simultaneous 120 and 240VAC 60Hz Output, Power Factor Correction, Extended Internal Batteries, SNMP Communications for Military Applications
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Rugged, Double Conversion, High Temperature, Galvanic Isolation, Global Input with 120VAC Output using Lithium Iron Phosphate Battery Chemistry. True Online UPS and Power Conditioning/Conversion System with Power Factor Correction for Military Applications in a Rack Mount Enclosure
-
400VA/250 Watt 120 VAC Input & Output Rugged, Rack Mount, Double Conversion, High Temperature, On-Line UPS & Isolated Power Conditioning System with Frequency Conversion, Power Factor Correction, Front Panel Hot Swap Battery & SNMP Communications for Military Applications in a 2U 13 inch deep enclosure
Unlike other testers, the ALT-8000 tests from the antenna to the indicator in the cockpit, allowing the operator to replicate in-flight conditions and isolate a bad component of the installed system.
-
Tests FMCW radio altimeters including CDF types
-
Tests pulse radio altimeters (non-pulse compression types)
-
Direct-connect to UUT T/R or to installed system via antenna couplers
-
Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
-
Multi-channel operation (via additional test sets)
-
Programmable multi-leg climb/descend profiles
-
Large touch-screen display with simple user interface
-
Remote control interface USB/LAN
-
Lightweight and compact about 10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
