VTI Instruments - EX1200-7500 64 -Channel, 2 MHz, Digital I/O
-
Eight ports of 8 I/O bits each
-
High current capability for control of external relays, 300 mA sink
-
Simulate and receive digital data at up to 2 MHz sample rates
-
Selectable output voltages range from 3.3 V to 60 V
-
Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
The EX1200-7500 is a high-performance I/O module with eight 8-bit ports (64 channels). Each port may be configured as an input or output under program control. The I/O may be single buffered, to provide real time data access, or double buffered, to provide synchronized data.
The EX1200-7500 has the flexibility to source the input and output clocks from the front panel allowing very large numbers of channels to be synchronized to collect or present data to a UUT. Additionally, input data can be timestamped to IEEE-1588 precision as part of the EX1200 scan engine. Deep on board memory (up to 1 MB) can be used to generate patterns on output channels at rates up to 2 MHz. In order to ease overall system cabling, all clamping diodes and open collector channels can be pulled up internally, rather than on a per channel basis.
Each channel can sink 300 mA, and includes built-in clamping diodes making this module ideal for driving and sensing external devices such as relays.
More Product Information
-
Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing IEC test systems which provide only limited throughput using IEEE-488.
-
PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
-
Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
-
Simple user operation under Windows provides IEC test setup, data analysis, display and MS Word test reports.
-
High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of actual test.
-
Single Step and Fast playback mode of test results
-
High Power AC Source
-
Programmable AC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 30, 45, 75 and 90 kVA per unit and multi-unit configurations for power requirements up to 180 kVA and above
-
-
Remote Control
-
Standard RS232, USB and IEEE-488 (GPIB) and optional LAN interfaces are available for automated test applications.
-
-
High-density, compact (1U) precision data acquisition instruments
-
LXI™ LAN connectivity
-
Fully integrated signal conditioning maximizes performance and accuracy
-
Easily integrate thermocouples, voltages, RTDs, thermistors, frequency, strain and pressure on an per-channel basis
-
Distributed, synchronized measurements over the wire
-
Scalable architecture easily expands from tens to thousands of channels
-
DC version available for test cells requiring closer proximity to test article
-
End-to-end self-calibration ensures optimum runtime performance
-
Web-based access for monitoring and control
-
Exlab turnkey software for simplified setup, control and data display
-
Highest resolution – 12 bits all the time
-
More capability – integrates multiple instruments into one
-
Comprehensive probe support – supports over 30 probes in 9 categories
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
96 digital lines configurable as either input or output
-
Five available power supply rails for custom designs
-
Mix and match with standard SMIP switching and digital I/O modules to create high density configurations
-
VXIplug&play driver simplifies software development
-
On-board connector header for simplifed migration to PCB implementation
-
Access to 16 MHz clock for use in complex designs
-
Multiple front panel connector options
-
High Current - 300 mA Sink
-
High Density - 64 Channels / Card
-
Isolation - 1000 V
-
Multiple Digital Logic Levels - LV TTL - TTL - 60 V Max, User Defined
-
Flexible Configurations - Dedicated Input - Dedicated Output - Eight, 8-Bit Ports
-
Flexible Software - Embedded Soft Front Panel - Common IVI Software Drivers
-
Up to 10 kM distance from PC to mainframe through fiberoptic interface
-
40 MB/s block transfer rates
-
Embedded Web Interface provides interactive utility to control instruments
-
Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
-
Backward compatibility with VXI 1.4 and 2.0 products
-
External Clock In/Out with on-board options for TCXO/OCXO
-
VXI plug&play compliant
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries