VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
-
Easy to operate/calibrate
-
Annual calibration Lightweight / portable
-
Rechargeable battery or externally powered
-
Percent of battery capacity displayed
-
Self-test on power-up
-
Measures DC voltage Manual or Auto Ranging
-
2 and 3 Wire Meggar
-
Compliant with Boeing Spec 10-61959 Rev H
-
MIL-STD-810 Method 511.4 certified
-
Traceable to NIST
-
Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*
The PSD90-1C Universal AC/DC Capacitance Test Set will test any AC or DC Capacitive Fuel, Water, LOX or Engine Oil Quantity System*. The PSD90-1C has features that allow the user to better troubleshoot and isolate fuel system problems. Rugged in design, the unit can be used anywhere testing and troubleshooting is required. Capable of being operated with external power, the PSD90-1C is ideal for shop or Depot Level repair of fuel system components.
NSN: 4920-01-510-5628 Designed for F-16 fleet
NSN: 4920-01-528-2230 Designed for universal non-F16 fleet
*Aircraft-specific interface cables are required and must be purchased separately.
Available through your GSA supplier
Technical Specs
Size
- 10.6” x 14” x 6.5” (26.9 cm x 35.6 cm x 16.5 cm)
- 13 lbs
More Product Information
-
Interposers: x8 and x16 Slot, x4 Flying Lead pod, x4 M.2, x4 U.2 (available in dual port), and x16 SFF-8644
-
1U+ chassis with 128GB memory (64GB upstream and 64GB downstream)
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneously Analyze and Jam on a single chassis using one interposer
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
The Tap Upstream and Downstream ports allow AJA configuration Jamming
-
Cascade up to 4 Xgig captures into a single trace view
-
Full support of LTSSM for PCI Express
-
Memory segmentation for capture of multiple traces
-
Field replaceable modular fan and power supply assemblies
-
Portable, lightweight, and stand-alone
-
One-year hardware and three-year software warranties for the Xgig 4K16 PCI Express 4.0 Protocol Analyzer/Jammer
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
VIAVI designed RF test system, fully integrated into the ATEC® Test System
-
Simple Ethernet interface between RFEM and ATEC® Test System permits easy retrofit to existing ATE installations
-
Powerful test executive interface offers many advantages to the test operator
-
Global service and support provided jointly by SPHEREA and VIAVI Solutions
-
Extensive CMM-listed TPS library in development or planned, covering Nav, Comm, TCAS, Transponder, GPS, and other RF systems
-
Complete RFEM and TPS information can be consulted on the SPHEREA Customer Support and Services MySpherea Internet web site
-
Our objective is to offer test coverage of RF products from all major OEMs
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
OCulink host and target connectors support PCIe links of up to and including 4-lanes
-
Supplied with two, high-performance SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Provided with Slimline 4-lane to 4-lane OCulink conversion cables
-
Two cables supplied for optional clocking sources
-
Interposer power is independent of host system.
-
A 120/220 AC in, 12V/3A DC output converter is included
-
LEDs give quick indication of power and operation
-
Works together with VIAVI Xgig 4K Analyzer platforms
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Up to four Interposers are stackable to support wider length widths
-
Supports Jammer error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
-
Operates up to 32GT/s, PCIe 5.0 data rates
-
Downward compatible with PCIe Gen-1, Gen-2, Gen-3 and Gen-4 data rates of 2.5, 5.0, 8.0 and 16.0GT/s
-
Supports PCIe links of up to 4-lanes
-
M.2 PCIe SSD DUT plugs directly into the Interposer
-
Supports M.2 card types 2230, 2242, 2260, 2280 and 22110
-
Custom cable with PCB connects to host system DUT
-
Data path uses high-speed linear redrivers to ensure good signal capture with little or no tuning
-
Supplied with two high-quality SFF-8764 equivalent custom cables for Analyzer attachment
-
Supports Analyzer side-band signal capture and triggering
-
Interposer power is independent of host system
-
A 120/220 AC in, 12V/3A DC output converter is included
-
Integrates seamlessly with the Xgig software tools suite, including Expert™, for problem and performance analysis
-
Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
-
Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
-
ICAO Annex 10 amendment 77
-
ADS-B TX/RX
-
TIS
-
IFF Modes 1 & 2 and TACAN
-
Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
-
TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
-
Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
-
Detachable directional antenna
-
Large 5.7-inch LCD display
-
Simple user interface
-
Lightweight at less than 8 lbs.
-
GPS signals simulated: L1, L1C*, L2C*, L5*
-
Galileo signals simulated: E1, E5**, E5a**, E5b**
-
Simultaneous GPS/Galileo simulation
-
WAAS/EGNOS SBAS simulation
-
Static and dynamic simulations via NMEA-0183 File Record and Playback
-
12 channel configuration available with upgrade path (RAIM supported)
-
Programmable space vehicle (SV) parametrics and health
-
User or built-in GPS receiver referenced time and date
-
PVT data available via RS-232
-
User Defined Data Transferable between Linked GPSG units
-
Remote control interface Ethernet
* For tracking of L1C, L2C or L5 signals some receivers require synchronized L1 transmissions.
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
** For tracking of E5 signals some receivers require synchronized E1 transmissions.
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500
Test & Measurement
Download Line Card
Document
Embedded
Download Line Card
Document
