Yokogawa - FG400 Isolated Arbitrary/Function Generator

Basic Waveforms:

 
Screen Shot 2014 04 04 At 1.15.00 PM 1

Advanced Functions:

Screen Shot 2014 04 04 At 1.16.54 PM

Input/Output Terminal:

Screen Shot 2014 04 04 At 1.19.24 PM 1

More Product Information

Yokogawa - 701947 Isolated Probe 1000V / 200 MHz
Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe' 'Iso-Probe'. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. Not for use with CAT III or CAT IV measurements

Yokogawa - 702902 Isolated Passive Probe 1000V / 60 MHz
  • Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m, 'Isolated Probe' 'Iso-Probe'.
  • For use with 701250, 701251, 701267, 701280, 701281, 720210 isolated-input modules ONLY.
  • Not for use with CAT III or CAT IV measurements

Yokogawa - 700929 Isolated Passive Probe 1000V / 100 MHz
Passive Probe, 1000Vp CAT2, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Safety Iso-Probe. For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY. For use with DL850 series, DL750/DL750P, SL1400, and SL1000. (This is the "new style" 700929 Iso-Probe for ScopeCorder.)

Yokogawa - 700987 Logic Probe for the DL750 -  Isolated Inputs
  • 8-bit, isolated, response speed: 1ms or less (DC), 20ms or less (AC), treshold level 6VDC or 50VAC.
  • To be used with measurement lead 758917 and 758922, 758929 or 701954 adapter leads.

VTI Instruments - EMX-7515 64 DI, 60 V MAX, Isolated Static I/O
  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

VTI Instruments - EMX-7514 64 DO, Source/Sink, 60 V MAX, Isolated Static I/O
  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

VTI Instruments - EMX-7513 32DI/32DO, Source/Sink, 60 V MAX, Isolated Static I/O
  • Static digital input/output
  • 64 channels total (8 ports of 8 bits each), bidirectional
  • High current (300 mA), on each channel
  • Voltage inputs and outputs from 2 V to 60 V on each channel
  • Embedded soft front panel interface
  • Common IVI software drivers available
  • Multiple digital logic levels: LV TTL, TTL
  • Optical isolation at 1000 V

VTI Instruments - EX1401 16-Channel Isolated Thermocouple and Voltage Measurement Instrument
  •  Typical accuracies of ±0.20°C
  • 16-channel isolated universalt hermocouple/voltage inputs
  • Power over Ethernet (PoE)
  • 20K samples/second/channel sample rate
  • 24-bit ADC per channel
  • 500 V channel-ground isolation
  • 1000 V channel-channel isolation
  • Data logger acquisition mode
  • Built-in parallel data streaming
  • Full-featured embedded web interface
  • LXI Ethernet interface
  • 8-bit bank isolated digital I/O
  • Compact 1U half-rack form factor

Teledyne LeCroy - HVFO High Voltage Fiber Optically-isolated Probe
  • Applications
  • Upper-side gate drive signal measurements
  • Floating control signal or sensor voltage measurements
  • EMC, EFT, ESD, and RF immunity testing and system optimization
  • Any small signal measurements with high common-mode voltage
  • 60 MHz bandwidth
  • 35 kV common-mode voltage rating (fiber optic isolation)
  • Superior Noise and Rejection
    • 140 dB CMRR
    • Low loop inductance
    • Low attenuation
  • Reduced DUT loading, better pulse response compared to conventional HV differential probes
  • Selectable tips from ±1V to ±40V
  • Eliminates need to “float” the oscilloscope
  • ProBus-compatible with many Teledyne LeCroy oscilloscopes