VIAVI - Xgig E1 EDSFF Interposer for PCI Express 4.0
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 or 8 lanes
-
EDSFF E1.L or E1.S NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Includes 4 high-quality, mini-SAS HD 4X cables for Analyzer connection
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
The supplied power brick makes interposer power is independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
Xgig4K-PCIe4-X8-E1 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers.
The VIAVI Solutions Xgig4K-PCIe4-X8-E1 is an Active Interposer for PCI Express® 4.0 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers. Bidirectional PCIe 4.0 protocol data on 8-lanes can be captured at 16GTps for analysis.
More Product Information
-
Supports link widths up to and including 8-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 8-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with four, high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
32 GT/s, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16.0GTps
-
Link widths up to 8-lanes
-
Memory segmentation for capture of multiple traces
-
Simultaneous two-link, dual port capture is allowed by multiple users
-
Host-Client connection for remote debugging using Ethernet, or local debugging using USB
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer logic sub-blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/ Gather Lists (SGL) etc.
-
Cascade up to four Xgig captures into a single trace view
-
Full support of LTSSM for analysis
-
Field replaceable modular fan and power supply assemblies
-
LED’s give quick indicators of power and status
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Modular
-
Assemble your own system. Plug-in RF modules and COTS-based CPUs, GPUs, FPGAs. Selection of JTNC SCA devices (Ethernet, GPS, audio, etc.)
-
-
Multi-Domain
-
Use across your entire organization. Develop for tactical radio, radar, electronic warfare, and signal intelligance domains
-
-
Integrated
-
Accelerate time to market with seamlessly integrated hardware an d osftware. Leverage pre-loaded NordiaSoft SCARI Software Suite
-
-
Multi-Purpose
-
Reduce cost. Support full life cycle development. Simulate design, emulate, and test on one integrated system
-
-
Scalable
-
Protect your investment. Benefit from a true component-based architecture for hardware and software
-
-
Universal
-
Future-proof your products. Leverage open, standards-based COTS software and hardware
-
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
TCAS and ADS-B Target Generator
-
Simulates 32 dynamic/400 static intruders
-
ADS-B squitter encode/decode
-
More test capability than any tester in the market, all packed into one box
-
Pulse and frequency measurement Transponder test option for Modes A, C, S
-
Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
-
10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
-
Four port antenna simulation
-
Hybrid surveillance
-
Six independent transmitters and two receivers
-
Data parsing for analysis
-
Simplifies test setup with inline operation and automated discovery
-
Tests across a wide range of protocols
-
Modifies real-world network traffic and CRCs
-
Triggers protocol analyzers or other test instruments at the error injection point
-
Automates regression testing through stored test cases
-
Tests MARK XIIA IFF transponders and interrogators
-
Tests TACAN receiver-transmitters
-
Can be configured to test KIV-77 and KIV-78 crypto appliqués
-
Large Touch-screen color display
-
Manual or automated testing
-
Test reports are automatically generated
-
Includes industry leading proprietary THORsi Test Executive
-
Ease of use - navigating between test modes is as easy as pushing a button
-
Affordable – no need to purchase multiple stations that take up valuable lab space; purchase only the Test Program Sets (TPS) you need today
-
Expandable - to add test capability, simply purchase additional TPS’s
-
In-house test/repair capability eliminates long delays and reduces number of LRU spares needed
-
Supports link widths up to 16-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 16-lane PCB finger connector installs into host test system’s 16-lane PCIe slot
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports error injection for deep system analysis
-
Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the 16-lane Card Electro-Mechanical (CEM) specification
-
Size: 230mm deep x 185mm tall x 15mm thick
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
-
Modular design for high reliability and low maintenance
-
Closed box calibration using front panel controls - performed annually
-
Battery powered with percent of charge displayed
-
Maintenance codes displayed to aid in troubleshooting
-
Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
-
Large selection of aircraft specific interface cables readily available
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 or 8 lanes
-
EDSFF E1.L or E1.S NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Includes 4 high-quality, mini-SAS HD 4X cables for Analyzer connection
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
The supplied power brick makes interposer power is independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500