VTI Instruments - EMX-4350 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer

VTI Instruments - EMX-4350 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer
  • 625 kSa/s/channel, 24-Bit ADC, 4-Channel
  • True Differential, IEPE or Voltage, AD/DC Inputs
  • Flexible analog and user defined digital filter combinations
  • Best-in-class noise immunity
  • Highest quality instrumentation grade ADC’s outperform commonly used audio grade ADC’s
  • Best-in-class -125 dB SFDR
  • Unparalleled fully programmable excitation (2 mA to 20 mA)
  • Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response

More

  The EMX-4350 Smart Dynamic Signal Analyzer incorporates best-in-class analog design methodology to deliver industry leading measurement accuracy while offering scalability from a few channels to thousands of channels. This instrument is ideal for a wide range of applications including noise vibration, and harshness (NVH), machine condition monitoring, rotational analysis, acoustic test, modal test, as well as general purpose high speed digitization and signal analysis.

Superior Analog Performance

  • Measurement performance is elevated to new levels with 625 kSa/s/ch sample rates
  • True differential inputs with best-in-class CMRR of -120 dB reduces unwanted noise and interference
  • Industry leading SFDR of -125 dB offers exceptional measurement fidelity
  • IEPE excitation flexibility, fully programmable from 2 mA to 20 mA, to maximize transducer performance

Distributed Measurements

When combined with the EMX-2500 LXI interface, the EMX-4350 can be used in widely distributed data acquisition systems enabling test instruments to be placed close to test articles to maximize signal integrity.

Software

Industry standard drivers and programming interfaces support all major programming environments. Complete turn-key solutions, such as open-source X-Modal III Modal Analysis Software and EXLab Data Acquisition software, are also available and supported.

More Product Information

VTI Instruments - EMX-4251 8-Channel, 204.8 KSA/S Smart PXIE DSA Digitizer
  • 204.8 kSa/s/channel, 24-Bit ADC's, 8-Channel
  • Differential inputs deliver superior common mode performance
  • Flexible analog and user defined digital filter combinations
  • -105 dB SFDR
  • Seven auto-ranging input ranges from 100 mV to 10 V
  • Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response

NH Research - 4350 Series Modular DC Load 500V - Modular DC Load for Charger Testing, LED Driver Testing, Solar Panel Testing, & More!
  • 3 sizes – 150, 300, & 600W @ 500V with advanced measurement capability built-in
  • Mix & match loads for maximum configuration flexibility
  • Up to 16 loads in a single, 8 3/4″ / 5U Model 4300 chassis
  • Front loaded & front connections
  • 3 voltage and 3 current ranges for improved accuracy
  • High-resolution waveform capture for analysis of dynamic transients
  • Isolated digital inputs & outputs for test fixture support
  • PC/LAN control with LabVIEW & IVI drivers

VTI Instruments - EX1000A-TC 48-Channel Precision Thermocouple and Voltage Measurement Instruments
  • 48 thermocouple and voltage channels
  • Very high-performance thermocouple measurements, <0.3° C accuracy
  • Supports all thermocouple types
  • Built-in cold junction compensation, open transducer detection, self-test and self-calibration
  • Supports wide range of static measurements and transducer types including thermocouples, RTDs, thermistors, strain gauge, pressure transducers, etc. using EX10SC signal conditioning modules
  • Signal conditioning configurable on a per channel basis
  • Sampling rates up to 1000 Sa/sec/ch
  • Standalone, compact 1U footprint
  • LXI compliant with IEEE-1588 and wired trigger bus for distributed, synchronized measurements
  • Unlimited expansion for High-Channel counts

VTI Instruments - EMX-2500 Gigabit Ethernet LXI Controller for EMX Series PXIe Instruments
  • Industry's first gigabit Ethernet LXI Remote controller for PXI Express
  • Up to 100 MB/s sustained throughput
  • Allows remote access to VTI's SentinelEX PXIe instruments from anywhere in the world on any internet enabled device
  • Multi-chassis synchronization using precision IEEE-1588-2008 standard time source
  • Easy to set up for distributed data acquisition systems
  • Simplified instrument discovery and usage – just type in the IP address to connect to the instrument
  • IVI drivers supporting wide variety of Application Development Environments and Operating Systems
  • REST HTTP protocol for cloud support and advanced web applications

VTI Instruments - EMX-7512 64-CH, DIO LV TTL, Static I/O
  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

VTI Instruments - EMX-7511 64-CH, DIO TTL, Static I/O
  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

VTI Instruments - SMX-6144-SMB (1) 4X4 Coax Matrix
  • Non-blocking Configuration
  • Bandwidth > 2 GHz (configuration specific)
  • 250 VAC / 220 VDC
  • 2A Switching Current
  • Embedded Virtual Schematic
  • Relay Cycle Count Odometer

VTI Instruments - SMX-6115-SMB (2) 1X8 Coax Multiplexer
  • Non-Blocking Configuration
  • Bandwidth > 3.5 GHz (configuration specific)
  • 250 VAC / 220 VDC
  • 2A Switching Current
  • Embedded Virtual Schematic
  • Relay Cycle Count Odometer
  • High Density Single-Slot Implementations

VTI Instruments - SMX-6115 (2) 1X8 Coax Multiplexer
  • Non-Blocking Configuration
  • Bandwidth > 3.5 GHz (configuration specific)
  • 250 VAC / 220 VDC
  • 2A Switching Current
  • Embedded Virtual Schematic
  • Relay Cycle Count Odometer
  • High Density Single-Slot Implementations

VTI Instruments

AMETEK's VTI Instruments products and systems are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. The VTI Instruments brand is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.

