Absolute EMC - LISN, ISN, CDN, CDNE, & Clamps
See "Specifications & Details" tab for more information.
|
Absolute EMC offers an assortment of injection test kits for the use of conducted immunity. The kits can be used with many available conducted immunity systems, including the Schlöder CDG 7000, to make selection and setup easy. All calibration fixtures, injection clamps, attenuators, and termination resistors necessary for meeting the requirements of conducted immunity systems. All all-in-one systems are covered. |
More Product Information
- All-in-one smart module: no separate electronics
- Runs directly from USB adapter
- USB, I2C or SPI interface
- Small size: less than 29 x 20 x 10 mm
- High resolution: 0.5 μm
- Absolute encoding: no homing
- Long stroke: 6 mm
- Low power use: 3.3 V DC input, < 0.75 W when moving
- High repeatability and low runout
- A real-time diagnostic tool supports EMC/EMI debugging.
- Fast visualize EMC/EMI problems.
- Enables easy comparison of countermeasures before and after.
- Capable of measurement from entire products to single components.
- Factor-editor function provides correction of antenna characteristics, cable loss and preamplifier.
- User friendly compact design.
- Customer supplied spectrum and probes acceptable (Please consult)
- Smart Stage: Embedded controller, no separate electronics
- Operate directly using I2C or SPI ASCII commands -or-
- Evaluate with Pathway™ PC Software and USB adapter
- Cost-effective, long-life: For high-volume production
- Small size: 32 x 32 x 10 mm
- High resolution: 0.5 μm with absolute encoding
- High speed: 35 mm/s
- Long stroke: 8 mm
- Power: 5 V DC input, ~ 3.2 W peak when moving
- High repeatability: (± 2 μm typical)
- Automated Absolute and Additive (Residual) Measurements
- Real Time Cross Correlation
- Only analyzer available that allows actual noise floor measurement
- Unparalleled analog performance
- Repeatable data
The HA7162D Real Time Phase Noise Analyzer delivers proven accuracy, high reliability, automation and flexibility. The real time engine covers the full measurement bandwidth with extremely fast measurement speeds to reduce product development time and optimizes ATE manufacturing throughput.
- High Current 4 path LISN (3-Phase & Single-Phase)
- Line Impedance Stabilization Network
- Connector: CEE plug (IEC 60309) & CEE 7/4
- 9 kHz to 30 MHz
- 250/400 VAC, 400 VDC, 32 A (16A for CEE 7/4)
- (50 µH+5 Ω) || 50 Ω
- CISPR 16-1-2
- Smallest rotary stage: 11.75 x 21.9 x 16 mm
- Embedded closed-loop controller
- No separate electronics needed
- 3.3 VDC input
- Accepts direct motion commands (I2C, SPI, or UART)
- Continuous 360° rotary motion
- Angular resolution ~21.9727 mdeg closed loop
- Built-in absolute position sensor
- Millisecond step and settle times
- 0.5 deg in 16 ms closed loop
- 0.5 deg in 1.2 ms open loop
- Holds position with zero power and no jitter
Absolute EMC
Website
Absolute EMC LLC is a premier North American provider of electromagnetic compatibility (EMC) expertise and test equipment. They deliver end to end consulting—covering IEC, MIL STD, CISPR, and automotive standards—hands on training for all EMC and RF test instruments, and turnkey test system design and integration. Leveraging decades of experience with every major manufacturer and the latest technologies, they also offer strategic guidance on equipment selection, market trends, and procurement to help you maximize the performance and ROI of your EMC investments.
