VTI Instruments - EMX-4250 Smart High Density Dynamic Signal Analyzer

VTI Instruments - EMX-4250 Smart High Density Dynamic Signal AnalyzerVTI Instruments - EMX-4250 Smart High Density Dynamic Signal Analyzer
  • 204.8 kSa/s/channel, 24-Bit ADC's, 16-Channel
  • Differential inputs deliver superior common mode performance
  • Flexible analog and user defined digital filter combinations
  • -105 dB SFDR
  • Seven auto-ranging input ranges from 100 mV to 10 V
  • Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response

More

The EMX-4250 Smart Dynamic Signal Analyzer incorporates best-in-class analog design methodology to deliver industry leading measurement accuracy while offering scalability from a few channels to thousands of channels. This instrument is ideal for a wide range of applications including noise vibration, and harshness (NVH), machine condition monitoring, rotational analysis, acoustic test, modal test, as well as general purpose high speed digitization and signal analysis.

Distributed Measurements

When combined with the EMX-2500 LXI interface, the EMX-4250 can be used in widely distributed data acquisition systems enabling test instruments to be placed close to test articles to maximize signal integrity.

Simplified Connectivity

The EMX-4250 can be used with the EMX-4016 16-channel break-out box which provides an easy and quick option to connect transducers using BNC connectors.

Software

Industry standard drivers and programming interfaces support all major programming environments. Complete turn-key solutions, such as open-source X-Modal III Modal Analysis Software and EXLab Data Acquisition software, are also available and supported.

More Product Information

VTI Instruments - SMX-4410 - high-density PXIe matrix module
  • Quad (4x10) or Dual (4x20) or Single (4x40) 2-wire configuration
  • Can be even configured as Dual (8x10) or Single (8x10)
  • Switch up to 300V, 2A - highest at this density in its class
  • Highest-performance matrix in its class - >30 MHz bandwidth, unmatched signal integrity
  • Extensive signal shielding employed on PCBs for excellent signal fidelity
  • Embedded Self-test mechanism that can be used to determine relay health.

VTI Instruments - EX1200-SMP4 High Density Switch Matrix Platform
  • 16 integrated analog backplane lines
  • 4-slot carrier plugs into a standard EX1208A series mainframe
  • Configure with either Resource or I/O matrix modules in any combination
  • 1 or 2 pole switching options, up to 300 V/2 A
  • Typical bandwidths in excess of 20 MHz
  • Integrate with optional 6.5 Digit DMM across backplane
  • Up to 176 x 8 2-wire configuration in 4-slots, 704 x 8 in a single 3u mainframe
  • Pre-program hardware triggers to automate relay states and reduce cycle time

Anritsu - MS2830A Microwave - Spectrum Analyzer/Signal Analyzer
  • 9 kHz to 26.5 GHz/43 GHz frequency range; 43 GHz max. built-in preamp option
  • Best-of-class wide dynamic range over 6 GHz
  • 325 GHz max. frequency range; built-in 1st local signal output for external mixer
  • For wideband down-converter; built-in 1 GHz IF output band
  • 10/31.25/62.5/125 MHz analysis bandwidth options (signal analyzer and modulation analysis functions)
  • Supports Noise Figure and BER measurement (options)
  • Measures 50 GHz to 75 GHz and 60 GHz to 90 GHz frequency ranges in combination with either High Performance Waveguide Mixer MA2806A or MA2808A set, respectively

Anritsu - MS2830A - Spectrum Analyzer/Signal Analyzer
  • Top-class spectrum analyzer measurement speed
  • Provides ±0.3dB (typ.) total level accuracy
  • Best-in-class dynamic range
  • Spectrum analyzer supporting built-in vector signal generator, analog signal generator, audio analyzer and modulation analysis (options)
  • Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE802.11a/11b/11g/11j/11n/11p/11ac and FM/ΦM/AM (with optional software)
  • Noise Figure, BER and Transmission Characteristics measurement (options)
  • Excellent eco-friendly product with low power consumption of 110 VA min.
Related Products: 26.5 GHz/43 GHz Models

Anritsu - MS2840A - Spectrum Analyzer/Signal Analyzer
  • Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option
  • Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer:
    • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)
    • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
    • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
  • Wide dynamic range measurement of either 50 GHz to 75 GHz, or 60 GHz to 90 GHz frequency bands using High Performance Waveguide Mixer MA2806A/MA2808A (with 26.5 GHz and 44.5 GHz models)
  • Measurements up to 325 GHz using External Mixer (Harmonic Mixer) MA2740C/MA2750C Series (with 26.5 GHz and 44.5 GHz models)
  • 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option)
  • All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)
  • Measurement applications (options): Phase Noise Measurement, Noise Figure Measurement, Vector and Analog Modulation Analysis, BER Measurement, Pulse Radar Measurement FunctionNEW
Related Solutions:

Anritsu - MS2850A - Spectrum Analyzer/Signal Analyzer
For next-generation broadband and multicarrier communication system, such as 5G mobile and broadcast satellites
  • Built-in 5G measurement software supports efficient development and production
    • All-in-one 5G NR/V5G (sub-6 GHz/mmWave) coverage
    • High EVM performance due to wide dynamic range (EVM: <1%)
    • One-button dynamic-range optimization at EVM measurement
    • Multicarrier batch (all-at-once) analysis
    • Amplitude/phase/timing difference measurement for each carrier
  • Maximum analysis bandwidth: 1 GHz
  • Excellent amplitude and phase flatness performance
  • Wide dynamic range measurement: >140 dB
  • Long-term capture using large memory
  • With PCIe/USB3.0 connector equipped
    • Transfers captured data to external PC at faster speed than 1000BASE-T

VTI Instruments - EMX-4251 8-Channel, 204.8 KSA/S Smart PXIE DSA Digitizer
  • 204.8 kSa/s/channel, 24-Bit ADC's, 8-Channel
  • Differential inputs deliver superior common mode performance
  • Flexible analog and user defined digital filter combinations
  • -105 dB SFDR
  • Seven auto-ranging input ranges from 100 mV to 10 V
  • Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response

VTI Instruments - EMX-1434 204.8 kSa/s Smart PXIe Arb. Waveform Source, with 2-Ch Tach and 4-Ch DIO
  • 4-Channel, 204.8 kSa/s/channel, 24-Bit DACs
  • -115 dB spurious free dynamic range
  • Integrated 2-Channel 64-bit tachometer
  • Integrated 4-Channel DIO
  • Tight synchronization with DSA analyzers
  • Ideal for rotational measurement, and stimulus-response applications such as vibration test
  • Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random