Dualos - Fittings - NEO 805B Series
*Approximate Dimensions [inches]
** All adapters ship with 12″ Lanyard and ‘REMOVE BEFORE FLIGHT’ flag
Part Number |
Port Size 1 |
Thread End [1] |
Port Size 2 |
Thread End [2] |
A |
B |
D |
---|---|---|---|---|---|---|---|
NEO 805B-P-04 | 4, 12 | JIC-37 Degree | 4 | 0.4375-28 UNJEF Class 3A | 1.21 | – | 1.45 |
NEO 805B-P-06 | 6, 12 | JIC-37 Degree | 6 | 0.5625-24 UNJEF Class 3A | 1.47 | – | 1.45 |
NEO 805B-P-08 | 8, 12 | JIC-37 Degree | 8 | 0.7500-20 UNJEF Class 3A | 1.60 | – | 1.45 |
NEO 805B-P-10 | 10, 12 | JIC-37 Degree | 10 | 0.8750-20 UNJEF Class 3A | 1.55 | – | 1.66 |
NEO 805B-P-12 | 12 | JIC-37 Degree | 12 | 1.0625-18 UNJEF Class 3A | 1.65 | – | 1.66 |
NEO 805B-P-16 | 12 | JIC-37 Degree | 16 | 1.3125-16 UNJ Class 3A | 1.79 | – | 1.92 |
NEO 805B-P-20 | 12 | JIC-37 Degree | 20 | 1.6250-16 UNJ Class 3A | 1.85 | – | 2.22 |
More Product Information
- Two 120/240 V Outlets
- Circuitry rated for 20 A
- 8’ Flexible Power Cord
- Shrouded Safety Banana Jacks
- Stable footprint with non-slip feet
-
NEO 941 parts are AS5836 compatible (Clam Shell Clamps not Included)
-
NEO 942 parts are AS1653 compatible (Clam Shell Clamps not Included)
-
24-bit, delta-sigma ADC, simultaneous sampling
-
Programmable Sample Rate up to 128kSPS
-
Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
-
Voltage Excitation: 0.5V to 10V
-
Current Excitation: 0.46mA
-
2-Wire & 4-Wire Ohms/RTD
-
Bridge Zero Balancing
-
Built-In-Self-Test (BIST)
-
Strain Lead Wire Calibration
-
Shunt Calibration: 50kΩ, 100kΩ & External provided by User
-
TEDS Support
-
LXI Ethernet Interface
-
IEEE-1588 Synchronization
-
Power over Ethernet (PoE) or 10–50 V DC input
-
Built-in Parallel Data Streaming
-
Full-featured Embedded Web Interface
-
Compact 1U Half-rack Form Factor
- Simplify cabling between cameras and vision computer through PoE support
- Facilitate multi-camera configurations with two or four Gigabit Ethernet ports
- Trigger multiple cameras simultaneously and reliably using hardware-assisted trigger-over-Ethernet (ToE)
- Synchronize to automation devices in real-time through digital I/Os with hardware-assisted management
- Deploy pre-licensed for GigE Vision support in Aurora software, formerly Matrox Imaging Software
- Avoid the need for a separate hardware key through a license fingerprint for additional Aurora software features
- Certified for use with GigE Vision systems
-
Up to 96 differential channels per full rack mainframe
-
Constantly monitor input signals for fault conditions
-
Flexible configurations for detecting edges, out-of-bounds conditions and measuring pulse widths
-
Inputs can be masked, inverted, and combined to produce interrupts
-
Can be used as a time stamp module and as a digital I/O
-
Programmable debounce circuitry prevents erroneous readings
-
10 V and 100 V input ranges
-
On-board memory stores events with IEEE 1588 timestamps
-
Synchronize reading of input states with other scanned analog channels
-
Verify quality of optical fiber cable assemblies, connectors and short-run networks
-
Troubleshoot and distinguish between macro-bends, splices, connectors and breaks
-
Locate insertion loss points – save hours of troubleshooting time
-
Verify return loss of multiple points in a fiber assembly or harness simultaneously
-
Verify and maintain aircraft and shipboard networks
-
Customize GUI for automated pass/fail verification of your fiber assembly using software development kit
-
32GTps, PCIe 5.0 data rate operation. Fully compatible with other PCIe data rates of 2.5, 5.0, 8.0 and 16 GTps
-
Link widths to 16-lanes, including 1-, 2-, 4-, 8-lanes
-
256GB memory (128GB upstream and 128GB downstream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Simultaneous capture of multiple links is allowed with multiple simultaneous users
-
Decodes all PCIe, NVMe and CXL traffic at all layers of the stack including the TLP, DLLP, and PHY layer packets
-
Flexible trigger events include training sequences, ordered sets, queue pairs, PRPs, SGL, SMB, etc.
-
Cascade captures from up to four Xgig chassis into a single trace view
-
Full support of PCI Express LTSSM analysis
-
Field replaceable power supply
-
LEDs give quick indicators of power and link status
-
Includes one-year hardware and three-year software warranties
-
Works with the VIAVI Xgig software tool suite: Trace Control, Trace View, Expert™, Serialytics™
-
Supported by a wide variety of Interposers (CEM, U.3, etc.)
Dualos
Sometimes commercial products just won’t cut it. Dualos supplies the avionic industry with most reliable, precision manufactured hydraulic interface components in the market.
With the quality and assurance that’s expected, Dualos partners with major avionics manufacturers to solve complex engineering and test challenges. A lack of commercially available hydraulic test adapters was the problem. This opportunity laid the foundation in forming Dualos’ Hydraulic Interface Components division a decade ago.
Dualos designs, manufactures and provides logistical support for an entire family of Hydraulic Interface Components.
Contact Details
Dualos
917 Pacific Avenue, Suite 400, Tacoma, WA 98402, USA
Phone: 253-750-5125
Fax: 253-212-3539
Email: sales@dualos.com