The MVG-Orbit/FR performance series has recently been expanded to include the AL-428X series of medium-duty, two axes positioners. Thanks to their low profile design and advanced drive mechanism, these symmetrical EL/AZ positioners ensure accurate, balanced rotation, and controllable velocity. 

Their rugged and straightforward construction ensures maximum reliability and trouble-free operation, yielding the best size and weight / performance ratio. This series includes a counter weight option which improves overall system stability and accuracy while allowing for higher DUT loads.

Typically, the unit includes the main body, precise slew bearings, DC motors, gear reducers, encoder and limit switch assemblies. The antenna interface mounting plate surface is designed with a threaded mounting hole pattern for ease of use. A large variety of options is available for this ORBIT/FR standard product family. See the Options pages in the Positioners Overview or on the website for slip rings, rotary joints, high precision encoders, speed options and more.

Flexibility

• DC, AC and RF/microwave device characterization, 1/f, WLR, FA and design debug
• Full thermal range of -60°C to +300°C
• Compatible with TopHat or IceShield
• Usage of manual and motorized positioners, probe cards within EMI-shielded environment
• Upgrade path to meet your future needs
• Stable and repeatable measurements over a wide thermal range

High accuracy and repeatability

• Reliable and repeatable contact
• Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
• Advanced EMI-shielding with PureLine and AttoGuard technologies available
• Superior low-leakage and low-noise measurements
• Safe and accurate hands-off testing
• Minimizes settling times for efficient measurements over full thermal range

See "Specifications & Details" tab for more key features

The MVG-Orbit/FR performance series has recently been expanded to include medium-duty, dual-axes positioners: the new AL-438X series. Thanks to their low profile design and advanced drive mechanism, these symmetrical AZ/EL positioners ensure accurate, balanced rotation, and

Their rugged yet straight-forward construction ensures maximum reliability and trouble-free operation, yielding the best size and weight / performance ratio. This particular series provides a counter weight option which improves overall system stability and accuracy while allowing for higher DUT loads. A large variety of options is available for this ORBIT/FR standard product family.

• The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary. 
• Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width. 
• The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate. 
• All ICS models employ reverse input polarity protection. 
• Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time. 
• A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached. 
• 0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.

• The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
• PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
• Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
• Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
• High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
• Single Step and Fast playback mode of test results.

Acquire high quality images with accurate radiometry for LEO (Low Earth Observation) earth observation applications with 65 MP focal plane and control electronics. From a 500 km orbit, SEEING™ 230 Ident has 9 x 6 km2 swath, offering a 1.03m native Ground Sample Distance (GSD), and features a super-resolution optional mode providing 70cm GSD. Thanks to its unique design, SEEING™ 230 Ident has an ultra-low SWaP factor. It is made of advanced ceramic material for strength during launch and stability during operation in space. It is athermalized and gradient insensitive between -10°C to +50°C. It has a low mass, below 8kg, saving both platform and launch costs.

• Comprehensive Test Solutions - Our CTS 4.0 Series offers complete test solutions for emissions and immunity compliance testing of AC and DC power products, ensuring your products are ready for global markets.
• Single & Three Phase Operation - Offers flexibility
• Direct PC Bus Access - Provides high sampling rate and resolution for accurate measurements and high-speed data transfers
• PC-Based Harmonic & Flicker Testing - Provides real-time full-color data display updates and continuous PASS/FAIL monitoring
• Supports Global Standards - Supports European and Japanese standards
• Easy To Use Interface - Provides IEC test setup, data analysis, display, MS Word test reports, and data files generated in MS Excel format
• High Resolution - Data storage to disk for post-acquisition analysis and reporting
• Single Step - Single Step and Fast Forward replay of recorded test data at 200 mSec

• The Small Dome Light is available in a wide range of wavelengths including a 3 channel, RGB configuration. 
• Rugged, cast aluminum housing has an outer diameter of 5.25” (133.3mm) and an inner, working diameter of 3.1” (78.7mm). 
• Provides up to 79kLux at a 1” (25mm) standoff.

• High Intensity: up to 9x brighter than the existing SL191 Pattern Projecting Spot Light and more than 3x brighter than the leading competitive structured light projector. 
• Projection patterns are easily configured with available reticles, including line, grid, cross, multiple lines, and half sphere, with custom reticles available. 
• Customizable: available in multiple wavelengths, including white. 
• Constructed with a large heat sink for improved LED thermal management to facilitate increased brightness while maintaining safe operating temperatures. 
• Ideal solution for machine vision inspection applications requiring structured illumination, including edge detection, locating offsets, and assessing topography. 
• Requires a reticle and lens (sold separately); see available reticles here.