• Dual Voltage ranges that support over-voltage testing on 480V-based systems 
• Separate terminal blocks for single-phase and three-phase AC power supply outputs 
• High Power AC and DC Source 
• Auto paralleling for higher power system expansion 
• Single and three-phase modes 
• Arbitrary & Harmonic Waveform Generation 
• Standard LXI LAN, USB, and RS-232, Optional GPIB 
• Step, list, and pulse voltage transients with down to 500usec resolution 
• Complete avionics power quality test suites 
• 15kVA to 1MVA Power Levels 
• Intuitive 5” color display for ease of navigation 
• Internationally accepted test routines for EMI/EMC, Safety Compliance

Not all amplifiers are created equal, so how can you be certain that an amplifier will work for your needs? You deserve to be confident that the amplifiers used with your test-and measurement lab benches will meet the requirements of your specific applications, are reliable, and are equally well-supported pre-and post-sale. When it comes to application expertise, reliability and support, there is no company that does it better than Maury.

• Easy to Use
  • No need to break the circuit or insert a shunt
  • Small form factors for use on crowded boards
• Variety of Applications
  • Bandwidths up to 100 MHz
  • Peak currents up to 700 A
  • Sensitivities down to 1mA/div
• High Precision Measurements
  • Low frequency accuracy of 1%
  • Integrated autozero capability
• Fully Integrated with Teledyne LeCroy Oscilloscope
  • No additonal hardware is required
  • Power is supplied from oscilloscope ProBus connection
  • Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
  • Degauss and Autozero directly from oscilloscope user interface
• DCS025 Deskew Calibration Source
  • Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes

• High ENR
• Wide frequency range
• Custom frequencies available

The NC3600 Series coaxial noise sources are an excellent choice for applications requiring high ENR, such as ATE, radiometer, and radar systems.

An SMA male connector is standard for the RF output and feed thrus for bias input. SMA female is an option. Custom frequencies and flatness available. Contact the factory with your request.

• Energy absorber with a rating of 400VDC at ±150A 
• Provides up to 400V at 150A for 60kW of output power
• Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak

The new Light Hub for Zebra Iris GTX Smart Cameras (HCS-150-ZEB) streamlines machine vision system setup. This innovative controller acts as a central hub, directly powering your Zebra Iris GTX Smart Camera while managing triggering and analog dimming control between the camera, compatible lights, and I/O accessories.

Equipped with Advanced Illumination’s SignaTech™ technology, the Light Hub delivers 4 amps of continuous output and up to 8 amps of overdrive strobe. This empowers you to choose from a vast array of Advanced Illumination lighting configurations, ensuring optimal illumination for your application. Whether you need seamless integration with an 3×3 infrared backlight or would like to overdrive strobe a 70″ high intensity bar light, the Light Hub delivers.

PureLine 3 Technology

• Provides an effectively noise free environment around the device under test (DUT)
• First automated probe station to achieve -190dB spectral noise*
• Up to 32x lower noise (1kHz), for improved device characterization and modelling at the 7/5/2 nm technology nodes targeted for 5G and beyond applications
• Eliminates over 97% of the environmental noise experienced in previous probe systems
• Extensive collection of FormFactor patents, electrical design knowledge, and measurement system IP

Plug In and Go

• World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
• Eliminates all ground-loop induced TestCell noise
• Low field emissions
• Provides fully managed and filtered AC power to the entire system, prober and instruments

See "Specifications & Details" tab for more key features

• Universal input switching supply 
• 24v regulated current DC – runs on 110-220v AC 
• Power indicator light 
• Tinned leads; marked negative/positive with wire nuts for easy connection