VIAVI - PSD60-1AF Military AC Fuel Capacitance Test Set
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
The PSD60-1AF is designed to calibrate and troubleshoot any AC capacitive fuel, oil or LOX quantity system. This test set is utilized extensively by rotary and fixed-wing military aircraft operators around the world.
The PSD60-1AF will:
- Measure the capacitance of any AC capacitive fuel, oil or LOX quantity transmitter, or sets of transmitters connected in parallel
- Simulate either one or two capacitors simultaneously to calibrate any AC capacitive liquid quantity gauging system
- Measure the insulation resistance in megohms of capacitive liquid quantity transmitters (probes) and/or aircraft wiring
NSN: 6625-01-297-5305
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Versions
- 699 PSD60-1AF AC Fuel Capacitance Test Set
Aircraft specific interface cables are required and must be purchased separately.
Standard Accessories
- 57306 Cable, Hi-Z BNC to two-clip (55-0605-13)
- 57307 Cable, Lo-Z polarized BNC to alligator clip (55-0605-14)
- 57308 Cable, Hi-Z BNC to BNC (55-0605-15)
- 57309 Cable, polarized BNC to standard BNC (55-0605-16)
- 58345 Cable, ground strap (55-7002-00)
Technical Specs
- Weight 12 lbs (5.44 kg)
- Width 12.0 in (30.5 cm)
- Height 6.0 in (15.2 cm)
- Depth 9.0 in (22.9 cm)
More Product Information
-
Tests FMCW radio altimeters including CDF types
-
Fast detector for tracking LPI radio altimeters with TX power management
-
Direct-connect to UUT transmit/receive port or to installed system via antenna couplers
-
Ratio-metric RF loop test allows TX, RX, antenna or feeder faults to be identified
-
Programmable multi-leg climb/descend profiles
-
Large color touch-screen display with simple user interface
-
Remote control interface (Ethernet)
-
Lightweight and compact
-
Battery 4 hours plus duration
-
Software upgradeable
-
Operates up to 32GTps at PCIe 5.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Supports link widths up to 16-lanes
-
CEM adapter card endpoint DUT devices plug directly into the Test Stand
-
Includes cables for Analyzer connection
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
Data path uses high-speed re-drivers to ensure good signaling
-
Supports automatic link tuning for optimum communication and lowest BER
-
Modular, replaceable 600W power supply powers Test Stand and DUT
-
Supports testing of high-power graphics cards
-
LEDs give quick indicators of power and status
-
Size: Base Pod: 120 x 162 x 30 mm (DxWxH)
-
Works with the VIAVI Xgig5P-PCIe5-X16-PF Analyzer/Exerciser chassis platform
-
Supported by VIAVI Xgig™ Analysis tools for test setup, trace capture, protocol evaluation, etc.
-
Provides consistent, repeatable capture of link training, equalization negotiation and other information
-
Solid-state circuits and LCD backlit display for low power consumption and high reliability
-
Battery-powered for complete portability and ease of maintenance
-
Lightweight aluminum case has hinged compartment in lid for test lead storage
-
Small size permits testing in restricted spaces
-
Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
-
Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks
-
Operates up to 16GTps, PCIe gen-4 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
SFF-8674 host and target connections support PCIe links of up to 4-lanes
-
Multiple Interposers can be used with links to 16-lanes.
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer plus two cables for DUT attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal capture and triggering in multiple formats
-
Two coax cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and status
-
Size: (L x W x H): 112 x 150 x 30 mm (incl. rubber stands)
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data traffic
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
-
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
-
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
-
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
-
Generation of ARINC 596 Selective Calling Tones
-
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
-
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
-
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
-
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
-
Guided Test capability cuts down total test time
-
Low cost ELT option
-
Frequency counter provides external frequency measurement
-
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
-
Eight or more hours of operation before recharge
-
Automatic power shut-down
-
Ergonomic design
-
Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
-
Large keys for gloved operation
-
Simple user interface
-
Lightweight and compact at 8 lbs.
-
Battery operation 6 hours plus between charges
-
Fully FAR part 43 appendix F compliant
-
Transponder Auto-Test
-
Data dump of transponder test results to PC
-
Elementary and Enhanced Surveillance parameters (DAP’s)
-
Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
-
Comprehensive GICB test
-
Configuration files for different classes of transponder
-
Comprehensively tests any DME channel including track sensitivity
-
User selectable TCAS scenarios
-
TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
-
Over-the-air or direct-connect operation
-
Parametric measurements including TX power and frequency
-
USB flash drive software update via web site download
-
Optional ADS-B capabilities are DO-260A/B compliant
-
Optional TCAS and 978 MHz UAT capability
-
Optional testing using UC-584 Coupler
-
MK XIIA AIMS certified for Level 1 and Level 2
-
Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
-
Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
-
Separate connections for direct or over-the-air testing
-
Software defined radio design allows waveform flexibility and future growth potential
-
Dual signal generator design allows coordinated signal production for interference and echo testing
-
Remote interfaces consist of RS-232, Ethernet and GPIB
-
GUI allows easy access to test features
-
Industry wide use in development and end item testing of transponders and interrogators
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500