VIAVI - PSD60-1AF Military AC Fuel Capacitance Test Set
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
The PSD60-1AF is designed to calibrate and troubleshoot any AC capacitive fuel, oil or LOX quantity system. This test set is utilized extensively by rotary and fixed-wing military aircraft operators around the world.
The PSD60-1AF will:
- Measure the capacitance of any AC capacitive fuel, oil or LOX quantity transmitter, or sets of transmitters connected in parallel
- Simulate either one or two capacitors simultaneously to calibrate any AC capacitive liquid quantity gauging system
- Measure the insulation resistance in megohms of capacitive liquid quantity transmitters (probes) and/or aircraft wiring
NSN: 6625-01-297-5305
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Versions
- 699 PSD60-1AF AC Fuel Capacitance Test Set
Aircraft specific interface cables are required and must be purchased separately.
Standard Accessories
- 57306 Cable, Hi-Z BNC to two-clip (55-0605-13)
- 57307 Cable, Lo-Z polarized BNC to alligator clip (55-0605-14)
- 57308 Cable, Hi-Z BNC to BNC (55-0605-15)
- 57309 Cable, polarized BNC to standard BNC (55-0605-16)
- 58345 Cable, ground strap (55-7002-00)
Technical Specs
- Weight 12 lbs (5.44 kg)
- Width 12.0 in (30.5 cm)
- Height 6.0 in (15.2 cm)
- Depth 9.0 in (22.9 cm)
More Product Information
-
MK XIIA AIMS certified for Level 1 and Level 2
-
Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
-
Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
-
Separate connections for direct or over-the-air testing
-
Software defined radio design allows waveform flexibility and future growth potential
-
Dual signal generator design allows coordinated signal production for interference and echo testing
-
Remote interfaces consist of RS-232, Ethernet and GPIB
-
GUI allows easy access to test features
-
Industry wide use in development and end item testing of transponders and interrogators
-
Tests FMCW radio altimeters including CDF types
-
Fast detector for tracking LPI radio altimeters with TX power management
-
Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
-
Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
-
Programmable multi-leg climb/descend profiles
-
Large color touch-screen display with simple user interface
-
Remote control interface (Ethernet)
-
Lightweight and compact
-
Battery 4 hours plus duration
-
Software upgradeable
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
ADS-B Target Generator
-
ADS-B squitter encode/decode
-
DO-260, DO-260A and DO-260B data parsing
-
DO-260B canned tests available (option)
-
Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
-
UAT TX/RX capability (optional)
-
Pulse and frequency measurement
-
10.4 inch touch screen LCD display for operator control of all test set capabilities
-
Remote controlled via GPIB or Ethernet
-
Two independent transmitters and receivers
-
TX/RX data logging capability
-
Full diversity testing capability
-
Data parsing in engineering units
-
Supports link widths up to 16-lanes
-
Operates up to 32GTps, PCIe 5.0 data rates
-
Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
OCulink host and target connectors support PCIe links of up to and including 4-lanes
-
Supplied with two, high-performance SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Provided with Slimline 4-lane to 4-lane OCulink conversion cables
-
Two cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and operation
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Up to four Interposers are stackable to support wider length widths
-
Supports Jammer error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
-
Generates and responds to PCIe complaint data packets
-
Operates to 32GTps, and supports all other PCIe data rates of 2.5, 5.0, 8.0 and 16GTps
-
Supports link widths of 1, 2, 4, 8 and 16-lanes
-
Set link rates and widths and control transitions other rates
-
Tightly aligned operation with the Analyzer for fully detailed bit-level trace captures
-
Execute the PCIe compliance test suite
-
Perform LTSSM testing: both positive and negative test scenarios
-
LTSSM state tracker with history log
-
Define custom test configurations, save and load
-
Define custom test suites and execution sequence
-
Swap DLLP ACK to NACK responses. Modify CRC
-
Define, send, and modify Ordered Sets
-
Template libraries available
-
Scripting API allows complex test cases
-
Graphical control interface provides easy visual presentation and setup of test procedures
-
Xgig tools and the Exerciser user interface operate on a Windows 10 enabled PC
-
Runs on the VIAVI 5P16 Analysis Platform chassis, Xgig5P-PCIe5-X16-PF
-
Works with the Xgig5P-PCIe5-X16-EH Exerciser Host-Mode Test Stand
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500