VIAVI - Xgig E1 EDSFF Interposer for PCI Express 4.0
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 or 8 lanes
-
EDSFF E1.L or E1.S NVMe SSD DUT (not supplied) plugs directly into the Interposer
-
Includes 4 high-quality, mini-SAS HD 4X cables for Analyzer connection
-
Data path uses high-speed linear redrivers to insure good signal capture with little or no tuning
-
Supports Analyzer side-band signal capture and triggering with display in multiple formats
-
The supplied power brick makes interposer power is independent of host system
-
Works together with the VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Supported by VIAVI Xgig Analyzer tools for trace capture with filter, trigger and more
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
Xgig4K-PCIe4-X8-E1 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers.
The VIAVI Solutions Xgig4K-PCIe4-X8-E1 is an Active Interposer for PCI Express® 4.0 is an Active Interposer optimized for developing, debugging and performance tuning NVMe SSD operation in high-density storage servers. Bidirectional PCIe 4.0 protocol data on 8-lanes can be captured at 16GTps for analysis.
More Product Information
-
Supports link widths up to and including 4-lanes
-
Operates up to 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe gen-1, gen-2 and gen-3 data rates of 2.5, 5.0 and 8.0GTps
-
A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards
-
Bottom edge 4-lane PCB finger connector installs into host test system’s 4-, 8- or 16-lane PCIe slot
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supports Analyzer side-band signal triggering and capture via custom cable
-
Supports clock and trigger I/O
-
Interposer power is independent of host system.
-
Power Supply, 120/220 AC in, 12V/3A DC out converter is included
-
Custom, exchangeable brackets enable secure chassis and endpoint card installations
-
LEDs give quick indication of power and operation
-
Format: Design is based on the PCIe Card Electro-Mechanical (CEM) specification
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
ADS-B equipment installation verification
-
Complete AC 20-165B fast and convenient reporting to identify installation issues
-
STC support
-
Eliminate post STC operational flights
-
Coupled testing in the hangar or on the flight line, eliminates:
-
Open sky requirements
-
GPS repeater
-
Weather issues
-
Interference with ATC operations
-
-
Saves time and money
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
Downward compatible with PCIe 1.0, 2.0 and 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Supports 1 link of 4 lanes, or dual-port operation of 2 links of 2 lanes each
-
Front-end module plugs into system-under-test
-
U.2 NVMe SSD DUT (not supplied) plugs into the Back-end module
-
Adjustable tray clamps and quick-release latch allow for snug fit and hot swap testing
-
Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning
-
Supplied with high-quality, custom SFF-8764 cables for Analyzer system attachment
-
Supports side-band signal triggering and capture
-
Supplied power brick makes Interposer power independent of host system
-
LEDs give quick indicators of power and status
-
Works with VIAVI Xgig 4K4 and 4K16 PCIe 4.0 Analyzer/Jammer chassis
-
Provides consistent, repeatable capture of link training, negotiation and other data
-
Supports error injection for deep system analysis
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
-
Generates and responds to PCIe complaint data packets
-
Operates to 32GTps, and supports all other PCIe data rates of 2.5, 5.0, 8.0 and 16GTps
-
Supports link widths of 1, 2, 4, 8 and 16-lanes
-
Set link rates and widths and control transitions other rates
-
Tightly aligned operation with the Analyzer for fully detailed bit-level trace captures
-
Execute the PCIe compliance test suite
-
Perform LTSSM testing: both positive and negative test scenarios
-
LTSSM state tracker with history log
-
Define custom test configurations, save and load
-
Define custom test suites and execution sequence
-
Swap DLLP ACK to NACK responses. Modify CRC
-
Define, send, and modify Ordered Sets
-
Template libraries available
-
Scripting API allows complex test cases
-
Graphical control interface provides easy visual presentation and setup of test procedures
-
Xgig tools and the Exerciser user interface operate on a Windows 10 enabled PC
-
Runs on the VIAVI 5P16 Analysis Platform chassis, Xgig5P-PCIe5-X16-PF
-
Works with the Xgig5P-PCIe5-X16-EH Exerciser Host-Mode Test Stand
-
Tests FMCW radio altimeters including CDF types
-
Tests pulse radio altimeters (non-pulse compression types)
-
Direct-connect to UUT T/R or to installed system via antenna couplers
-
Full RF loop test allows TX, RX, Antenna or Feeder faults to be identified
-
Multi-channel operation (via additional test sets)
-
Programmable multi-leg climb/descend profiles
-
Large touch-screen display with simple user interface
-
Remote control interface USB/LAN
-
Lightweight and compact about 10 lbs. (4.5 kg)
-
Battery 4 hours plus duration
-
Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
-
ADS-B Target Generator
-
ADS-B squitter encode/decode
-
DO-260, DO-260A and DO-260B data parsing
-
DO-260B canned tests available (option)
-
Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
-
UAT TX/RX capability (optional)
-
Pulse and frequency measurement
-
10.4 inch touch screen LCD display for operator control of all test set capabilities
-
Remote controlled via GPIB or Ethernet
-
Two independent transmitters and receivers
-
TX/RX data logging capability
-
Full diversity testing capability
-
Data parsing in engineering units
-
Simplifies test setup with inline operation and automated discovery
-
Tests across a wide range of protocols
-
Modifies real-world network traffic and CRCs
-
Triggers protocol analyzers or other test instruments at the error injection point
-
Automates regression testing through stored test cases
-
Provides precise storage I/O and TCP or UDP generation with full traffic flexibility and control
-
Accelerates Xgig® root-cause analysis through automatic triggering and advanced tracking of anomalies and errors
-
Enables auto-discovery of devices and automation of all remote testing and validation processes across complex network topologies
VIAVI
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
Contact Details
VIAVI Solutions Inc. Corporate Headquarters
6001 America Center Drive, 6th Floor, San Jose, CA 95002, USA
Phone: +1-408-404-3600
Fax: +1-408-404-4500