VTI Instruments - EX1200-7500 64 -Channel, 2 MHz, Digital I/O
-
Eight ports of 8 I/O bits each
-
High current capability for control of external relays, 300 mA sink
-
Simulate and receive digital data at up to 2 MHz sample rates
-
Selectable output voltages range from 3.3 V to 60 V
-
Setup outputs and scan inputs as part of EX1200 measurement sequencing engine
The EX1200-7500 is a high-performance I/O module with eight 8-bit ports (64 channels). Each port may be configured as an input or output under program control. The I/O may be single buffered, to provide real time data access, or double buffered, to provide synchronized data.
The EX1200-7500 has the flexibility to source the input and output clocks from the front panel allowing very large numbers of channels to be synchronized to collect or present data to a UUT. Additionally, input data can be timestamped to IEEE-1588 precision as part of the EX1200 scan engine. Deep on board memory (up to 1 MB) can be used to generate patterns on output channels at rates up to 2 MHz. In order to ease overall system cabling, all clamping diodes and open collector channels can be pulled up internally, rather than on a per channel basis.
Each channel can sink 300 mA, and includes built-in clamping diodes making this module ideal for driving and sensing external devices such as relays.
More Product Information
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
-
Typical accuracies of ±0.20°C
-
16-channel isolated universalt hermocouple/voltage inputs
-
Power over Ethernet+ (PoE+)
-
20K samples/second/channel sample rate
-
24-bit ADC per channel
-
500 V channel-ground isolation
-
1000 V channel-channel isolation
-
Data logger acquisition mode
-
Built-in parallel data streaming
-
Full-featured embedded web interface
-
LXI Ethernet interface
-
8-bit bank isolated digital I/O
-
Compact 1U half-rack form factor
-
Up to 96 differential channels per full rack mainframe
-
Constantly monitor input signals for fault conditions
-
Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
-
Inputs can be masked, inverted, and combined to produce interrupts
-
Can be used as a time stamp module and as a digital I/O
-
Programmable debounce circuitry prevents erroneous readings
-
10 V and 100 V input ranges
-
On-board memory stores events with IEEE 1588 timestamps
-
Synchronize reading of input states with other scanned analog channels
-
Automatic calibration of instruments
-
In line with ISO17025 and other metrology standards
-
Automated optical readout module for multimeters
-
Unlimited custom instruments and procedures
-
The EX1200-7500 is a 64 -Channel, 2 MHz, Digital I/O with Eight ports of 8 I/O bits each
-
Multi-mode AC Electronic Load
-
Flexible solution for a wide range of AC power test applications
-
-
3000 Watt Power Dissipation
-
Master / Auxiliary configurations for higher power and multi phase applications
-
-
50 to 350 V, 45 Hz to 440 Hz
-
Commercial, Military and Avionics applications
-
-
Programmable Crest & Power Factor
-
Test AC power products for real-world conditions
-
-
Built-in Measurements
-
Eliminates the need for additional test equipment in bench or ATE applications
-
-
Remote Control
-
IEEE-488 and RS232C Interface for automated test applications
-
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries