• The Narrow Linear Diffuse Light series is ideal for precision scanning of highly reflective materials. 
• The DL151 is available in a wide range of wavelengths and provides up to 28kLux at a 1” (25mm) standoff. 
• The extruded aluminum enclosure can be expanded in 2″ (51mm) increments from 2″ to 70″ (1778mm).

• Guaranteed performance to 43.5 GHz with Extended K™ ports
• High output power allows measurement of high attenuation devices
• Wide dynamic range enables measurement of very low reflection artifacts
• Excellent corrected directivity minimizes measurement uncertainty
• SmartCal™ auto calibration unit reduces calibration and setup time
• Time domain with time gating option grants easier and faster fault identification
• Modern LAN interface for remote control is faster than GPIB
• A common GUI and SCPI interface within the ShockLine family
• Bias tee option simplifies test setups where the DUT needs DC biasing
• Universal Fixture Extraction (UFX) software option provides advanced de-embedding tools for test fixture extraction
• E-Band VNA
  • Extended frequency range covering E-band and major parts of V band
  • Fully assembled test system eliminates setup errors and increases reliability
  • Tethered modules connect directly to the DUT increasing measurement stability

• 8 Independent Channels, 2 Output Connectors 
• Includes built-in pre-programmed sequencing. 
• Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color. 
• Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited. 
• Housed within a compact enclosure with DIN rail mounting. 
• Driven with SignaTech™ for improved safety and easy operation. 

NOTE: NOT COMPATIBLE WITH C1 CONNECTORS

• The Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high-speed data transfers.
• PC-based Harmonic and Flicker test software provides real-time full-color data display updates and continuous PASS/FAIL monitoring.
• Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
• Intuitive operating software provides IEC test setup, data analysis, display, with test reports in and MS Word format.
• High resolution, no gap acquisition data storage to ensure that all data can be streamed to disk (in ASCII format if needed) for later review and replay of the actual test.
• Single Step and Fast playback mode of test results.

Our EuroBrite™ lineup provides industry leading technology with value pricing for an unmatched performance / price ratio: 

• Complete built-in control for continuous and strobe modes. 
• Adaptive Power™, a feature of the EuroBrite™ lighting controller, utilizes an onboard thermistor to maximize light output in continuous mode. 
• Adaptive Overdrive,™ another feature of the EuroBrite™ lighting controller, provides a maximal output pulse in strobe mode regardless of the exposure period. 
• IP67 sealed enclosure suitable for washdown environments. 
• Rugged construction that has been tested to withstand over 1000lb. 
• Industrial grade LEDs providing high-intensity illumination of 45klux (working distance of 200mm). 
• Daisy chain up to 4 for a combined length of 48”.

• S-parameters DC to 40 GHz, single-ended and mixed-mode 
• Impedance Profile with <1 mm resolution, differential and common mode 
• Built-in automatic calibration, no manual setup required 
• TDR-powered impedance profiling enables precise de-embedding 
• Advanced de-embedding including Time Gating and 2Xthru 
• Emulate eye diagrams with equalization and advanced jitter analysis 
• Complete NRZ and PAM analysis suite for high-speed serial data 
• All-in-one solution for testing, compliance, and diagnostics.

With their radial and flat incoming light, LUMIMAX® LED Dark Field Illuminations are the preferred option for inspecting surfaces. Their special light guide means that this LED Dark Field Illumination geometry can be used to show edges, cavities and other surface defects in high contrast.

The Dark Field Lights in the DFL series are available in several sizes for continuous and strobe mode.

Integrated controllers, powerful LEDs and standardised LUMIMAX® connections guarantee simple and stable integration of the LED Dark Field Illumination into the system environment.

• Our White High Intensity Linear Backlights offer 540 kLux output, perfect for back-lit, line-scanning applications.
• Available in pre-engineered sizes from 6” (152mm) to 96” (2438mm) in 6″ increments.
• A 3″ (75mm) length option is also available. Available intensity control provides illuminance adjustability for every 6″ increment via a 0 – 10v input.
• Available in white only. For additional wavelengths please refer to our BL138 series.

• 100 MHz, 200 MHz, 350 MHz, 500 MHz and 1 GHz bandwidths 
• Up to 4 GS/s sample rate 
• Long Memory – up to 20 Mpts 
• 10.1” capacitive touch screen display 
• 16 Digital Channel MSO option 
• MAUI - Most Advanced User Interface 
  • Designed for Touch 
  • Built for Simplicity 
  • Made to Solve 
• Advanced Anomaly Detection 
  • Fast Waveform Update 
  • History Mode - Waveform Playback 
  • WaveScan - Search and Find 
• Multi-Instrument Capabilities 
  • Protocol Analysis - Serial Trigger and Decode 
  • Waveform Generation - Built-in Function Generator 
  • Digital Voltmeter and Frequency Counter 
• Future Proof 
  • Upgradeable Bandwidth 
  • Field Upgradable Software and Hardware Options