Product Finder

Displaying 1 - 15 of 36
Product Results:
Teledyne LeCroy - AP033 500 MHz Active Differential Probe

Teledyne LeCroy - AP033 500 MHz Active Differential Probe

Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel...
Teledyne LeCroy - Current Probes

Teledyne LeCroy - Current Probes

Easy to Use No need to break the circuit or insert a shunt Small form factors for use on crowded boards...
Teledyne LeCroy - DA1855A High-performance 100 MHz Differential Amplifier

Teledyne LeCroy - DA1855A High-performance 100 MHz Differential Amplifier

Full control from oscilloscope through ProBus interface Dc to 100 MHz bandwidth Outstanding 100,000: 1 Common Mode Rejection Ratio (CMRR...
Teledyne LeCroy - Differential Probes (<= 1.5 GHz)

Teledyne LeCroy - Differential Probes (<= 1.5 GHz)

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference...
Teledyne LeCroy - High Voltage Differential Probes

Teledyne LeCroy - High Voltage Differential Probes

High voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The...
Teledyne LeCroy - High Voltage Passive Probes

Teledyne LeCroy - High Voltage Passive Probes

High voltage probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are several fixed-attenuation probes covering a...
Teledyne LeCroy - HVD3102 1kV, 25 MHz High Voltage Differential Probe

Teledyne LeCroy - HVD3102 1kV, 25 MHz High Voltage Differential Probe

1 kV CAT safety rated Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High...
Teledyne LeCroy - HVD3102-NOACC 1kV, 25 MHz High Voltage Differential Probe without tip Accessories

Teledyne LeCroy - HVD3102-NOACC 1kV, 25 MHz High Voltage Differential Probe without tip Accessories

1 kV CAT safety rated Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High...
Teledyne LeCroy - HVD3106 1kV, 120 MHz High Voltage Differential Probe

Teledyne LeCroy - HVD3106 1kV, 120 MHz High Voltage Differential Probe

1 kV CAT safety rated Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High offset capability at...
Teledyne LeCroy - HVD3106-6M 1kV, 80 MHz High Voltage Differential Probe with 6m cable

Teledyne LeCroy - HVD3106-6M 1kV, 80 MHz High Voltage Differential Probe with 6m cable

1 kV CAT safety rated Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High offset capability at...
Teledyne LeCroy - HVD3106-NOACC 1kV, 120 MHz High Voltage Differential Probe without tip Accessories

Teledyne LeCroy - HVD3106-NOACC 1kV, 120 MHz High Voltage Differential Probe without tip Accessories

1 kV CAT safety rated Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High...
Teledyne LeCroy - HVD3206 2kV, 120 MHz High Voltage Differential Probe

Teledyne LeCroy - HVD3206 2kV, 120 MHz High Voltage Differential Probe

2 kV CAT safety rated Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015 Exceptional common-mode rejection ratio (CMRR) across a broad...
Teledyne LeCroy - HVD3206-6M 2kV, 80 MHz High Voltage Differential Probe with 6m cable

Teledyne LeCroy - HVD3206-6M 2kV, 80 MHz High Voltage Differential Probe with 6m cable

2 kV CAT safety rated Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015 Exceptional common-mode rejection ratio (CMRR) across a broad...
Teledyne LeCroy - HVD3605 6kV, 100 MHz High Voltage Differential Probe

Teledyne LeCroy - HVD3605 6kV, 100 MHz High Voltage Differential Probe

6 kV CAT safety rated Widest differential voltage range available Exceptional common-mode rejection ratio (CMRR) across a broad frequency range...
Teledyne LeCroy - HVFO High Voltage Fiber Optically-isolated Probe

Teledyne LeCroy - HVFO High Voltage Fiber Optically-isolated Probe

Applications Upper-side gate drive signal measurements Floating control signal or sensor voltage measurements EMC, EFT, ESD,...

Pages


  • Designed for schools,university and laboratories
  • Designed for industry and system applications
  • Designed for workshop and development
  • Adjustable insulated transformer
  • Output voltages: 0...260 V AC und 0...32 V DC
  • Auxiliary output voltages:
  • 3 V / 12 V / 18 V / 24 V / 230 V AC
  • Output currents: 2 A, 3 A, 4,5 A und 0...5 A
  • Three-digit displays for voltage and current
  • Case closed on top and bottom
  • Safety output sockets
  • 100% duty cycle
  • Safety EN 61010, EN 60950 and EMI EN 61326


Large product variety. Extended performance range. Powerful and efficient.
  • Over 180 DC power supplies and electronic loads: programmable, bidirectional, regenerative
  • Extended power ranges: From 600 W up to 30 kW programmable output power, from 6 A up to 1000 A output current, and from 10 V up to 2000 V output voltage
  • Energy recovery greater than 96 % efficiency
  • Safe parallel connection of up to 64 devices in the EA-Power Racks producing up to 1.92 MW
  • Efficient applications test with true autoranging and integrated function generator
  • Easy handling with uniform devices and many interfaces to PCs and PLCs


EA-PS 800 19“ 80 W - 240 W
  • Wide input voltage range 90...264 V with active PFC
  • High efficiency up to 92%
  • Output power ratings: 58 W up to 240 W
  • Output voltages: 3.3 V up to 24 V
  • Output currents: 2.5 A up to 30 A
  • Single, double or triple output
  • Power limited, all outputs for full power
  • All outputs separately adjustable and regulated
  • Overtemperature protection (OT)
  • Remote on/off and power fail signal
  • Remote sensing
  • Options
  • Power sharing* between mains outputs
  • Without front plate


EA Programmable DC Power Supplies

  • Autoranging
  • Color Touchscreen
  • IF- Plug’n play interface-slot

Space Saving Instruments in Desktop Style (Series PS and PSI)

  • Autoranging
  • Color Touchscreen
  • 3-paths on board Interface

Space Saving Instruments in Tower style

  • Autoranging
  • Colored Touchscreen
  • IF KE Slot

EA-PS 500 150 W - 300 W
  • Wide input voltage range 90...264 V with active PFC
  • Output powers: 150 W up to 300 W
  • Output voltages: 12 V, 24 V, 42 V and 48 V
  • Output currents: 5.2 A up to 21 A
  • Output voltage adjustable
  • Remote sensing input
  • Overload- and short-circuit-proof
  • Overtemperature protection (OT)
  • Desk and wall mounting versions
  • Desk units with 4 mm sockets (type T)
  • Wall units with screw terminals (type R)