VTI has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics. The Company’s products are used in applications ranging from wing test on Boeing 787 to production test for cell phones.

Contact Details

AMETEK Programmable Power, Inc. − San Diego

9250 Brown Deer Road

San Diego, CA 92121

Phone: 858-450-0085

Fax: 858-458-0267

Contact form or Email: sales.ppd@ametek.com for general inquiries

Mainframes
Model Description
CMX09 9-Slot 3U PXI Express Chassis, up to 8 GB/s
CMX18 18-Slot 3U PXI Express Chassis, up to 8 GB/s
CMX34 Integrated PXIe/LXI subsystem with receiver interface mechanism

Controllers
Model Description
EMX-2500 Gigabit Ethernet System Controller for PXIe Mainframes
EMX-2401 Intel Core i5 2.4 GHz, 8GB RAM, 160 GB hard drive, PXIe embedded controller
PXIe-PCIe8361 1 lane Gen 1 PCIe host w/3m copper cable, 200MB/s thru-put
PXIe-PCIe8381 PCI Express (x8 Gen 2) Control of PXI Express, 3.2 GB/s Practical Throughput
PXIe-PCIe8388 PCI Express (x16 Gen 2) Control of PXI Express, 5.6 GB/s Practical Throughput
PXIe-6674T PXI Express Timing and multichassis synchronization module

Digitizers
Model Description
EMX-4350 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer
EMX-4380 625 kSa/s DSA Instr., 4 Ind. Diff. Ch., 24-bit Digitizer, w/ charge inputs
EMX-4250 204.8 kSa/s DSA Instr., 16 Ind. Ch., 24-bit Digitizer
EMX-4251 204.8 kSa/s DSA Instr., 8 Ind. Ch, 24-bit Digitizer
EMX-4016 16 channel, rackmount breakout box for use with EMX-4250
EMX-4008 8 channel breakout box for use with EMX-4251
PXI-2005 4-CH, 500KS/s Simultaneous A/D Multi-function PXI-H Module
PXI-2010 4-CH, 2MS/s Simultaneous A/D Multi-function PXI-H Module
PXI-2022 16-CH 16-Bit 250 KS/s Simultaneous Sampling, PXI-H Module
PXI-2204 64-CH, 3MS/s 12-bit Multi-function PXI-H Module
PXI-2205 64-CH, 500KS/s 16-bit Multi-function PXI-H Module
PXI-9846D High Resolution PXI-H Digitizer, 4CH 16-bit 40MS/s with 512MB SDRAM
PXIe-9848 8-CH 14-Bit 100MS/s High Speed PXI Express Digitizer

Switch Cards
Model Description
SMX-2002 10 channel, 16 A SPDT switch
SMX-3276 152 channel, 300 V/2A Multiplexer
SMX-4410 160 crosspoint, four (4x10)s, 300V/2A Matrix
SMX-5001 80 ch 300 V/2 A SPST switch
SMX-6301 Four SP4T multiplexer tree, 3 GHz
SMX-6301T Four SP4T multiplexer tree, 3 GHz w/ 50ohm Termination
SMX-7121 1-slot microwave switch, single SPDT, 26.5 GHz
SMX-7122 1-slot microwave switch, dual SPDT, 26.5 GHz
SMX-7200 Pass through adapter, 6 drive lines

Waveform Generators
Model Description
EMX-1434 204.8 kSa/s Arb. Waveform Source, 4 Ind. Ch., Integr. Tach.
PXI-2502 8-CH, 1MS/s analog output multi-function PXI-H Module

DMM
Model Description
M9183A PXI-H Digital Multimeter, 6½ digit, Enhanced Performance

Communication Buses
Model Description
PXI-C429-4 4 Channel ARINC-429 on PXI-H
PXI-C429-8 8 Channel ARINC-429 on PXI-H
PXI-C429-16 16 Channel ARINC-429 on PXI-H
PXI-C429-32 32 Channel ARINC-429 on PXI-H
PXI-C1553-1 Single 1553 Channel on C-size PXI-H
PXI-C1553-2 Dual 1553 Channel on C-size PXI-H
PXI-C1553-4 Quad 1553 Channel on C-size PXI-H

Line Cards: