VTI Instruments - SMX-2002 (Power) 10 channel, 16 A current SPDT switch
-
Large switching capacity in a small footprint
-
Switch up to 16 A current - highest in its class
-
High breakdown voltage (1,000 V rms between open contacts)
-
Ideal for applications such as high current/high power switching, AC line power switching, driving relays for industrial machinery, solenoid switching, and automotive engine control
-
Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
The SMX-2002 is the only switch module in its class with the ability to switch up to 16A. Some applications include: AC line power switching, switching of DC or AC power supplies, control or driving relays for industrial machines (robotics, numerical control machines), automotive engine control, and solenoid switching. Since this module typically switches power to the UUT or interface, the SMX-2002 includes failsafe pins on the front panel which can be configured to open all relays when a failsafe signal is activated. This approach can instantly removes all power to the UUT or interface.
More Product Information
-
Multi-mode AC Electronic Load
-
Flexible solution for a wide range of AC power test applications
-
-
3000 Watt Power Dissipation
-
Master / Auxiliary configurations for higher power and multi phase applications
-
-
50 to 350 V, 45 Hz to 440 Hz
-
Commercial, Military and Avionics applications
-
-
Programmable Crest & Power Factor
-
Test AC power products for real-world conditions
-
-
Built-in Measurements
-
Eliminates the need for additional test equipment in bench or ATE applications
-
-
Remote Control
-
IEEE-488 and RS232C Interface for automated test applications
-
-
High Power AC Source
-
Programmable AC power for frequency conversion and product test applications
-
-
Expandable Power Levels
-
Available output power of 30, 45, 75 and 90 kVA per unit and multi-unit configurations for power requirements up to 180 kVA and above
-
-
Remote Control
-
Standard RS232, USB and IEEE-488 (GPIB) and optional LAN interfaces are available for automated test applications.
-
-
Precision Current Source : Ideally suited for current protection device testing
-
Single and Three Phase Modes : Built-in phase mode switch makes output configuration easy
-
3kVA to 18kVA Power Levels : Match power source & cost to application requirements
-
Arbitrary Waveform Generator : Test products using real world current profiles including harmonic currents
-
Built-In Power Analyzer : Performs voltage & current harmonic analysis & waveform acquisition
-
Standard IEEE-448, USB and RS232C : Remote control interface for ATE system integration
-
GUI Software Suite: Allows users to access the powerful features & functions of the instrument on a Windows™ system
-
Programmable Transients : Amplitude & time control with up to 1ms resolution
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
4-Channel, 204.8 Ksa/s per channel, 24-Bit DACs
-
-115 dB spurious free dynamic range
-
Integrated 2-Channel 64-bit tachometer
-
Integrated 4-Channel DIO
-
Tight synchronization with DSA analyzers
-
Ideal for rotational measurement, and stimulus-response applications such as vibration test
-
Output modes including Sine, Burst Sine, Chirp, Burst-random and continuous random
-
Highest resolution – 12 bits all the time
-
More capability – integrates multiple instruments into one
-
Comprehensive probe support – supports over 30 probes in 9 categories
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Up to 10 kM distance from PC to mainframe through fiberoptic interface
-
40 MB/s block transfer rates
-
Embedded Web Interface provides interactive utility to control instruments
-
Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
-
Backward compatibility with VXI 1.4 and 2.0 products
-
External Clock In/Out with on-board options for TCXO/OCXO
-
VXI plug&play compliant
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries