VIAVI - PSD60-2R AC Fuel Capacitance Test Set

VIAVI - PSD60-2R AC Fuel Capacitance Test Set
  • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
  • Modular design for high reliability and low maintenance
  •  Closed box calibration using front panel controls - performed annually
  • Battery powered with percent of charge displayed
  • Maintenance codes displayed to aid in troubleshooting
  • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
  • Large selection of aircraft specific interface cables readily available

More

The PSD60-2R Fuel Quantity Test Set is an accurate, stable unit designed to test AC capacitance type fuel quantity measurement systems and their line replaceable components. The PSD60-2R, along with aircraft-specific interface units or cables*, provides complete capability to test most aircraft with AC capacitance systems.

The PSD60-2R performs these functions: 

  • Measurement of total tank capacitance, individual tank units and compensators 
  • Simulation of capacitance for indicator calibration 
  • Simulation of compensator capacitance value for dry calibration 
  • Measurement of the insulation resistance of tank units and aircraft harness 
  • Measurement of coax center conductor to shield for fault isolation 
  • Display of capacitance resolution to 0.00 pF for accurate individual tank unit test¬ing (to 199.99 pF)

*Aircraft-specific interface cables are required and must be purchased separately. 

Available through your GSA supplier

More Product Information

VIAVI - PSD60-1AF Military AC Fuel Capacitance Test Set
  • Solid-state circuits and LCD backlit display for low power consumption and high reliability
  • Battery-powered for complete portability and ease of maintenance
  • Lightweight aluminum case has hinged compartment in lid for test lead storage
  • Small size permits testing in restricted spaces
  • Push-button "extended range" switch permits readings up to 9,999 pf or 10,000 megohms - over-range indication on LCD
  • Tested and approved for use in any function with fuel in tanks; battery power eliminates need for voltage (safety) checks

VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
  • Easy to operate/calibrate
  • Annual calibration
  • Lightweight / portable
  • Rechargeable battery or externally powered
  • Percent of battery capacity displayed
  • Self-test on power-up
  • Measures DC voltage
  • Manual or Auto Ranging
  • 2 and 3 Wire Meggar
  • Compliant with Boeing Spec 10-61959 Rev H
  • MIL-STD-810 Method 511.4 certified
  • Traceable to NIST
  • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*

VIAVI - PSD30-2AF Universal DC Fuel Capacitance Test Set
  • Solid-state circuits and Liquid Crystal Display for low power consumption and high reliability. LCD is backlit for enhanced viewing.
  • Tested and approved for use with fuel in tanks.
  • Portable, lightweight, sealed, high-impact ABS case reduces weight of tester with batteries installed to less than 12 pounds.
  • Small size permits testing in restricted spaces - 10.5"W x 14"L x 6"H. Ideal for Forward Area Deployment.
  • Easy to operate; choose the FUNCTION desired and read the measured capacitance, insulation or voltage on the display.
  • Auto-ranging circuit and 4.5 digit display permit resolution to .01 Pf in capacitance functions and .01 meg in insulation (megger) function.
  • Digital Multi-Meter (DMM) function reads external voltage up to 40 VDC.
  • BATTERY CHECK function reads % of usable battery charge remaining.
  • Recommended annual calibration interval. Stability of the measuring circuit eliminates need to recalibrate each time unit is used.
  • Two year standard warranty.
  • CE Marked - 

VIAVI - Fuel Interfaces
VIAVI supports many rotary and fixed-wing aircraft platforms with an extensive library of aircraft specific interface cables and units.  Combined with a VIAVI Fuel Quantity Test Set, the VIAVI test solution provides complete functional testing and troubleshooting of the fuel quantity system.  If you are unable to find your aircraft listed here, VIAVI also offers design services for the development of new interfaces and aircraft test procedures.    
Available through your GSA Supplier  

VIAVI - RGS-2000NG TCAS Test Set
  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • TCAS and ADS-B Target Generator
  • Simulates 32 dynamic/400 static intruders
  • ADS-B squitter encode/decode
  • More test capability than any tester in the market, all packed into one box
  • Pulse and frequency measurement
  • Transponder test option for Modes A, C, S
  • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
  • Four port antenna simulation
  • Hybrid surveillance
  • Six independent transmitters and two receivers
  • Data parsing for analysis

VIAVI - APM-424 MK XII/XIIA Test Sets
  • DoD AIMS 03-1000A Mark XIIA (Mode 5 level 1 and 2) certified *
  • Transponder Test Set Modes 1, 2, 3/A, C, 4, S, and Mode 5 * (Level 1 & 2)
  • Mode S Elementary and Enhanced Surveillance
  • Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5 * (Level 1 & 2)
  • Self-diagnostic
  • Factory upgrade kits available for APM-424(V)3 and TS-4530 units
* APM-424(V)5 only

VIAVI - IFR 6015 Military Flightline Test Set
  • Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
  • Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
  • ICAO Annex 10 amendment 77
  • ADS-B TX/RX
  • TIS
  • IFF Modes 1 & 2 and TACAN
  • Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
  • TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
  • Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
  • Detachable directional antenna
  • Large 5.7-inch LCD display
  • Simple user interface
  • Lightweight at less than 8 lbs.

VIAVI - IFR 4000 Nav/Comm Flightline Test Set
  • Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
  • Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
  • Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
  • Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
  • Generation of ARINC 596 Selective Calling Tones
  • Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
  • Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
  • Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
  • Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
  • Guided Test capability cuts down total test time

VIAVI - IFR 6000 Ramp/Flightline Test Set
  • Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
  • Large keys for gloved operation
  • Simple user interface
  • Lightweight and compact at 8 lbs.
  • Battery operation 6 hours plus between charges
  • Fully FAR part 43 appendix F compliant
  • Transponder Auto-Test
  • Data dump of transponder test results to PC
  • Elementary and Enhanced Surveillance parameters (DAP’s)
  • Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
  • Comprehensive GICB test
  • Configuration files for different classes of transponder
  • Comprehensively tests any DME channel
  • including track sensitivity
  • User selectable TCAS scenarios
  • TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
  • Over-the-air or direct-connect operation
  • Parametric measurements including TX power and frequency
  • USB flash drive software update via web site download
  • Optional ADS-B capabilities are DO-260A/B compliant
  • Optional TCAS and 978 MHz UAT capability
  • Optional testing using UC-584 Coupler