2 kV CAT safety rated Only 1500 Vdc safety rated probe per IEC/EN 61010-031:2015 Exceptional common-mode rejection ratio (CMRR) across a broad frequency range

6 kV CAT safety rated Widest differential voltage range available Exceptional common-mode rejection ratio (CMRR) across a broad frequency range

Applications Upper-side gate drive signal measurements Floating control signal or sensor voltage measurements EMC, EFT, ESD, and RF immunity testing and system optimization

400 MHz probe bandwidth 900 ps rise time 1000 Vrms maximum input Up to 6 kV transient overvoltage

Teledyne LeCroy's wide-band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. Their broad wavelength range and multi-mode input optics make these devices ideal for applications including Ethernet, Fibre Channel, and ITU telecom standards. Available to support optical data rates up to 11.3 Gb/s with reference receivers, or slightly higher without reference receivers.

Compact probe head Supports fine pitch SMD probing Rugged, Sharp tip HF optimized connection accessories Over 30 accessories

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing ÷10/÷100 attenuation for voltage inputs up to 1.2 kV.

Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope Automatic probe detection Provides all necessary power and offset control to the attached probe Supports probes up to 4 GHz